[PATCH 0/3] arm64: zynqmp: Add support for kr260 and kd240

[Michal Simek]

On 7/18/25 13:24, Michal Simek wrote:
> Hi,
> 
> add description for k24 and kr260 with kd240 boards.
> Pretty much both k24 and k26 SOMs can be plugged to other carrier cards but
> not all combinations are tested together.
> 
> Thanks,
> Michal
> 
> 
> Michal Simek (3):
>    dt-bindings: soc: xilinx: Add support for K24, KR260 and KD240 CCs
>    arm64: zynqmp: Add support for kr260 board
>    arm64: zynqmp: Add support for kd240 board
> 
>   .../bindings/soc/xilinx/xilinx.yaml           |  81 ++++
>   arch/arm64/boot/dts/xilinx/Makefile           |  24 +
>   .../boot/dts/xilinx/zynqmp-sck-kd-g-revA.dtso | 390 +++++++++++++++
>   .../boot/dts/xilinx/zynqmp-sck-kr-g-revA.dtso | 438 +++++++++++++++++
>   .../boot/dts/xilinx/zynqmp-sck-kr-g-revB.dtso | 451 ++++++++++++++++++
>   .../boot/dts/xilinx/zynqmp-sm-k24-revA.dts    |  23 +
>   .../boot/dts/xilinx/zynqmp-smk-k24-revA.dts   |  21 +
>   7 files changed, 1428 insertions(+)
>   create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-sck-kd-g-revA.dtso
>   create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-sck-kr-g-revA.dtso
>   create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-sck-kr-g-revB.dtso
>   create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-sm-k24-revA.dts
>   create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-smk-k24-revA.dts
> 

Applied.
M
-- 
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Xilinx Microblaze
Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP/Versal ARM64 SoCs
U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal/Versal NET SoCs
TF-A maintainer - Xilinx ZynqMP/Versal/Versal NET SoCs