[PATCH] thermal/drivers/mediatek/lvts_thermal: Remove filtered mode for mt8188

AngeloGioacchino Del Regno angelogioacchino.delregno at collabora.com
Thu May 16 02:08:38 PDT 2024


Il 15/05/24 17:03, Julien Panis ha scritto:
> Filtered mode is not supported on mt8188 SoC and is the source of bad
> results. Move to immediate mode which provides good temperatures.
> 
> Signed-off-by: Julien Panis <jpanis at baylibre.com>

Please add the relevant Fixes tag, after which:

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>

> ---
> Filtered mode was set by mistake and difficulties with the test setup
> prevented from catching this earlier. Use default mode (immediate mode)
> instead.
> ---
>   drivers/thermal/mediatek/lvts_thermal.c | 6 ------
>   1 file changed, 6 deletions(-)
> 
> diff --git a/drivers/thermal/mediatek/lvts_thermal.c b/drivers/thermal/mediatek/lvts_thermal.c
> index 0bb3a495b56e..82c355c466cf 100644
> --- a/drivers/thermal/mediatek/lvts_thermal.c
> +++ b/drivers/thermal/mediatek/lvts_thermal.c
> @@ -1458,7 +1458,6 @@ static const struct lvts_ctrl_data mt8188_lvts_mcu_data_ctrl[] = {
>   		},
>   		VALID_SENSOR_MAP(1, 1, 1, 1),
>   		.offset = 0x0,
> -		.mode = LVTS_MSR_FILTERED_MODE,
>   	},
>   	{
>   		.lvts_sensor = {
> @@ -1469,7 +1468,6 @@ static const struct lvts_ctrl_data mt8188_lvts_mcu_data_ctrl[] = {
>   		},
>   		VALID_SENSOR_MAP(1, 1, 0, 0),
>   		.offset = 0x100,
> -		.mode = LVTS_MSR_FILTERED_MODE,
>   	}
>   };
>   
> @@ -1483,7 +1481,6 @@ static const struct lvts_ctrl_data mt8188_lvts_ap_data_ctrl[] = {
>   		},
>   		VALID_SENSOR_MAP(0, 1, 0, 0),
>   		.offset = 0x0,
> -		.mode = LVTS_MSR_FILTERED_MODE,
>   	},
>   	{
>   		.lvts_sensor = {
> @@ -1496,7 +1493,6 @@ static const struct lvts_ctrl_data mt8188_lvts_ap_data_ctrl[] = {
>   		},
>   		VALID_SENSOR_MAP(1, 1, 1, 0),
>   		.offset = 0x100,
> -		.mode = LVTS_MSR_FILTERED_MODE,
>   	},
>   	{
>   		.lvts_sensor = {
> @@ -1507,7 +1503,6 @@ static const struct lvts_ctrl_data mt8188_lvts_ap_data_ctrl[] = {
>   		},
>   		VALID_SENSOR_MAP(1, 1, 0, 0),
>   		.offset = 0x200,
> -		.mode = LVTS_MSR_FILTERED_MODE,
>   	},
>   	{
>   		.lvts_sensor = {
> @@ -1518,7 +1513,6 @@ static const struct lvts_ctrl_data mt8188_lvts_ap_data_ctrl[] = {
>   		},
>   		VALID_SENSOR_MAP(1, 1, 0, 0),
>   		.offset = 0x300,
> -		.mode = LVTS_MSR_FILTERED_MODE,
>   	}
>   };
>   
> 
> ---
> base-commit: 82d92a9a1b9ea0ea52aff27cddd05009b4edad49
> change-id: 20240515-mtk-thermal-mt8188-mode-fix-e583d9a31da1
> 
> Best regards,




More information about the linux-arm-kernel mailing list