[PATCH] arm64: dts: mediatek: cherry: Specify pull resistance for RSEL GPIOs

Nícolas F. R. A. Prado nfraprado at collabora.com
Fri May 31 14:51:09 PDT 2024


GPIOs 34 and 35 on MT8195 are of type MTK_PULL_PU_PD_RSEL_TYPE, meaning
not only can they be configured as pull-up or pull-down, but the pull
resistance can also be configured.

The current bias setting however doesn't specify a resistance value,
resulting on the following errors:

mt8195-pinctrl 10005000.pinctrl: Not support rsel value 1 Ohm for pin = 34 (GPIO34)
mt8195-pinctrl 10005000.pinctrl: Not support rsel value 1 Ohm for pin = 35 (GPIO35)

Specify the pull resistance for those GPIOs to fix the errors.

Fixes: 5bf7dabe40f2 ("arm64: dts: mediatek: cherry: Document gpios and add default pin config")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado at collabora.com>
---
 arch/arm64/boot/dts/mediatek/mt8195-cherry-dojo-r1.dts   | 11 ++++++++---
 arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts | 11 ++++++++---
 arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r3.dts | 11 ++++++++---
 3 files changed, 24 insertions(+), 9 deletions(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry-dojo-r1.dts b/arch/arm64/boot/dts/mediatek/mt8195-cherry-dojo-r1.dts
index 88123842c818..49664de99b88 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195-cherry-dojo-r1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry-dojo-r1.dts
@@ -82,12 +82,17 @@ &pio_default {
 	pins-low-power-hdmi-disable {
 		pinmux = <PINMUX_GPIO31__FUNC_GPIO31>,
 			 <PINMUX_GPIO32__FUNC_GPIO32>,
-			 <PINMUX_GPIO33__FUNC_GPIO33>,
-			 <PINMUX_GPIO34__FUNC_GPIO34>,
-			 <PINMUX_GPIO35__FUNC_GPIO35>;
+			 <PINMUX_GPIO33__FUNC_GPIO33>;
 		input-enable;
 		bias-pull-down;
 	};
+
+	pins-low-power-hdmi-rsel-disable {
+		pinmux = <PINMUX_GPIO34__FUNC_GPIO34>,
+			 <PINMUX_GPIO35__FUNC_GPIO35>;
+		input-enable;
+		bias-pull-down = <75000>;
+	};
 };
 
 &sound {
diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts
index 2fe20e0dad83..2d6522c144b7 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts
@@ -19,13 +19,18 @@ &pio_default {
 	pins-low-power-hdmi-disable {
 		pinmux = <PINMUX_GPIO31__FUNC_GPIO31>,
 			 <PINMUX_GPIO32__FUNC_GPIO32>,
-			 <PINMUX_GPIO33__FUNC_GPIO33>,
-			 <PINMUX_GPIO34__FUNC_GPIO34>,
-			 <PINMUX_GPIO35__FUNC_GPIO35>;
+			 <PINMUX_GPIO33__FUNC_GPIO33>;
 		input-enable;
 		bias-pull-down;
 	};
 
+	pins-low-power-hdmi-rsel-disable {
+		pinmux = <PINMUX_GPIO34__FUNC_GPIO34>,
+			 <PINMUX_GPIO35__FUNC_GPIO35>;
+		input-enable;
+		bias-pull-down = <75000>;
+	};
+
 	pins-low-power-pcie0-disable {
 		pinmux = <PINMUX_GPIO19__FUNC_GPIO19>,
 			 <PINMUX_GPIO20__FUNC_GPIO20>,
diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r3.dts b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r3.dts
index dd294ca98194..9049d362a5e0 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r3.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r3.dts
@@ -20,13 +20,18 @@ &pio_default {
 	pins-low-power-hdmi-disable {
 		pinmux = <PINMUX_GPIO31__FUNC_GPIO31>,
 			 <PINMUX_GPIO32__FUNC_GPIO32>,
-			 <PINMUX_GPIO33__FUNC_GPIO33>,
-			 <PINMUX_GPIO34__FUNC_GPIO34>,
-			 <PINMUX_GPIO35__FUNC_GPIO35>;
+			 <PINMUX_GPIO33__FUNC_GPIO33>;
 		input-enable;
 		bias-pull-down;
 	};
 
+	pins-low-power-hdmi-rsel-disable {
+		pinmux = <PINMUX_GPIO34__FUNC_GPIO34>,
+			 <PINMUX_GPIO35__FUNC_GPIO35>;
+		input-enable;
+		bias-pull-down = <75000>;
+	};
+
 	pins-low-power-pcie0-disable {
 		pinmux = <PINMUX_GPIO19__FUNC_GPIO19>,
 			 <PINMUX_GPIO20__FUNC_GPIO20>,

---
base-commit: 0e1980c40b6edfa68b6acf926bab22448a6e40c9
change-id: 20240531-tomato-rsel-gpio34-35-fix-185acda05c17

Best regards,
-- 
Nícolas F. R. A. Prado <nfraprado at collabora.com>




More information about the linux-arm-kernel mailing list