[PATCH] arm64: dts: rockchip: Fix the DCDC_REG2 minimum voltage on Quartz64 Model B

[Heiko Stuebner]

On Mon, 20 May 2024 19:20:28 +0200, Dragan Simic wrote:
> Correct the specified regulator-min-microvolt value for the buck DCDC_REG2
> regulator, which is part of the Rockchip RK809 PMIC, in the Pine64 Quartz64
> Model B board dts.  According to the RK809 datasheet, version 1.01, this
> regulator is capable of producing voltages as low as 0.5 V on its output,
> instead of going down to 0.9 V only, which is additionally confirmed by the
> regulator-min-microvolt values found in the board dts files for the other
> supported boards that use the same RK809 PMIC.
> 
> [...]

Applied, thanks!

[1/1] arm64: dts: rockchip: Fix the DCDC_REG2 minimum voltage on Quartz64 Model B
      commit: d201c92bff90f3d3d0b079fc955378c15c0483cc

Best regards,
-- 
Heiko Stuebner <heiko at sntech.de>