[EXT] Re: [PATCH v2 5/5] firmware: imx: adds miscdev
Sascha Hauer
s.hauer at pengutronix.de
Fri May 24 05:43:48 PDT 2024
On Fri, May 24, 2024 at 12:03:35PM +0000, Pankaj Gupta wrote:
>
>
> > -----Original Message-----
> > From: Sascha Hauer <s.hauer at pengutronix.de>
> > Sent: Friday, May 24, 2024 1:53 PM
> > To: Pankaj Gupta <pankaj.gupta at nxp.com>
> > Cc: Jonathan Corbet <corbet at lwn.net>; Rob Herring <robh+dt at kernel.org>;
> > Krzysztof Kozlowski <krzysztof.kozlowski+dt at linaro.org>; Conor Dooley
> > <conor+dt at kernel.org>; Shawn Guo <shawnguo at kernel.org>; Pengutronix
> > Kernel Team <kernel at pengutronix.de>; Fabio Estevam
> > <festevam at gmail.com>; Rob Herring <robh at kernel.org>; Krzysztof Kozlowski
> > <krzk+dt at kernel.org>; linux-doc at vger.kernel.org; linux-
> > kernel at vger.kernel.org; devicetree at vger.kernel.org; imx at lists.linux.dev;
> > linux-arm-kernel at lists.infradead.org
> > Subject: [EXT] Re: [PATCH v2 5/5] firmware: imx: adds miscdev
> >
> > Caution: This is an external email. Please take care when clicking links or
> > opening attachments. When in doubt, report the message using the 'Report
> > this email' button
> >
> >
> > On Thu, May 23, 2024 at 04:19:36PM +0530, Pankaj Gupta wrote:
> > > +int imx_ele_miscdev_msg_send(struct se_if_device_ctx *dev_ctx,
> > > + void *tx_msg, int tx_msg_sz) {
> > > + struct se_if_priv *priv = dev_ctx->priv;
> > > + struct se_msg_hdr *header;
> > > + int err;
> > > +
> > > + header = (struct se_msg_hdr *) tx_msg;
> > > +
> > > + /*
> > > + * Check that the size passed as argument matches the size
> > > + * carried in the message.
> > > + */
> > > + err = header->size << 2;
> > > +
> > > + if (err != tx_msg_sz) {
> > > + err = -EINVAL;
> > > + dev_err(priv->dev,
> > > + "%s: User buffer too small\n",
> > > + dev_ctx->miscdev.name);
> > > + goto exit;
> > > + }
> > > + /* Check the message is valid according to tags */
> > > + if (header->tag == priv->cmd_tag) {
> > > + mutex_lock(&priv->se_if_cmd_lock);
> >
> > Grabbing a mutex in a character devices write fop and releasing it in the read
> > fop is really calling for undesired race conditions.
>
> Condition is:
> - Only one command is allowed to be in flight, at a time per interface.
> -- Second command is not allowed, when one command is in flight.
> - Duration of the flight is till the time the response is not received from the FW.
>
> Command lock is grabbed and then released in process context only.
>
> >
> > If sending a command and receiving the response shall be an atomic operation
> > then you should really consider turning this into an ioctl and just not
> > implement read/write on the character device. With this you'll be able to get
> > rid of several oddities in this drivers locking.
> >
>
> It is not an atomic operation. It can be pre-empted.
I didn't mean atomic in the sense of being non preemptable.
> But it cannot be pre-empted to send another command on the same interface.
>
> As only one command is allowed to be executed at one point in time, through an interface.
I meant atomic in the sense that only one command may be in flight: Send
a message and do not allow to send another message until the answer to
the first one is received.
Using an ioctl you can just use imx_ele_msg_send_rcv() which takes a
mutex during the whole send/receive process and have no need for such a
strange locking construct.
> > > + /*
> > > + * We may need to copy the output data to user before
> > > + * delivering the completion message.
> > > + */
> > > + while (!list_empty(&dev_ctx->pending_out)) {
> > > + b_desc = list_first_entry_or_null(&dev_ctx->pending_out,
> > > + struct se_buf_desc,
> > > + link);
> > > + if (!b_desc)
> > > + continue;
> >
> > b_desc will never be NULL because otherwise you wouldn't be in the loop
> > anymore. The usual way to iterate over a list is to use list_for_each_entry() or
> > list_for_each_entry_safe() in case you delete entries in the loop body.
> >
>
> Will remove the NULL check.
> if (!b_desc)
> continue;
Please don't. Use list_for_each_entry_safe() which is the normal way to
iterate over a list.
> > > +static int se_ioctl_get_mu_info(struct se_if_device_ctx *dev_ctx,
> > > + u64 arg) {
> > > + struct se_if_priv *priv = dev_get_drvdata(dev_ctx->dev);
> > > + struct imx_se_node_info *if_node_info;
> > > + struct se_ioctl_get_if_info info;
> > > + int err = 0;
> > > +
> > > + if_node_info = (struct imx_se_node_info *)priv->info;
> >
> > priv->info is of type const void *. You are casting away the the 'const'
> > here. Either it is const, then it should stay const, or not, in which case it
> > shouldn't be declared const. Also why isn't priv->info of type struct
> > imx_se_node_info * in the first place?
>
> This struct definition is local to the file se_ctrl.c.
> Declaration of imx_se_node_info, is fixed by adding const in the whole file.
Add a
struct imx_se_node_info;
to se_ctrl.h and you're done.
>
> > > + err = -EFAULT;
> > > + goto exit;
> > > + } else {
> > > + /* No specific requirement for this buffer. */
> > > + shared_mem = &dev_ctx->non_secure_mem;
> > > + }
> > > +
> > > + /* Check there is enough space in the shared memory. */
> > > + if (shared_mem->size < shared_mem->pos
> > > + || io.length >= shared_mem->size - shared_mem->pos) {
> > > + dev_err(dev_ctx->priv->dev,
> > > + "%s: Not enough space in shared memory\n",
> > > + dev_ctx->miscdev.name);
> > > + err = -ENOMEM;
> > > + goto exit;
> > > + }
> > > +
> > > + /* Allocate space in shared memory. 8 bytes aligned. */
> > > + pos = shared_mem->pos;
> > > + shared_mem->pos += round_up(io.length, 8u);
> >
> > You are checking if there's enough space in the shared memory without taking
> > this round_up into account.
>
> Yes. It is initializing the local variable 'pos', with last store value of shared_mem->pos.
Your check is:
if (shared_mem->size < shared_mem->pos || io.length >= shared_mem->size - shared_mem->pos)
Afterwards you do a:
shared_mem->pos += round_up(io.length, 8u);
This invalidates the check. You have to honor the potential padding in
your check as well.
Sascha
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
More information about the linux-arm-kernel
mailing list