[PATCH 10/14] drm/bridge: analogix_dp: move macro reset after link bandwidth setting

Robert Foss rfoss at kernel.org
Tue May 7 06:07:51 PDT 2024


On Fri, May 3, 2024 at 5:13 PM Lucas Stach <l.stach at pengutronix.de> wrote:
>
> Setting the link bandwidth may change the PLL parameters, which will cause
> the PLL to go out of lock, so make sure to apply the MACRO_RST, which
> according to the comment is required to be pulsed after the PLL is locked.
>
> Signed-off-by: Lucas Stach <l.stach at pengutronix.de>
> ---
>  .../gpu/drm/bridge/analogix/analogix_dp_core.c | 18 ++++++++++--------
>  1 file changed, 10 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
> index b4a47311cfe8..736b2ed745e1 100644
> --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
> +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
> @@ -243,6 +243,11 @@ static int analogix_dp_link_start(struct analogix_dp_device *dp)
>
>         /* Set link rate and count as you want to establish*/
>         analogix_dp_set_link_bandwidth(dp, dp->link_train.link_rate);
> +       /*
> +        * MACRO_RST must be applied after the PLL_LOCK to avoid
> +        * the DP inter pair skew issue for at least 10 us
> +        */
> +       analogix_dp_reset_macro(dp);
>         analogix_dp_set_lane_count(dp, dp->link_train.lane_count);
>
>         /* Setup RX configuration */
> @@ -565,12 +570,6 @@ static int analogix_dp_full_link_train(struct analogix_dp_device *dp,
>         int retval = 0;
>         bool training_finished = false;
>
> -       /*
> -        * MACRO_RST must be applied after the PLL_LOCK to avoid
> -        * the DP inter pair skew issue for at least 10 us
> -        */
> -       analogix_dp_reset_macro(dp);
> -
>         /* Initialize by reading RX's DPCD */
>         analogix_dp_get_max_rx_bandwidth(dp, &dp->link_train.link_rate);
>         analogix_dp_get_max_rx_lane_count(dp, &dp->link_train.lane_count);
> @@ -637,9 +636,12 @@ static int analogix_dp_fast_link_train(struct analogix_dp_device *dp)
>         u8 link_align, link_status[2];
>         enum pll_status status;
>
> -       analogix_dp_reset_macro(dp);
> -
>         analogix_dp_set_link_bandwidth(dp, dp->link_train.link_rate);
> +       /*
> +        * MACRO_RST must be applied after the PLL_LOCK to avoid
> +        * the DP inter pair skew issue for at least 10 us
> +        */
> +       analogix_dp_reset_macro(dp);
>         analogix_dp_set_lane_count(dp, dp->link_train.lane_count);
>         analogix_dp_set_lane_link_training(dp);
>
> --
> 2.39.2
>

This patch does not apply on drm-misc/drm-misc-next as far as I can tell.



More information about the linux-arm-kernel mailing list