[PATCH] arm64: dts: st: Add memory-region-names property for stm32mp257f-ev1

[Patrice CHOTARD]

On 8/6/25 10:23, Krzysztof Kozlowski wrote:
> On 06/08/2025 10:09, Patrice Chotard wrote:
>> Add memory-region-names property for stm32mp257f-ev1.
>> This allows to identify and check memory-map area's configuration.
> 
> No, first entry is already identified.

ok

> 
>>
>> Cc: stable at vger.kernel.org
>> Fixes: cad2492de91c ("arm64: dts: st: Add SPI NOR flash support on stm32mp257f-ev1 board")
>>
> 
> No blank lines.

ok
> 
>> Signed-off-by: Patrice Chotard <patrice.chotard at foss.st.com>
>> ---
>>  arch/arm64/boot/dts/st/stm32mp257f-ev1.dts | 1 +
>>  1 file changed, 1 insertion(+)
>>
>> diff --git a/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts b/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts
>> index 2f561ad4066544445e93db78557bc4be1c27095a..16309029758cf24834f406f5203046ded371a8f9 100644
>> --- a/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts
>> +++ b/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts
>> @@ -197,6 +197,7 @@ &i2c8 {
>>  
>>  &ommanager {
>>  	memory-region = <&mm_ospi1>;
>> +	memory-region-names = "mm_ospi1";
> 
> It does not look like you tested the DTS against bindings. Please run
> `make dtbs_check W=1` (see

My bad, i am preparing the v2.

Thanks

> Documentation/devicetree/bindings/writing-schema.rst or
> https://www.linaro.org/blog/tips-and-tricks-for-validating-devicetree-sources-with-the-devicetree-schema/
> for instructions).
> Maybe you need to update your dtschema and yamllint. Don't rely on
> distro packages for dtschema and be sure you are using the latest
> released dtschema.
> 
> Best regards,
> Krzysztof