[PATCH v2 0/3] arm64: dts: amlogic: a1: introduce thermal setup

[Dmitry Rokosov]

Hello Neil,

Excuse me, pls ping.

On Fri, May 03, 2024 at 09:42:22PM +0300, Dmitry Rokosov wrote:
> Hello Neil,
> 
> A1 Thermal Sensor was applied to linux-pm for v6.10-rc1:
> 
> https://lore.kernel.org/all/89a02410-87c8-47c6-aa50-04dad5b4e585@linaro.org/
> 
> Could you please advise if it's enough to proceed with this series? Or
> do I need to do something more?
> 
> On Thu, Mar 28, 2024 at 10:26:34PM +0300, Dmitry Rokosov wrote:
> > This patch series introduces thermal sensor declaration to the Meson A1
> > common dtsi file. It also sets up thermal zones for the AD402 reference
> > board. It depends on the series with A1 thermal support at [1].
> > 
> > Changes v2 since v1 at [2]:
> >     - provide Neil RvB for cooling-cells dts patch
> >     - purge unnecessary 'amlogic,a1-thermal' fallback
> > 
> > Links:
> > [1] - https://lore.kernel.org/all/20240328191322.17551-1-ddrokosov@salutedevices.com/
> > [2] - https://lore.kernel.org/all/20240328134459.18446-1-ddrokosov@salutedevices.com/
> > 
> > Signed-off-by: Dmitry Rokosov <ddrokosov at salutedevices.com>
> > 
> > Dmitry Rokosov (3):
> >   arm64: dts: amlogic: a1: add cooling-cells for DVFS feature
> >   arm64: dts: amlogic: a1: introduce cpu temperature sensor
> >   arm64: dts: amlogic: ad402: setup thermal-zones
> > 
> >  .../arm64/boot/dts/amlogic/meson-a1-ad402.dts | 45 +++++++++++++++++++
> >  arch/arm64/boot/dts/amlogic/meson-a1.dtsi     | 13 ++++++
> >  2 files changed, 58 insertions(+)
> 
> -- 
> Thank you,
> Dmitry

-- 
Thank you,
Dmitry