[PATCH v3 7/9] arm64: dts: imx943: Add display pipeline nodes

[Laurentiu Palcu]

On Thu, Aug 07, 2025 at 09:31:46AM +0200, Krzysztof Kozlowski wrote:
> On Wed, Aug 06, 2025 at 06:05:14PM +0300, Laurentiu Palcu wrote:
> > Add display controller and LDB support in imx943.
> > 
> > Signed-off-by: Laurentiu Palcu <laurentiu.palcu at oss.nxp.com>
> > ---
> >  arch/arm64/boot/dts/freescale/imx943.dtsi | 55 ++++++++++++++++++++++-
> >  1 file changed, 54 insertions(+), 1 deletion(-)
> > 
> > diff --git a/arch/arm64/boot/dts/freescale/imx943.dtsi b/arch/arm64/boot/dts/freescale/imx943.dtsi
> > index 657c81b6016f2..70dec03c5608e 100644
> > --- a/arch/arm64/boot/dts/freescale/imx943.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/imx943.dtsi
> > @@ -148,7 +148,7 @@ l3_cache: l3-cache {
> >  		};
> >  	};
> >  
> > -	clock-ldb-pll-div7 {
> > +	clock_ldb_pll_div7: clock-ldb-pll-div7 {
> >  		compatible = "fixed-factor-clock";
> >  		#clock-cells = <0>;
> >  		clocks = <&scmi_clk IMX94_CLK_LDBPLL>;
> > @@ -174,9 +174,62 @@ dispmix_csr: syscon at 4b010000 {
> >  		lvds_csr: syscon at 4b0c0000 {
> >  			compatible = "nxp,imx94-lvds-csr", "syscon";
> >  			reg = <0x0 0x4b0c0000 0x0 0x10000>;
> > +			#address-cells = <1>;
> > +			#size-cells = <1>;
> >  			clocks = <&scmi_clk IMX94_CLK_DISPAPB>;
> >  			#clock-cells = <1>;
> >  			power-domains = <&scmi_devpd IMX94_PD_DISPLAY>;
> > +
> > +			ldb: ldb at 4 {
> > +				compatible = "fsl,imx94-ldb";
> > +				reg = <0x4 0x4>, <0x8 0x4>;
> > +				#address-cells = <1>;
> > +				#size-cells = <0>;
> 
> Why? There are no children with addressing. You never tested it because
> this would easily be flagged by tools.
I tested it but I realized I only checked the DTB against the
nxp,imx94-dcif.yaml schema... :/ After adding the fsl,ldb.yaml, the
error popped up. Thanks for the heads-up.

> 
> > +				reg-names = "ldb", "lvds";
> 
> Follow DTS coding style.
If this is about 'reg-names' not being immediately after 'reg', then
this will be fixed since 'address-cells' and 'size-cells' will be
removed. Or is it something else?

Thanks,
Laurentiu

> 
> Best regards,
> Krzysztof
>