[PATCH 05/18] clk: imx: pll14xx: Add constraint for fvco frequency

Peng Fan (OSS) peng.fan at oss.nxp.com
Fri May 3 17:48:58 PDT 2024


From: Shengjiu Wang <shengjiu.wang at nxp.com>

The fvco frequency range is between 1600MHz and 3200MHz, without
this constraint the fvco may out of range, the real output
frequency is no accurate.

Aslo correct the name for fvco and fout clock.

Fixes: b09c68dc57c9 ("clk: imx: pll14xx: Support dynamic rates")
Signed-off-by: Shengjiu Wang <shengjiu.wang at nxp.com>
Acked-by: Jacky Bai <ping.bai at nxp.com>
Tested-by: Chancel Liu <chancel.liu at nxp.com>
Signed-off-by: Peng Fan <peng.fan at nxp.com>
---
 drivers/clk/imx/clk-pll14xx.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/imx/clk-pll14xx.c b/drivers/clk/imx/clk-pll14xx.c
index d63564dbb12c..55812bfb9ec2 100644
--- a/drivers/clk/imx/clk-pll14xx.c
+++ b/drivers/clk/imx/clk-pll14xx.c
@@ -131,7 +131,7 @@ static void imx_pll14xx_calc_settings(struct clk_pll14xx *pll, unsigned long rat
 {
 	u32 pll_div_ctl0, pll_div_ctl1;
 	int mdiv, pdiv, sdiv, kdiv;
-	long fout, rate_min, rate_max, dist, best = LONG_MAX;
+	long fvco, fout, rate_min, rate_max, dist, best = LONG_MAX;
 	const struct imx_pll14xx_rate_table *tt;
 
 	/*
@@ -144,6 +144,8 @@ static void imx_pll14xx_calc_settings(struct clk_pll14xx *pll, unsigned long rat
 	 *
 	 * fvco = (m * 65536 + k) * prate / (p * 65536)
 	 * fout = (m * 65536 + k) * prate / (p * 65536) / (1 << sdiv)
+	 *
+	 * e) 1600MHz <= fvco <= 3200MHz
 	 */
 
 	/* First try if we can get the desired rate from one of the static entries */
@@ -193,6 +195,10 @@ static void imx_pll14xx_calc_settings(struct clk_pll14xx *pll, unsigned long rat
 			kdiv = pll1443x_calc_kdiv(mdiv, pdiv, sdiv, rate, prate);
 			fout = pll14xx_calc_rate(pll, mdiv, pdiv, sdiv, kdiv, prate);
 
+			fvco = fout << sdiv;
+
+			if (fvco < 1600000000 || fvco > 3200000000)
+				continue;
 			/* best match */
 			dist = abs((long)rate - (long)fout);
 			if (dist < best) {

-- 
2.37.1




More information about the linux-arm-kernel mailing list