[PATCH v2 0/4] iio: temperature: Add support for P3T1085

[Guenter Roeck]

On 11/8/24 14:26, Frank Li wrote:
> Add basic function support for P3T1085 temperature sensor.
> - reuse tmp108 driver
> - Update imx93-9x9-qsb.dts
> 

Subject 'iio' is now misleading.

Thanks,
Guenter

> To: Rob Herring <robh at kernel.org>
> To: Krzysztof Kozlowski <krzk+dt at kernel.org>
> To: Conor Dooley <conor+dt at kernel.org>
> To: Jonathan Cameron <jic23 at kernel.org>
> To: Lars-Peter Clausen <lars at metafoo.de>
> To: Shawn Guo <shawnguo at kernel.org>
> To: Sascha Hauer <s.hauer at pengutronix.de>
> To: Pengutronix Kernel Team <kernel at pengutronix.de>
> To: Fabio Estevam <festevam at gmail.com>
> To: Jean Delvare <jdelvare at suse.com>
> To: Guenter Roeck <linux at roeck-us.net>
> Cc: devicetree at vger.kernel.org
> Cc: linux-kernel at vger.kernel.org
> Cc: linux-iio at vger.kernel.org
> Cc: imx at lists.linux.dev
> Cc: linux-arm-kernel at lists.infradead.org
> Cc: Krzysztof Kozlowski <krzk at kernel.org>
> Cc: linux-hwmon at vger.kernel.org
> Signed-off-by: Frank Li <Frank.Li at nxp.com>
> 
> Changes in v2:
> - Amost rewrite and reuse existed TMP108 driver
> - Link to v1: https://lore.kernel.org/r/20241107-p3t1085-v1-0-9a76cb85673f@nxp.com
> 
> ---
> Frank Li (4):
>        dt-bindings: hwmon: ti,tmp108: Add nxp,p3t1085 compatible string
>        hwmon: tmp108: Add help function tmp108_common_probe()
>        hwmon: tmp108: Add support for I3C device
>        arm64: dts: imx93-9x9-qsb: add temp-sensor nxp,p3t1085
> 
>   .../devicetree/bindings/hwmon/ti,tmp108.yaml       |  8 ++-
>   arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts    |  5 ++
>   drivers/hwmon/tmp108.c                             | 71 ++++++++++++++++------
>   3 files changed, 64 insertions(+), 20 deletions(-)
> ---
> base-commit: 74741a050b79d31d8d2eeee12c77736596d0a6b2
> change-id: 20241107-p3t1085-fbd8726cbc0e
> 
> Best regards,
> ---
> Frank Li <Frank.Li at nxp.com>
>