[PATCH] arm64: dts: ti: k3-am62a-phycore-som: Add 1.4GHz opp entry

[Wadim Egorov]

The phyCORE-AM62Ax is capable of supplying 0v85 to the VDD_CORE
which allows the Cortex-A53s to operate at 1.4GHz according to chapter
7.5 of the SoC's data sheet[0]. Append the 1.4Ghz entry to the OPP table
to enable this OPP

[0] https://www.ti.com/lit/ds/symlink/am62a3.pdf

Signed-off-by: Wadim Egorov <w.egorov at phytec.de>
---
 arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi
index 5dc5d2cb20cc..207ca00630d1 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi
@@ -200,6 +200,15 @@ AM62AX_IOPAD(0x1f4, PIN_INPUT, 0) /* (D16) EXTINTn */
 	};
 };
 
+&a53_opp_table {
+	/* Requires VDD_CORE at 0v85 */
+	opp-1400000000 {
+		opp-hz = /bits/ 64 <1400000000>;
+		opp-supported-hw = <0x01 0x0004>;
+		clock-latency-ns = <6000000>;
+	};
+};
+
 &c7x_0 {
 	mboxes = <&mailbox0_cluster1 &mbox_c7x_0>;
 	memory-region = <&c7x_0_dma_memory_region>,
-- 
2.48.1