[PATCH v1] PCI: dwc: Fix resume failure if no EP is connected at some platforms.

Frank Li Frank.li at nxp.com
Tue May 14 09:19:03 PDT 2024


On Tue, May 14, 2024 at 01:09:18PM +0800, Richard Zhu wrote:
> The dw_pcie_suspend_noirq() function currently returns success directly
> if no endpoint (EP) device is connected. However, on some platforms, power
> loss occurs during suspend, causing dw_resume() to do nothing in this case.
> This results in a system halt because the DWC controller is not initialized
> after power-on during resume.
> 
> Change call to deinit() in suspend and init() at resume regardless of
> whether there are EP device connections or not. It is not harmful to
> perform deinit() and init() again for the no power-off case, and it keeps
> the code simple and consistent in logic.
> 
> Fixes: 4774faf854f5 ("PCI: dwc: Implement generic suspend/resume functionality")
> Signed-off-by: Richard Zhu <hongxing.zhu at nxp.com>

Reviewed-by: Frank Li <Frank.Li at nxp.com>

> ---
> https://git.kernel.org/pub/scm/linux/kernel/git/pci/pci.git/log/?h=controller/dwc
> This patch depends on the branch listed above, because it's not in pci-next.
> But suppose it will be in there soon.
> 
>  .../pci/controller/dwc/pcie-designware-host.c | 30 +++++++++----------
>  1 file changed, 15 insertions(+), 15 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
> index a0822d5371bc5..cb8c3c2bcc790 100644
> --- a/drivers/pci/controller/dwc/pcie-designware-host.c
> +++ b/drivers/pci/controller/dwc/pcie-designware-host.c
> @@ -933,23 +933,23 @@ int dw_pcie_suspend_noirq(struct dw_pcie *pci)
>  	if (dw_pcie_readw_dbi(pci, offset + PCI_EXP_LNKCTL) & PCI_EXP_LNKCTL_ASPM_L1)
>  		return 0;
>  
> -	if (dw_pcie_get_ltssm(pci) <= DW_PCIE_LTSSM_DETECT_ACT)
> -		return 0;
> -
> -	if (pci->pp.ops->pme_turn_off)
> -		pci->pp.ops->pme_turn_off(&pci->pp);
> -	else
> -		ret = dw_pcie_pme_turn_off(pci);
> +	if (dw_pcie_get_ltssm(pci) > DW_PCIE_LTSSM_DETECT_ACT) {
> +		/* Only send out PME_TURN_OFF when PCIE link is up */
> +		if (pci->pp.ops->pme_turn_off)
> +			pci->pp.ops->pme_turn_off(&pci->pp);
> +		else
> +			ret = dw_pcie_pme_turn_off(pci);
>  
> -	if (ret)
> -		return ret;
> +		if (ret)
> +			return ret;
>  
> -	ret = read_poll_timeout(dw_pcie_get_ltssm, val, val == DW_PCIE_LTSSM_L2_IDLE,
> -				PCIE_PME_TO_L2_TIMEOUT_US/10,
> -				PCIE_PME_TO_L2_TIMEOUT_US, false, pci);
> -	if (ret) {
> -		dev_err(pci->dev, "Timeout waiting for L2 entry! LTSSM: 0x%x\n", val);
> -		return ret;
> +		ret = read_poll_timeout(dw_pcie_get_ltssm, val, val == DW_PCIE_LTSSM_L2_IDLE,
> +					PCIE_PME_TO_L2_TIMEOUT_US/10,
> +					PCIE_PME_TO_L2_TIMEOUT_US, false, pci);
> +		if (ret) {
> +			dev_err(pci->dev, "Timeout waiting for L2 entry! LTSSM: 0x%x\n", val);
> +			return ret;
> +		}
>  	}
>  
>  	if (pci->pp.ops->deinit)
> -- 
> 2.37.1
> 



More information about the linux-arm-kernel mailing list