[PATCH v5 03/16] dt-bindings: mfd: mediatek: Add codec property for MT6357 PMIC

Alexandre Mergnat amergnat at baylibre.com
Thu May 23 01:42:32 PDT 2024


Add the audio codec sub-device. This sub-device is used to set the
optional voltage values according to the hardware.
The properties are:
  - Setup of microphone bias voltage.
  - Setup of the speaker pin pull-down.

Also, add the audio power supply property which is dedicated for
the audio codec sub-device.

Signed-off-by: Alexandre Mergnat <amergnat at baylibre.com>
---
 .../devicetree/bindings/mfd/mediatek,mt6357.yaml   | 33 ++++++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/Documentation/devicetree/bindings/mfd/mediatek,mt6357.yaml b/Documentation/devicetree/bindings/mfd/mediatek,mt6357.yaml
index 37423c2e0fdf..d95307393e75 100644
--- a/Documentation/devicetree/bindings/mfd/mediatek,mt6357.yaml
+++ b/Documentation/devicetree/bindings/mfd/mediatek,mt6357.yaml
@@ -37,6 +37,32 @@ properties:
   "#interrupt-cells":
     const: 2
 
+  vaud28-supply:
+    description: 2.8 volt supply phandle for the audio codec
+
+  audio-codec:
+    type: object
+    properties:
+      mediatek,hp-pull-down:
+        description:
+          Earphone driver positive output stage short to
+          the audio reference ground.
+        type: boolean
+
+      mediatek,micbias0-microvolt:
+        description: Selects MIC Bias 0 output voltage.
+        enum: [1700000, 1800000, 1900000, 2000000,
+               2100000, 2500000, 2600000, 2700000]
+        default: 1700000
+
+      mediatek,micbias1-microvolt:
+        description: Selects MIC Bias 1 output voltage.
+        enum: [1700000, 1800000, 1900000, 2000000,
+               2100000, 2500000, 2600000, 2700000]
+        default: 1700000
+
+    unevaluatedProperties: false
+
   regulators:
     type: object
     $ref: /schemas/regulator/mediatek,mt6357-regulator.yaml
@@ -67,6 +93,7 @@ properties:
 required:
   - compatible
   - regulators
+  - vaud28-supply
 
 additionalProperties: false
 
@@ -81,8 +108,14 @@ examples:
             interrupt-parent = <&pio>;
             interrupts = <145 IRQ_TYPE_LEVEL_HIGH>;
             interrupt-controller;
+            vaud28-supply = <&mt6357_vaud28_reg>;
             #interrupt-cells = <2>;
 
+            audio-codec {
+                mediatek,micbias0-microvolt = <1700000>;
+                mediatek,micbias1-microvolt = <1700000>;
+            };
+
             regulators {
                 mt6357_vproc_reg: buck-vproc {
                     regulator-name = "vproc";

-- 
2.25.1




More information about the linux-arm-kernel mailing list