[PATCH v2 0/4] Add overlays to disable optional hardware in k3-am6xx-phycore-som boards

Nathan Morrisson nmorrisson at phytec.com
Tue May 28 15:51:33 PDT 2024


Add three overlays to disable the eth phy, rtc, and spi nor. These
overlays will be used to disable device tree nodes for components
that are optionally not populated.

v2:
  - Add build time tests in makefile

Nathan Morrisson (4):
  arm64: dts: ti: k3-am64-phycore-som: Add serial_flash label
  arm64: dts: ti: k3-am6xx-phycore-som: Add overlay to disable eth phy
  arm64: dts: ti: k3-am6xx-phycore-som: Add overlay to disable rtc
  arm64: dts: ti: k3-am6xx-phycore-som: Add overlay to disabl spi nor

 arch/arm64/boot/dts/ti/Makefile               | 17 +++++++++++++++++
 .../boot/dts/ti/k3-am64-phycore-som.dtsi      |  2 +-
 .../ti/k3-am6xx-phycore-disable-eth-phy.dtso  | 19 +++++++++++++++++++
 .../dts/ti/k3-am6xx-phycore-disable-rtc.dtso  | 15 +++++++++++++++
 .../ti/k3-am6xx-phycore-disable-spi-nor.dtso  | 15 +++++++++++++++
 5 files changed, 67 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am6xx-phycore-disable-eth-phy.dtso
 create mode 100644 arch/arm64/boot/dts/ti/k3-am6xx-phycore-disable-rtc.dtso
 create mode 100644 arch/arm64/boot/dts/ti/k3-am6xx-phycore-disable-spi-nor.dtso

-- 
2.25.1




More information about the linux-arm-kernel mailing list