On Tue, 21 May 2024 11:38:02 -0700, Elliot Berman wrote:
> Document board identifiers for devices from Qualcomm Technologies, Inc.
> These platforms are described with two mechanisms: the hardware SoC
> registers and the "CDT" which is in a RO storage.
>
> The hardware SoC registers describe both the SoC (e.g. SM8650, SC7180)
> as well as revision. Add qcom,soc to describe only the SoC itself and
> qcom,soc-version when the devicetree only works with a certain revision.
>
> The CDT describes all other information about the board/platform.
> Besides the platform type (e.g. MTP, ADP, CRD), there are 3 further
> levels of versioning as well as additional fields to describe the PMIC
> and boot storage device attached. The 3 levels of versioning are a
> subtype, major, and minor version of the platform. Support describing
> just the platform type (qcom,platform), the platform type and subtype
> (qcom,platform-type), and all 4 numbers (qcom,platform-version).
>
> Signed-off-by: Elliot Berman <quic_eberman at quicinc.com>
> ---
> .../devicetree/bindings/board/qcom,board-id.yaml | 144 +++++++++++++++++++++
> 1 file changed, 144 insertions(+)
>
My bot found errors running 'make dt_binding_check' on your patch:
yamllint warnings/errors:
./Documentation/devicetree/bindings/board/qcom,board-id.yaml:15:12: [error] string value is redundantly quoted with any quotes (quoted-strings)
./Documentation/devicetree/bindings/board/qcom,board-id.yaml:74:8: [error] empty value in block mapping (empty-values)
./Documentation/devicetree/bindings/board/qcom,board-id.yaml:81:8: [error] empty value in block mapping (empty-values)
./Documentation/devicetree/bindings/board/qcom,board-id.yaml:88:8: [error] empty value in block mapping (empty-values)
./Documentation/devicetree/bindings/board/qcom,board-id.yaml:97:8: [error] empty value in block mapping (empty-values)
./Documentation/devicetree/bindings/board/qcom,board-id.yaml:103:8: [error] empty value in block mapping (empty-values)
dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/board/qcom,board-id.yaml: allOf:2:if: None is not of type 'object', 'boolean'
from schema $id: http://json-schema.org/draft-07/schema#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/board/qcom,board-id.yaml: allOf:3:if: None is not of type 'object', 'boolean'
from schema $id: http://json-schema.org/draft-07/schema#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/board/qcom,board-id.yaml: allOf:4:if: None is not of type 'object', 'boolean'
from schema $id: http://json-schema.org/draft-07/schema#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/board/qcom,board-id.yaml: allOf:5:if: None is not of type 'object', 'boolean'
from schema $id: http://json-schema.org/draft-07/schema#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/board/qcom,board-id.yaml: allOf:6:if: None is not of type 'object', 'boolean'
from schema $id: http://json-schema.org/draft-07/schema#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/board/qcom,board-id.yaml: $id: 'http://devicetree.org/schemas/board/qcom,board-id.yaml' does not match 'http://devicetree.org/schemas/.*\\.yaml#'
from schema $id: http://devicetree.org/meta-schemas/base.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/board/qcom,board-id.yaml: $schema: 'http://devicetree.org/meta-schemas/core.yaml' is not one of ['http://devicetree.org/meta-schemas/core.yaml#', 'http://devicetree.org/meta-schemas/base.yaml#']
from schema $id: http://devicetree.org/meta-schemas/base.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/board/qcom,board-id.yaml: ignoring, error in schema: allOf: 2: if
Documentation/devicetree/bindings/board/qcom,board-id.example.dts:26:56: error: macro "QCOM_BOARD_ID" passed 4 arguments, but takes just 3
26 | qcom,platform-version = <QCOM_BOARD_ID(MTP, 0, 1, 0)>,
| ^
In file included from Documentation/devicetree/bindings/board/qcom,board-id.example.dts:4:
./scripts/dtc/include-prefixes/dt-bindings/arm/qcom,ids.h:279: note: macro "QCOM_BOARD_ID" defined here
279 | #define QCOM_BOARD_ID(a, major, minor) \
|
Documentation/devicetree/bindings/board/qcom,board-id.example.dts:27:56: error: macro "QCOM_BOARD_ID" passed 4 arguments, but takes just 3
27 | <QCOM_BOARD_ID(MTP, 0, 1, 1)>;
| ^
./scripts/dtc/include-prefixes/dt-bindings/arm/qcom,ids.h:279: note: macro "QCOM_BOARD_ID" defined here
279 | #define QCOM_BOARD_ID(a, major, minor) \
|
make[2]: *** [scripts/Makefile.lib:427: Documentation/devicetree/bindings/board/qcom,board-id.example.dtb] Error 1
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [/builds/robherring/dt-review-ci/linux/Makefile:1430: dt_binding_check] Error 2
make: *** [Makefile:240: __sub-make] Error 2
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240521-board-ids-v3-5-e6c71d05f4d2@quicinc.com
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.