[PATCH 1/7] dt-bindings: can: m_can: Add wakeup-source property

[Conor Dooley]

On Thu, May 23, 2024 at 09:53:41AM +0200, Markus Schneider-Pargmann wrote:
> m_can can be a wakeup source on some devices. Especially on some of the
> am62* SoCs pins, connected to m_can in the mcu, can be used to wakeup
> the SoC.
> 
> This property defines on which devices m_can can be used for wakeup.
> 
> Signed-off-by: Markus Schneider-Pargmann <msp at baylibre.com>
> ---
>  Documentation/devicetree/bindings/net/can/bosch,m_can.yaml | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml
> index f9ffb963d6b1..33f1688ca208 100644
> --- a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml
> +++ b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml
> @@ -118,6 +118,10 @@ properties:
>    phys:
>      maxItems: 1
>  
> +  wakeup-source:
> +    $ref: /schemas/types.yaml#/definitions/flag
> +    description: This device is capable to wakeup the SoC.

It seems to me like patch 1 & 2 should be squashed, with "wakeup-source"
depending on the correct pinctrl setup?
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20240525/c5bbcb0c/attachment.sig>