[PATCH net v2 2/2] net: ethernet: mediatek: use ADMAv1 instead of ADMAv2.0 on MT7981 and MT7986

[Przemek Kitszel]

On 5/7/24 14:25, Daniel Golle wrote:
> ADMAv2.0 is plagued by RX hangs which can't easily detected and happen upon

nit: missing "be" after "can't",
but no need to respin just for that

> receival of a corrupted Ethernet frame.
> 
> Use ADMAv1 instead which is also still present and usable, and doesn't
> suffer from that problem.
> 
> Fixes: 197c9e9b17b1 ("net: ethernet: mtk_eth_soc: introduce support for mt7986 chipset")
> Co-developed-by: Lorenzo Bianconi <lorenzo at kernel.org>
> Signed-off-by: Lorenzo Bianconi <lorenzo at kernel.org>
> Signed-off-by: Daniel Golle <daniel at makrotopia.org>
> ---
> v2: improve commit message
>   drivers/net/ethernet/mediatek/mtk_eth_soc.c | 46 ++++++++++-----------
>   1 file changed, 23 insertions(+), 23 deletions(-)
> 
> diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
> index 3eefb735ce19..d7d73295f0dc 100644
> --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
> +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
> @@ -110,16 +110,16 @@ static const struct mtk_reg_map mt7986_reg_map = {

MT7981 uses the same regmap, so is covered too, fine

>   	.tx_irq_mask		= 0x461c,
>   	.tx_irq_status		= 0x4618,
>   	.pdma = {
> -		.rx_ptr		= 0x6100,
> -		.rx_cnt_cfg	= 0x6104,
> -		.pcrx_ptr	= 0x6108,
> -		.glo_cfg	= 0x6204,
> -		.rst_idx	= 0x6208,
> -		.delay_irq	= 0x620c,
> -		.irq_status	= 0x6220,
> -		.irq_mask	= 0x6228,
> -		.adma_rx_dbg0	= 0x6238,
> -		.int_grp	= 0x6250,
> +		.rx_ptr		= 0x4100,
> +		.rx_cnt_cfg	= 0x4104,
> +		.pcrx_ptr	= 0x4108,
> +		.glo_cfg	= 0x4204,
> +		.rst_idx	= 0x4208,
> +		.delay_irq	= 0x420c,
> +		.irq_status	= 0x4220,
> +		.irq_mask	= 0x4228,
> +		.adma_rx_dbg0	= 0x4238,
> +		.int_grp	= 0x4250,
>   	},
>   	.qdma = {
>   		.qtx_cfg	= 0x4400,

// ...

Reviewed-by: Przemek Kitszel <przemyslaw.kitszel at intel.com>