[PATCH v6 1/5] media: dt-bindings: Add qcom,sc7280-camss

Vladimir Zapolskiy vladimir.zapolskiy at linaro.org
Wed Nov 27 04:57:08 PST 2024


On 11/27/24 12:04, Vikram Sharma wrote:
> Add bindings for qcom,sc7280-camss to support the camera subsystem
> on the SC7280 platform.
> 
> Signed-off-by: Suresh Vankadara <quic_svankada at quicinc.com>
> Signed-off-by: Trishansh Bhardwaj <quic_tbhardwa at quicinc.com>
> Signed-off-by: Vikram Sharma <quic_vikramsa at quicinc.com>
> ---
>   .../bindings/media/qcom,sc7280-camss.yaml     | 415 ++++++++++++++++++
>   1 file changed, 415 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/media/qcom,sc7280-camss.yaml
> 
> diff --git a/Documentation/devicetree/bindings/media/qcom,sc7280-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sc7280-camss.yaml
> new file mode 100644
> index 000000000000..6fafb3631b15
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/qcom,sc7280-camss.yaml
> @@ -0,0 +1,415 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/qcom,sc7280-camss.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm SC7280 CAMSS ISP
> +
> +maintainers:
> +  - Azam Sadiq Pasha Kapatrala Syed <akapatra at quicinc.com>
> +  - Hariram Purushothaman <hariramp at quicinc.com>
> +
> +description:
> +  The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms.
> +
> +properties:
> +  compatible:
> +    const: qcom,sc7280-camss
> +
> +  reg:
> +    maxItems: 15
> +
> +  reg-names:
> +    items:
> +      - const: csid0
> +      - const: csid0_lite
> +      - const: csid1
> +      - const: csid1_lite
> +      - const: csid2
> +      - const: csiphy0
> +      - const: csiphy1
> +      - const: csiphy2
> +      - const: csiphy3
> +      - const: csiphy4
> +      - const: vfe0
> +      - const: vfe0_lite
> +      - const: vfe1
> +      - const: vfe1_lite
> +      - const: vfe2
> +
> +  clocks:
> +    maxItems: 32
> +
> +  clock-names:
> +    items:
> +      - const: camnoc_axi
> +      - const: csiphy0
> +      - const: csiphy0_timer
> +      - const: csiphy1
> +      - const: csiphy1_timer
> +      - const: csiphy2
> +      - const: csiphy2_timer
> +      - const: csiphy3
> +      - const: csiphy3_timer
> +      - const: csiphy4
> +      - const: csiphy4_timer
> +      - const: gcc_camera_ahb
> +      - const: gcc_cam_hf_axi
> +      - const: soc_ahb
> +      - const: vfe0
> +      - const: vfe0_axi
> +      - const: vfe0_cphy_rx
> +      - const: vfe0_csid
> +      - const: vfe0_lite
> +      - const: vfe0_lite_cphy_rx
> +      - const: vfe0_lite_csid
> +      - const: vfe1
> +      - const: vfe1_axi
> +      - const: vfe1_cphy_rx
> +      - const: vfe1_csid
> +      - const: vfe1_lite
> +      - const: vfe1_lite_cphy_rx
> +      - const: vfe1_lite_csid
> +      - const: vfe2
> +      - const: vfe2_axi
> +      - const: vfe2_cphy_rx
> +      - const: vfe2_csid
> +
> +  interrupts:
> +    maxItems: 15
> +
> +  interrupt-names:
> +    items:
> +      - const: csid0
> +      - const: csid0_lite
> +      - const: csid1
> +      - const: csid1_lite
> +      - const: csid2
> +      - const: csiphy0
> +      - const: csiphy1
> +      - const: csiphy2
> +      - const: csiphy3
> +      - const: csiphy4
> +      - const: vfe0
> +      - const: vfe0_lite
> +      - const: vfe1
> +      - const: vfe1_lite
> +      - const: vfe2
> +
> +  interconnects:
> +    maxItems: 2
> +
> +  interconnect-names:
> +    items:
> +      - const: ahb
> +      - const: hf_0
> +
> +  iommus:
> +    maxItems: 1
> +
> +  power-domains:
> +    items:
> +      - description: IFE0 GDSC - Image Front End, Global Distributed Switch Controller.
> +      - description: IFE1 GDSC - Image Front End, Global Distributed Switch Controller.
> +      - description: IFE2 GDSC - Image Front End, Global Distributed Switch Controller.
> +      - description: Titan GDSC - Titan ISP Block, Global Distributed Switch Controller.
> +
> +  power-domain-names:
> +    items:
> +      - const: ife0
> +      - const: ife1
> +      - const: ife2
> +      - const: top
> +
> +  vdda-phy-supply:
> +    description:
> +      Phandle to a regulator supply to PHY core block.
> +
> +  vdda-pll-supply:
> +    description:
> +      Phandle to 1.8V regulator supply to PHY refclk pll block.
> +
> +  ports:
> +    $ref: /schemas/graph.yaml#/properties/ports
> +
> +    description:
> +      CSI input ports.
> +
> +    properties:
> +      port at 0:
> +        $ref: /schemas/graph.yaml#/$defs/port-base
> +        unevaluatedProperties: false
> +        description:
> +          Input port for receiving CSI data on CSIPHY 0.
> +
> +        properties:
> +          endpoint:
> +            $ref: video-interfaces.yaml#
> +            unevaluatedProperties: false
> +
> +            properties:
> +              data-lanes:
> +                minItems: 1
> +                maxItems: 4
> +
> +            required:
> +              - data-lanes
> +
> +      port at 1:
> +        $ref: /schemas/graph.yaml#/$defs/port-base
> +        unevaluatedProperties: false
> +        description:
> +          Input port for receiving CSI data on CSIPHY 1.
> +
> +        properties:
> +          endpoint:
> +            $ref: video-interfaces.yaml#
> +            unevaluatedProperties: false
> +
> +            properties:
> +              data-lanes:
> +                minItems: 1
> +                maxItems: 4
> +
> +            required:
> +              - data-lanes
> +
> +      port at 2:
> +        $ref: /schemas/graph.yaml#/$defs/port-base
> +        unevaluatedProperties: false
> +        description:
> +          Input port for receiving CSI data on CSIPHY 2.
> +
> +        properties:
> +          endpoint:
> +            $ref: video-interfaces.yaml#
> +            unevaluatedProperties: false
> +
> +            properties:
> +              data-lanes:
> +                minItems: 1
> +                maxItems: 4
> +
> +            required:
> +              - data-lanes
> +
> +      port at 3:
> +        $ref: /schemas/graph.yaml#/$defs/port-base
> +        unevaluatedProperties: false
> +        description:
> +          Input port for receiving CSI data on CSIPHY 3.
> +
> +        properties:
> +          endpoint:
> +            $ref: video-interfaces.yaml#
> +            unevaluatedProperties: false
> +
> +            properties:
> +              data-lanes:
> +                minItems: 1
> +                maxItems: 4
> +
> +            required:
> +              - data-lanes
> +
> +      port at 4:
> +        $ref: /schemas/graph.yaml#/$defs/port-base
> +        unevaluatedProperties: false
> +        description:
> +          Input port for receiving CSI data on CSIPHY 4.
> +
> +        properties:
> +          endpoint:
> +            $ref: video-interfaces.yaml#
> +            unevaluatedProperties: false
> +
> +            properties:
> +              data-lanes:
> +                minItems: 1
> +                maxItems: 4
> +
> +            required:
> +              - data-lanes
> +
> +required:
> +  - compatible
> +  - reg
> +  - reg-names
> +  - clocks
> +  - clock-names
> +  - interrupts
> +  - interrupt-names
> +  - interconnects
> +  - interconnect-names
> +  - iommus
> +  - power-domains
> +  - power-domain-names
> +  - vdda-phy-supply
> +  - vdda-pll-supply
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/qcom,camcc-sc7280.h>
> +    #include <dt-bindings/clock/qcom,gcc-sc7280.h>
> +    #include <dt-bindings/interconnect/qcom,sc7280.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/power/qcom-rpmpd.h>
> +
> +    soc {
> +        #address-cells = <2>;
> +        #size-cells = <2>;
> +
> +        camss: camss at acaf000 {
> +            compatible = "qcom,sc7280-camss";
> +
> +            reg = <0x0 0x0acb3000 0x0 0x1000>,
> +                  <0x0 0x0acc8000 0x0 0x1000>,

Unsurprisingly above is the error, which has been already reported for
enumerous amount of times, I wish to stop poking it eventually, please
reference to the previously given review comments and fix all of them
before sending a new version of the changes.

--
Best wishes,
Vladimir



More information about the linux-arm-kernel mailing list