[PATCH v5 1/2] dt-bindings: phy: Add i.MX8Q HSIO SerDes PHY binding

[Conor Dooley]

On Mon, May 13, 2024 at 09:22:03AM +0800, Richard Zhu wrote:

> +  fsl,hsio-cfg:
> +    description:
> +      Specifies the use case of the HSIO module in the hardware design.
> +      Because the HSIO module can be configure into three different use
> +      cases.
> +      Refer to macro HSIO_CFG* of include/dt-bindings/phy/phy-imx8-pcie.h.
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    maximum: 3

> +/*
> + * Regarding the design of i.MX8QM HSIO subsystem, HSIO module can be
> + * confiured as following three use cases.
> + *
> + * Define different configurations refer to the use cases, since it is
> + * mandatory required in the initialization.
> + *
> + * On i.MX8QXP, HSIO module only has PCIEB and one lane PHY.
> + * Define "IMX8Q_HSIO_CFG_PCIEB" for i.MX8QXP platforms.
> + *
> + * +----------------------------------------------------+----------+
> + * |                               | i.MX8QM            | i.MX8QXP |
> + * |-------------------------------|--------------------|----------|
> + * |                               | Lane0| Lane1| Lane2| Lane0    |
> + * |-------------------------------|------|------|------|----------|
> + * | IMX8Q_HSIO_CFG_PCIEAX2SATA    | PCIEA| PCIEA| SATA |          |
> + * |-------------------------------|------|------|------|----------|
> + * | IMX8Q_HSIO_CFG_PCIEAX2PCIEB   | PCIEA| PCIEA| PCIEB|          |
> + * |-------------------------------|------|------|------|----------|
> + * | IMX8Q_HSIO_CFG_PCIEAPCIEBSATA | PCIEA| PCIEB| SATA |          |
> + * |-------------------------------|------|------|------|----------|
> + * | IMX8Q_HSIO_CFG_PCIEB          | -    | -    | -    | PCIEB    |
> + * +----------------------------------------------------+----------+
> + */
> +#define IMX8Q_HSIO_CFG_PCIEAX2SATA	0x1
> +#define IMX8Q_HSIO_CFG_PCIEAX2PCIEB	0x2
> +#define IMX8Q_HSIO_CFG_PCIEAPCIEBSATA	(IMX8Q_HSIO_CFG_PCIEAX2SATA | IMX8Q_HSIO_CFG_PCIEAX2PCIEB)
> +#define IMX8Q_HSIO_CFG_PCIEB		IMX8Q_HSIO_CFG_PCIEAX2PCIEB

Rob may disagree with me, but I think this should be an enum of possible
strings with the table here moved into the property description. The QXP
only option should then be constrained per compatible.

> +
> +  fsl,refclk-pad-mode:
> +    description:
> +      Specifies the mode of the refclk pad used. INPUT(PHY refclock is
> +      provided externally via the refclk pad) or OUTPUT(PHY refclock is
> +      derived from SoC internal source and provided on the refclk pad).

> +      This property not exsit means unused(PHY refclock is derived from

Please run a spell checker on your patches.

> +      SoC internal source).

> +    $ref: /schemas/types.yaml#/definitions/string
> +    enum: [ input, output ]

enum: [input, output, unused]
default: unused

Cheers,
Conor.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20240513/fe57b5bb/attachment.sig>