[PATCH v6 3/8] soc: mediatek: cmdq: Add cmdq_pkt_logic_command to support math operation

AngeloGioacchino Del Regno angelogioacchino.delregno at collabora.com
Tue May 28 03:24:47 PDT 2024


Il 26/05/24 01:08, Jason-JH.Lin ha scritto:
> Add cmdq_pkt_logic_command to support math operation.
> 
> cmdq_pkt_logic_command can append logic command to the CMDQ packet,
> ask GCE to execute a arithmetic calculate instruction,
> such as add, subtract, multiply, AND, OR and NOT, etc.
> 
> Note that all arithmetic instructions are unsigned calculations.
> If there are any overflows, GCE will sent the invalid IRQ to notify
> CMDQ driver.
> 
> Signed-off-by: Jason-JH.Lin <jason-jh.lin at mediatek.com>
> Signed-off-by: Hsiao Chien Sung <shawn.sung at mediatek.com>
> ---
>   drivers/soc/mediatek/mtk-cmdq-helper.c | 36 ++++++++++++++++++++++
>   include/linux/soc/mediatek/mtk-cmdq.h  | 42 ++++++++++++++++++++++++++
>   2 files changed, 78 insertions(+)
> 
> diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
> index 046522664dc1..42fae05f61a8 100644
> --- a/drivers/soc/mediatek/mtk-cmdq-helper.c
> +++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
> @@ -15,10 +15,19 @@
>   /* dedicate the last GPR_R15 to assign the register address to be poll */
>   #define CMDQ_POLL_ADDR_GPR	(15)
>   #define CMDQ_EOC_IRQ_EN		BIT(0)
> +#define CMDQ_IMMEDIATE_VALUE	0
>   #define CMDQ_REG_TYPE		1
>   #define CMDQ_JUMP_RELATIVE	0
>   #define CMDQ_JUMP_ABSOLUTE	1
>   
> +#define CMDQ_OPERAND_GET_IDX_VALUE(operand) \
> +	({ \
> +		struct cmdq_operand *op = operand; \
> +		op->reg ? op->idx : op->value; \
> +	})

I think this CMDQ_OPERAND_GET_IDX_VALUE would be better expressed as a (inline?)
function instead...

static inline u16 cmdq_operand_get_idx_value(struct cmdq_operand *op)
{
	return op->reg ? op->idx : op->value;
}

and maybe the same for the other definition too..

static inline u16 cmdq_operand_type(struct cmdq_operand *op)
{
	return op->reg ? CMDQ_REG_TYPE : CMDQ_IMMEDIATE_VALUE;
}

but definitely the first one is what I don't like much, the second one can pass.

Cheers,
Angelo

> +#define CMDQ_OPERAND_TYPE(operand) \
> +	((operand)->reg ? CMDQ_REG_TYPE : CMDQ_IMMEDIATE_VALUE)
> +
>   struct cmdq_instruction {
>   	union {
>   		u32 value;
> @@ -461,6 +470,33 @@ int cmdq_pkt_poll_addr(struct cmdq_pkt *pkt, dma_addr_t addr, u32 value, u32 mas
>   }
>   EXPORT_SYMBOL(cmdq_pkt_poll_addr);
>   
> +int cmdq_pkt_logic_command(struct cmdq_pkt *pkt, u16 result_reg_idx,
> +			   struct cmdq_operand *left_operand,
> +			   enum cmdq_logic_op s_op,
> +			   struct cmdq_operand *right_operand)
> +{
> +	struct cmdq_instruction inst = { {0} };
> +	u32 left_idx_value;
> +	u32 right_idx_value;
> +
> +	if (!left_operand || !right_operand || s_op >= CMDQ_LOGIC_MAX)
> +		return -EINVAL;
> +
> +	left_idx_value = CMDQ_OPERAND_GET_IDX_VALUE(left_operand);
> +	right_idx_value = CMDQ_OPERAND_GET_IDX_VALUE(right_operand);
> +	inst.op = CMDQ_CODE_LOGIC;
> +	inst.dst_t = CMDQ_REG_TYPE;
> +	inst.src_t = CMDQ_OPERAND_TYPE(left_operand);
> +	inst.arg_c_t = CMDQ_OPERAND_TYPE(right_operand);
> +	inst.sop = s_op;
> +	inst.reg_dst = result_reg_idx;
> +	inst.src_reg = left_idx_value;
> +	inst.arg_c = right_idx_value;
> +
> +	return cmdq_pkt_append_command(pkt, inst);
> +}
> +EXPORT_SYMBOL(cmdq_pkt_logic_command);
> +
>   int cmdq_pkt_assign(struct cmdq_pkt *pkt, u16 reg_idx, u32 value)
>   {
>   	struct cmdq_instruction inst = {};
> diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
> index d4a8e34505e6..5bee6f7fc400 100644
> --- a/include/linux/soc/mediatek/mtk-cmdq.h
> +++ b/include/linux/soc/mediatek/mtk-cmdq.h
> @@ -25,6 +25,31 @@
>   
>   struct cmdq_pkt;
>   
> +enum cmdq_logic_op {
> +	CMDQ_LOGIC_ASSIGN = 0,
> +	CMDQ_LOGIC_ADD = 1,
> +	CMDQ_LOGIC_SUBTRACT = 2,
> +	CMDQ_LOGIC_MULTIPLY = 3,
> +	CMDQ_LOGIC_XOR = 8,
> +	CMDQ_LOGIC_NOT = 9,
> +	CMDQ_LOGIC_OR = 10,
> +	CMDQ_LOGIC_AND = 11,
> +	CMDQ_LOGIC_LEFT_SHIFT = 12,
> +	CMDQ_LOGIC_RIGHT_SHIFT = 13,
> +	CMDQ_LOGIC_MAX,
> +};
> +
> +struct cmdq_operand {
> +	/* register type */
> +	bool reg;
> +	union {
> +		/* index */
> +		u16 idx;
> +		/* value */
> +		u16 value;
> +	};
> +};
> +
>   struct cmdq_client_reg {
>   	u8 subsys;
>   	u16 offset;
> @@ -272,6 +297,23 @@ int cmdq_pkt_poll(struct cmdq_pkt *pkt, u8 subsys,
>   int cmdq_pkt_poll_mask(struct cmdq_pkt *pkt, u8 subsys,
>   		       u16 offset, u32 value, u32 mask);
>   
> +/**
> + * cmdq_pkt_logic_command() - Append logic command to the CMDQ packet, ask GCE to
> + *		          execute an instruction that store the result of logic operation
> + *		          with left and right operand into result_reg_idx.
> + * @pkt:		the CMDQ packet
> + * @result_reg_idx:	SPR index that store operation result of left_operand and right_operand
> + * @left_operand:	left operand
> + * @s_op:		the logic operator enum
> + * @right_operand:	right operand
> + *
> + * Return: 0 for success; else the error code is returned
> + */
> +int cmdq_pkt_logic_command(struct cmdq_pkt *pkt, u16 result_reg_idx,
> +			   struct cmdq_operand *left_operand,
> +			   enum cmdq_logic_op s_op,
> +			   struct cmdq_operand *right_operand);
> +
>   /**
>    * cmdq_pkt_assign() - Append logic assign command to the CMDQ packet, ask GCE
>    *		       to execute an instruction that set a constant value into






More information about the linux-arm-kernel mailing list