[PATCH v4 2/4] arm64: dts: ti: k3-j784s4-evm: Enable PCIe0 and PCIe1 in RC Mode

[Siddharth Vadapalli]

Enable PCIe0 and PCIe1 instances of PCIe in Root Complex mode of
operation on J784S4 EVM. The lanes of PCIe0 are connected to Serdes1
instance of Serdes while the lanes of PCIe1 are connected to Serdes0
instance of Serdes in J784S4 SoC. Despite both PCIe instances supporting
up to 4 Lanes, since the physical connections to the PCIe connector
corresponding to the PCIe1 instance of PCIe are limited to 2 Lanes on
the J784S4 EVM, update the "num-lanes" property of PCIe1 accordingly.

Signed-off-by: Siddharth Vadapalli <s-vadapalli at ti.com>
---
v3:
https://lore.kernel.org/r/20240523111008.4057988-3-s-vadapalli@ti.com/
No changes since v3.

 arch/arm64/boot/dts/ti/k3-j784s4-evm.dts | 46 ++++++++++++++++++++++++
 1 file changed, 46 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
index d511b25d62e3..31e88a6445f4 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
@@ -1105,3 +1105,49 @@ dp0_out: endpoint {
 		};
 	};
 };
+
+&serdes0 {
+	status = "okay";
+	serdes0_pcie1_link: phy at 0 {
+		reg = <0>;
+		cdns,num-lanes = <4>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_PCIE>;
+		resets = <&serdes_wiz0 1>, <&serdes_wiz0 2>,
+			 <&serdes_wiz0 3>, <&serdes_wiz0 4>;
+	};
+};
+
+&serdes_wiz0 {
+	status = "okay";
+};
+
+&pcie1_rc {
+	status = "okay";
+	num-lanes = <2>;
+	reset-gpios = <&exp1 2 GPIO_ACTIVE_HIGH>;
+	phys = <&serdes0_pcie1_link>;
+	phy-names = "pcie-phy";
+};
+
+&serdes1 {
+	status = "okay";
+	serdes1_pcie0_link: phy at 0 {
+		reg = <0>;
+		cdns,num-lanes = <2>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_PCIE>;
+		resets = <&serdes_wiz1 1>, <&serdes_wiz1 2>;
+	};
+};
+
+&serdes_wiz1 {
+	status = "okay";
+};
+
+&pcie0_rc {
+	status = "okay";
+	reset-gpios = <&exp1 6 GPIO_ACTIVE_HIGH>;
+	phys = <&serdes1_pcie0_link>;
+	phy-names = "pcie-phy";
+};
-- 
2.40.1