[PATCH v2 12/17] clk: imx: imx8mm: Change the 'nand_usdhc_bus' clock to non-critical one

[Peng Fan (OSS)]

From: Jacky Bai <ping.bai at nxp.com>

The 'nand_usdhc_bus' clock is only need to be enabled when usdhc
or nand module is active, so change it to non-critical clock type.

Signed-off-by: Jacky Bai <ping.bai at nxp.com>
Signed-off-by: Peng Fan <peng.fan at nxp.com>
---
 drivers/clk/imx/clk-imx8mm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/imx/clk-imx8mm.c b/drivers/clk/imx/clk-imx8mm.c
index 075f643e3f35..342049b847b9 100644
--- a/drivers/clk/imx/clk-imx8mm.c
+++ b/drivers/clk/imx/clk-imx8mm.c
@@ -432,7 +432,7 @@ static int imx8mm_clocks_probe(struct platform_device *pdev)
 	/* BUS */
 	hws[IMX8MM_CLK_MAIN_AXI] = imx8m_clk_hw_composite_bus_critical("main_axi",  imx8mm_main_axi_sels, base + 0x8800);
 	hws[IMX8MM_CLK_ENET_AXI] = imx8m_clk_hw_composite_bus("enet_axi", imx8mm_enet_axi_sels, base + 0x8880);
-	hws[IMX8MM_CLK_NAND_USDHC_BUS] = imx8m_clk_hw_composite_bus_critical("nand_usdhc_bus", imx8mm_nand_usdhc_sels, base + 0x8900);
+	hws[IMX8MM_CLK_NAND_USDHC_BUS] = imx8m_clk_hw_composite("nand_usdhc_bus", imx8mm_nand_usdhc_sels, base + 0x8900);
 	hws[IMX8MM_CLK_VPU_BUS] = imx8m_clk_hw_composite_bus("vpu_bus", imx8mm_vpu_bus_sels, base + 0x8980);
 	hws[IMX8MM_CLK_DISP_AXI] = imx8m_clk_hw_composite_bus("disp_axi", imx8mm_disp_axi_sels, base + 0x8a00);
 	hws[IMX8MM_CLK_DISP_APB] = imx8m_clk_hw_composite_bus("disp_apb", imx8mm_disp_apb_sels, base + 0x8a80);

-- 
2.37.1