[PATCH net-next 3/6] net: phylink: rename ovr_an_inband to default_an_inband

[Russell King (Oracle)]

Since ovr_an_inband no longer overrides every MLO_AN_xxx mode, rename
it to reflect what it now does - it changes the default mode from
MLO_AN_PHY to MLO_AN_INBAND. Fix up the two users of this.

Signed-off-by: Russell King (Oracle) <rmk+kernel at armlinux.org.uk>
---
 drivers/net/ethernet/freescale/fman/fman_memac.c  | 2 +-
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 2 +-
 drivers/net/phy/phylink.c                         | 2 +-
 include/linux/phylink.h                           | 5 +++--
 4 files changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/freescale/fman/fman_memac.c b/drivers/net/ethernet/freescale/fman/fman_memac.c
index 92b8f4ab26f1..9c44a3581950 100644
--- a/drivers/net/ethernet/freescale/fman/fman_memac.c
+++ b/drivers/net/ethernet/freescale/fman/fman_memac.c
@@ -1232,7 +1232,7 @@ int memac_initialization(struct mac_device *mac_dev,
 	    !of_property_read_bool(mac_node, "managed") &&
 	    mac_dev->phy_if != PHY_INTERFACE_MODE_MII &&
 	    !phy_interface_mode_is_rgmii(mac_dev->phy_if))
-		mac_dev->phylink_config.ovr_an_inband = true;
+		mac_dev->phylink_config.default_an_inband = true;
 	of_node_put(fixed);
 
 	err = memac_init(mac_dev->fman_mac);
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index ca19b232431a..488b2fd2349c 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1221,7 +1221,7 @@ static int stmmac_phy_setup(struct stmmac_priv *priv)
 
 	mdio_bus_data = priv->plat->mdio_bus_data;
 	if (mdio_bus_data)
-		priv->phylink_config.ovr_an_inband =
+		priv->phylink_config.default_an_inband =
 			mdio_bus_data->xpcs_an_inband;
 
 	/* Set the platform/firmware specified interface mode. Note, phylink
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index c81f1c1ee675..02427378acfd 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -885,7 +885,7 @@ static int phylink_parse_mode(struct phylink *pl,
 	const char *managed;
 	unsigned long caps;
 
-	if (pl->config->ovr_an_inband)
+	if (pl->config->default_an_inband)
 		pl->cfg_link_an_mode = MLO_AN_INBAND;
 
 	dn = fwnode_get_named_child_node(fwnode, "fixed-link");
diff --git a/include/linux/phylink.h b/include/linux/phylink.h
index 5ea6b2ad2396..a30a692acc32 100644
--- a/include/linux/phylink.h
+++ b/include/linux/phylink.h
@@ -141,7 +141,8 @@ enum phylink_op_type {
  * @mac_requires_rxc: if true, the MAC always requires a receive clock from PHY.
  *                    The PHY driver should start the clock signal as soon as
  *                    possible and avoid stopping it during suspend events.
- * @ovr_an_inband: if true, override PCS to MLO_AN_INBAND
+ * @default_an_inband: if true, defaults to MLO_AN_INBAND rather than
+ *		       MLO_AN_PHY. A fixed-link specification will override.
  * @get_fixed_state: callback to execute to determine the fixed link state,
  *		     if MAC link is at %MLO_AN_FIXED mode.
  * @supported_interfaces: bitmap describing which PHY_INTERFACE_MODE_xxx
@@ -154,7 +155,7 @@ struct phylink_config {
 	bool poll_fixed_state;
 	bool mac_managed_pm;
 	bool mac_requires_rxc;
-	bool ovr_an_inband;
+	bool default_an_inband;
 	void (*get_fixed_state)(struct phylink_config *config,
 				struct phylink_link_state *state);
 	DECLARE_PHY_INTERFACE_MASK(supported_interfaces);
-- 
2.30.2