[PATCH v4 4/6] arm64: dts: rockchip: enable automatic fan control on Rock 5B

[Alexey Charkov]

This links the PWM fan on Radxa Rock 5B as an active cooling device
managed automatically by the thermal subsystem, with a target SoC
temperature of 65C and a minimum-spin interval from 55C to 65C to
ensure airflow when the system gets warm

Helped-by: Dragan Simic <dsimic at manjaro.org>
Reviewed-by: Dragan Simic <dsimic at manjaro.org>
Signed-off-by: Alexey Charkov <alchark at gmail.com>
---
 arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts | 30 ++++++++++++++++++++++++-
 1 file changed, 29 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
index 21e96c212dd8..b70313643af8 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
@@ -52,7 +52,7 @@ led_rgb_b {
 
 	fan: pwm-fan {
 		compatible = "pwm-fan";
-		cooling-levels = <0 95 145 195 255>;
+		cooling-levels = <0 120 150 180 210 240 255>;
 		fan-supply = <&vcc5v0_sys>;
 		pwms = <&pwm1 0 50000 0>;
 		#cooling-cells = <2>;
@@ -279,6 +279,34 @@ i2s0_8ch_p0_0: endpoint {
 	};
 };
 
+&package_thermal {
+	polling-delay = <1000>;
+
+	trips {
+		package_fan0: package-fan0 {
+			temperature = <55000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+		package_fan1: package-fan1 {
+			temperature = <65000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map1 {
+			trip = <&package_fan0>;
+			cooling-device = <&fan THERMAL_NO_LIMIT 1>;
+		};
+		map2 {
+			trip = <&package_fan1>;
+			cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
 &pcie2x1l0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie2_0_rst>;

-- 
2.45.0