[PATCH v4 2/3] arm64: dts: freescale: add i.MX95 basic dtsi
Frank Li
Frank.li at nxp.com
Thu May 2 20:19:23 PDT 2024
On Fri, May 03, 2024 at 09:37:12AM +0800, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan at nxp.com>
>
> i.MX95 features 6 A55 Cores, ARM Mali GPU, ISP, ML acceleration NPU,
> and Edgelock secure enclave security. This patch is to add a minimal
> dtsi, with cpu cores, coresight, scmi, gic, uart, mu, sdhc, lpi2c added.
>
> Signed-off-by: Peng Fan <peng.fan at nxp.com>
> ---
> arch/arm64/boot/dts/freescale/imx95-clock.h | 187 +++++
> arch/arm64/boot/dts/freescale/imx95-power.h | 55 ++
> arch/arm64/boot/dts/freescale/imx95.dtsi | 1049 +++++++++++++++++++++++++++
> 3 files changed, 1291 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx95-clock.h b/arch/arm64/boot/dts/freescale/imx95-clock.h
> new file mode 100644
> index 000000000000..5badaace3148
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx95-clock.h
> @@ -0,0 +1,187 @@
> +/* SPDX-License-Identifier: GPL-2.0-only OR MIT */
> +/*
> + * Copyright 2024 NXP
> + */
> +
> +#ifndef __CLOCK_IMX95_H
> +#define __CLOCK_IMX95_H
> +
> +/* The index should match i.MX95 SCMI Firmware */
> +#define IMX95_CLK_32K 1
> +#define IMX95_CLK_24M 2
> +#define IMX95_CLK_FRO 3
> +#define IMX95_CLK_SYSPLL1_VCO 4
> +#define IMX95_CLK_SYSPLL1_PFD0_UNGATED 5
> +#define IMX95_CLK_SYSPLL1_PFD0 6
> +#define IMX95_CLK_SYSPLL1_PFD0_DIV2 7
> +#define IMX95_CLK_SYSPLL1_PFD1_UNGATED 8
> +#define IMX95_CLK_SYSPLL1_PFD1 9
> +#define IMX95_CLK_SYSPLL1_PFD1_DIV2 10
> +#define IMX95_CLK_SYSPLL1_PFD2_UNGATED 11
> +#define IMX95_CLK_SYSPLL1_PFD2 12
> +#define IMX95_CLK_SYSPLL1_PFD2_DIV2 13
> +#define IMX95_CLK_AUDIOPLL1_VCO 14
> +#define IMX95_CLK_AUDIOPLL1 15
> +#define IMX95_CLK_AUDIOPLL2_VCO 16
> +#define IMX95_CLK_AUDIOPLL2 17
> +#define IMX95_CLK_VIDEOPLL1_VCO 18
> +#define IMX95_CLK_VIDEOPLL1 19
> +#define IMX95_CLK_RESERVED20 20
> +#define IMX95_CLK_RESERVED21 21
> +#define IMX95_CLK_RESERVED22 22
> +#define IMX95_CLK_RESERVED23 23
> +#define IMX95_CLK_ARMPLL_VCO 24
> +#define IMX95_CLK_ARMPLL_PFD0_UNGATED 25
> +#define IMX95_CLK_ARMPLL_PFD0 26
> +#define IMX95_CLK_ARMPLL_PFD1_UNGATED 27
> +#define IMX95_CLK_ARMPLL_PFD1 28
> +#define IMX95_CLK_ARMPLL_PFD2_UNGATED 29
> +#define IMX95_CLK_ARMPLL_PFD2 30
> +#define IMX95_CLK_ARMPLL_PFD3_UNGATED 31
> +#define IMX95_CLK_ARMPLL_PFD3 32
> +#define IMX95_CLK_DRAMPLL_VCO 33
> +#define IMX95_CLK_DRAMPLL 34
> +#define IMX95_CLK_HSIOPLL_VCO 35
> +#define IMX95_CLK_HSIOPLL 36
> +#define IMX95_CLK_LDBPLL_VCO 37
> +#define IMX95_CLK_LDBPLL 38
> +#define IMX95_CLK_EXT1 39
> +#define IMX95_CLK_EXT2 40
> +
> +#define IMX95_CCM_NUM_CLK_SRC 41
> +
> +#define IMX95_CLK_ADC (IMX95_CCM_NUM_CLK_SRC + 0)
> +#define IMX95_CLK_TMU (IMX95_CCM_NUM_CLK_SRC + 1)
> +#define IMX95_CLK_BUSAON (IMX95_CCM_NUM_CLK_SRC + 2)
> +#define IMX95_CLK_CAN1 (IMX95_CCM_NUM_CLK_SRC + 3)
> +#define IMX95_CLK_I3C1 (IMX95_CCM_NUM_CLK_SRC + 4)
> +#define IMX95_CLK_I3C1SLOW (IMX95_CCM_NUM_CLK_SRC + 5)
> +#define IMX95_CLK_LPI2C1 (IMX95_CCM_NUM_CLK_SRC + 6)
> +#define IMX95_CLK_LPI2C2 (IMX95_CCM_NUM_CLK_SRC + 7)
> +#define IMX95_CLK_LPSPI1 (IMX95_CCM_NUM_CLK_SRC + 8)
> +#define IMX95_CLK_LPSPI2 (IMX95_CCM_NUM_CLK_SRC + 9)
> +#define IMX95_CLK_LPTMR1 (IMX95_CCM_NUM_CLK_SRC + 10)
> +#define IMX95_CLK_LPUART1 (IMX95_CCM_NUM_CLK_SRC + 11)
> +#define IMX95_CLK_LPUART2 (IMX95_CCM_NUM_CLK_SRC + 12)
> +#define IMX95_CLK_M33 (IMX95_CCM_NUM_CLK_SRC + 13)
> +#define IMX95_CLK_M33SYSTICK (IMX95_CCM_NUM_CLK_SRC + 14)
> +#define IMX95_CLK_MQS1 (IMX95_CCM_NUM_CLK_SRC + 15)
> +#define IMX95_CLK_PDM (IMX95_CCM_NUM_CLK_SRC + 16)
> +#define IMX95_CLK_SAI1 (IMX95_CCM_NUM_CLK_SRC + 17)
> +#define IMX95_CLK_SENTINEL (IMX95_CCM_NUM_CLK_SRC + 18)
> +#define IMX95_CLK_TPM2 (IMX95_CCM_NUM_CLK_SRC + 19)
> +#define IMX95_CLK_TSTMR1 (IMX95_CCM_NUM_CLK_SRC + 20)
> +#define IMX95_CLK_CAMAPB (IMX95_CCM_NUM_CLK_SRC + 21)
> +#define IMX95_CLK_CAMAXI (IMX95_CCM_NUM_CLK_SRC + 22)
> +#define IMX95_CLK_CAMCM0 (IMX95_CCM_NUM_CLK_SRC + 23)
> +#define IMX95_CLK_CAMISI (IMX95_CCM_NUM_CLK_SRC + 24)
> +#define IMX95_CLK_MIPIPHYCFG (IMX95_CCM_NUM_CLK_SRC + 25)
> +#define IMX95_CLK_MIPIPHYPLLBYPASS (IMX95_CCM_NUM_CLK_SRC + 26)
> +#define IMX95_CLK_MIPIPHYPLLREF (IMX95_CCM_NUM_CLK_SRC + 27)
> +#define IMX95_CLK_MIPITESTBYTE (IMX95_CCM_NUM_CLK_SRC + 28)
> +#define IMX95_CLK_A55 (IMX95_CCM_NUM_CLK_SRC + 29)
> +#define IMX95_CLK_A55MTRBUS (IMX95_CCM_NUM_CLK_SRC + 30)
> +#define IMX95_CLK_A55PERIPH (IMX95_CCM_NUM_CLK_SRC + 31)
> +#define IMX95_CLK_DRAMALT (IMX95_CCM_NUM_CLK_SRC + 32)
> +#define IMX95_CLK_DRAMAPB (IMX95_CCM_NUM_CLK_SRC + 33)
> +#define IMX95_CLK_DISPAPB (IMX95_CCM_NUM_CLK_SRC + 34)
> +#define IMX95_CLK_DISPAXI (IMX95_CCM_NUM_CLK_SRC + 35)
> +#define IMX95_CLK_DISPDP (IMX95_CCM_NUM_CLK_SRC + 36)
> +#define IMX95_CLK_DISPOCRAM (IMX95_CCM_NUM_CLK_SRC + 37)
> +#define IMX95_CLK_DISPUSB31 (IMX95_CCM_NUM_CLK_SRC + 38)
> +#define IMX95_CLK_DISP1PIX (IMX95_CCM_NUM_CLK_SRC + 39)
> +#define IMX95_CLK_DISP2PIX (IMX95_CCM_NUM_CLK_SRC + 40)
> +#define IMX95_CLK_DISP3PIX (IMX95_CCM_NUM_CLK_SRC + 41)
> +#define IMX95_CLK_GPUAPB (IMX95_CCM_NUM_CLK_SRC + 42)
> +#define IMX95_CLK_GPU (IMX95_CCM_NUM_CLK_SRC + 43)
> +#define IMX95_CLK_HSIOACSCAN480M (IMX95_CCM_NUM_CLK_SRC + 44)
> +#define IMX95_CLK_HSIOACSCAN80M (IMX95_CCM_NUM_CLK_SRC + 45)
> +#define IMX95_CLK_HSIO (IMX95_CCM_NUM_CLK_SRC + 46)
> +#define IMX95_CLK_HSIOPCIEAUX (IMX95_CCM_NUM_CLK_SRC + 47)
> +#define IMX95_CLK_HSIOPCIETEST160M (IMX95_CCM_NUM_CLK_SRC + 48)
> +#define IMX95_CLK_HSIOPCIETEST400M (IMX95_CCM_NUM_CLK_SRC + 49)
> +#define IMX95_CLK_HSIOPCIETEST500M (IMX95_CCM_NUM_CLK_SRC + 50)
> +#define IMX95_CLK_HSIOUSBTEST50M (IMX95_CCM_NUM_CLK_SRC + 51)
> +#define IMX95_CLK_HSIOUSBTEST60M (IMX95_CCM_NUM_CLK_SRC + 52)
> +#define IMX95_CLK_BUSM7 (IMX95_CCM_NUM_CLK_SRC + 53)
> +#define IMX95_CLK_M7 (IMX95_CCM_NUM_CLK_SRC + 54)
> +#define IMX95_CLK_M7SYSTICK (IMX95_CCM_NUM_CLK_SRC + 55)
> +#define IMX95_CLK_BUSNETCMIX (IMX95_CCM_NUM_CLK_SRC + 56)
> +#define IMX95_CLK_ENET (IMX95_CCM_NUM_CLK_SRC + 57)
> +#define IMX95_CLK_ENETPHYTEST200M (IMX95_CCM_NUM_CLK_SRC + 58)
> +#define IMX95_CLK_ENETPHYTEST500M (IMX95_CCM_NUM_CLK_SRC + 59)
> +#define IMX95_CLK_ENETPHYTEST667M (IMX95_CCM_NUM_CLK_SRC + 60)
> +#define IMX95_CLK_ENETREF (IMX95_CCM_NUM_CLK_SRC + 61)
> +#define IMX95_CLK_ENETTIMER1 (IMX95_CCM_NUM_CLK_SRC + 62)
> +#define IMX95_CLK_MQS2 (IMX95_CCM_NUM_CLK_SRC + 63)
> +#define IMX95_CLK_SAI2 (IMX95_CCM_NUM_CLK_SRC + 64)
> +#define IMX95_CLK_NOCAPB (IMX95_CCM_NUM_CLK_SRC + 65)
> +#define IMX95_CLK_NOC (IMX95_CCM_NUM_CLK_SRC + 66)
> +#define IMX95_CLK_NPUAPB (IMX95_CCM_NUM_CLK_SRC + 67)
> +#define IMX95_CLK_NPU (IMX95_CCM_NUM_CLK_SRC + 68)
> +#define IMX95_CLK_CCMCKO1 (IMX95_CCM_NUM_CLK_SRC + 69)
> +#define IMX95_CLK_CCMCKO2 (IMX95_CCM_NUM_CLK_SRC + 70)
> +#define IMX95_CLK_CCMCKO3 (IMX95_CCM_NUM_CLK_SRC + 71)
> +#define IMX95_CLK_CCMCKO4 (IMX95_CCM_NUM_CLK_SRC + 72)
> +#define IMX95_CLK_VPUAPB (IMX95_CCM_NUM_CLK_SRC + 73)
> +#define IMX95_CLK_VPU (IMX95_CCM_NUM_CLK_SRC + 74)
> +#define IMX95_CLK_VPUDSP (IMX95_CCM_NUM_CLK_SRC + 75)
> +#define IMX95_CLK_VPUJPEG (IMX95_CCM_NUM_CLK_SRC + 76)
> +#define IMX95_CLK_AUDIOXCVR (IMX95_CCM_NUM_CLK_SRC + 77)
> +#define IMX95_CLK_BUSWAKEUP (IMX95_CCM_NUM_CLK_SRC + 78)
> +#define IMX95_CLK_CAN2 (IMX95_CCM_NUM_CLK_SRC + 79)
> +#define IMX95_CLK_CAN3 (IMX95_CCM_NUM_CLK_SRC + 80)
> +#define IMX95_CLK_CAN4 (IMX95_CCM_NUM_CLK_SRC + 81)
> +#define IMX95_CLK_CAN5 (IMX95_CCM_NUM_CLK_SRC + 82)
> +#define IMX95_CLK_FLEXIO1 (IMX95_CCM_NUM_CLK_SRC + 83)
> +#define IMX95_CLK_FLEXIO2 (IMX95_CCM_NUM_CLK_SRC + 84)
> +#define IMX95_CLK_FLEXSPI1 (IMX95_CCM_NUM_CLK_SRC + 85)
> +#define IMX95_CLK_I3C2 (IMX95_CCM_NUM_CLK_SRC + 86)
> +#define IMX95_CLK_I3C2SLOW (IMX95_CCM_NUM_CLK_SRC + 87)
> +#define IMX95_CLK_LPI2C3 (IMX95_CCM_NUM_CLK_SRC + 88)
> +#define IMX95_CLK_LPI2C4 (IMX95_CCM_NUM_CLK_SRC + 89)
> +#define IMX95_CLK_LPI2C5 (IMX95_CCM_NUM_CLK_SRC + 90)
> +#define IMX95_CLK_LPI2C6 (IMX95_CCM_NUM_CLK_SRC + 91)
> +#define IMX95_CLK_LPI2C7 (IMX95_CCM_NUM_CLK_SRC + 92)
> +#define IMX95_CLK_LPI2C8 (IMX95_CCM_NUM_CLK_SRC + 93)
> +#define IMX95_CLK_LPSPI3 (IMX95_CCM_NUM_CLK_SRC + 94)
> +#define IMX95_CLK_LPSPI4 (IMX95_CCM_NUM_CLK_SRC + 95)
> +#define IMX95_CLK_LPSPI5 (IMX95_CCM_NUM_CLK_SRC + 96)
> +#define IMX95_CLK_LPSPI6 (IMX95_CCM_NUM_CLK_SRC + 97)
> +#define IMX95_CLK_LPSPI7 (IMX95_CCM_NUM_CLK_SRC + 98)
> +#define IMX95_CLK_LPSPI8 (IMX95_CCM_NUM_CLK_SRC + 99)
> +#define IMX95_CLK_LPTMR2 (IMX95_CCM_NUM_CLK_SRC + 100)
> +#define IMX95_CLK_LPUART3 (IMX95_CCM_NUM_CLK_SRC + 101)
> +#define IMX95_CLK_LPUART4 (IMX95_CCM_NUM_CLK_SRC + 102)
> +#define IMX95_CLK_LPUART5 (IMX95_CCM_NUM_CLK_SRC + 103)
> +#define IMX95_CLK_LPUART6 (IMX95_CCM_NUM_CLK_SRC + 104)
> +#define IMX95_CLK_LPUART7 (IMX95_CCM_NUM_CLK_SRC + 105)
> +#define IMX95_CLK_LPUART8 (IMX95_CCM_NUM_CLK_SRC + 106)
> +#define IMX95_CLK_SAI3 (IMX95_CCM_NUM_CLK_SRC + 107)
> +#define IMX95_CLK_SAI4 (IMX95_CCM_NUM_CLK_SRC + 108)
> +#define IMX95_CLK_SAI5 (IMX95_CCM_NUM_CLK_SRC + 109)
> +#define IMX95_CLK_SPDIF (IMX95_CCM_NUM_CLK_SRC + 110)
> +#define IMX95_CLK_SWOTRACE (IMX95_CCM_NUM_CLK_SRC + 111)
> +#define IMX95_CLK_TPM4 (IMX95_CCM_NUM_CLK_SRC + 112)
> +#define IMX95_CLK_TPM5 (IMX95_CCM_NUM_CLK_SRC + 113)
> +#define IMX95_CLK_TPM6 (IMX95_CCM_NUM_CLK_SRC + 114)
> +#define IMX95_CLK_TSTMR2 (IMX95_CCM_NUM_CLK_SRC + 115)
> +#define IMX95_CLK_USBPHYBURUNIN (IMX95_CCM_NUM_CLK_SRC + 116)
> +#define IMX95_CLK_USDHC1 (IMX95_CCM_NUM_CLK_SRC + 117)
> +#define IMX95_CLK_USDHC2 (IMX95_CCM_NUM_CLK_SRC + 118)
> +#define IMX95_CLK_USDHC3 (IMX95_CCM_NUM_CLK_SRC + 119)
> +#define IMX95_CLK_V2XPK (IMX95_CCM_NUM_CLK_SRC + 120)
> +#define IMX95_CLK_WAKEUPAXI (IMX95_CCM_NUM_CLK_SRC + 121)
> +#define IMX95_CLK_XSPISLVROOT (IMX95_CCM_NUM_CLK_SRC + 122)
> +#define IMX95_CLK_SEL_EXT (IMX95_CCM_NUM_CLK_SRC + 123 + 0)
> +#define IMX95_CLK_SEL_A55C0 (IMX95_CCM_NUM_CLK_SRC + 123 + 1)
> +#define IMX95_CLK_SEL_A55C1 (IMX95_CCM_NUM_CLK_SRC + 123 + 2)
> +#define IMX95_CLK_SEL_A55C2 (IMX95_CCM_NUM_CLK_SRC + 123 + 3)
> +#define IMX95_CLK_SEL_A55C3 (IMX95_CCM_NUM_CLK_SRC + 123 + 4)
> +#define IMX95_CLK_SEL_A55C4 (IMX95_CCM_NUM_CLK_SRC + 123 + 5)
> +#define IMX95_CLK_SEL_A55C5 (IMX95_CCM_NUM_CLK_SRC + 123 + 6)
> +#define IMX95_CLK_SEL_A55P (IMX95_CCM_NUM_CLK_SRC + 123 + 7)
> +#define IMX95_CLK_SEL_DRAM (IMX95_CCM_NUM_CLK_SRC + 123 + 8)
> +#define IMX95_CLK_SEL_TEMPSENSE (IMX95_CCM_NUM_CLK_SRC + 123 + 9)
> +
> +#endif /* __DT_BINDINGS_CLOCK_IMX95_H */
> diff --git a/arch/arm64/boot/dts/freescale/imx95-power.h b/arch/arm64/boot/dts/freescale/imx95-power.h
> new file mode 100644
> index 000000000000..a43779317fed
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx95-power.h
> @@ -0,0 +1,55 @@
> +/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */
> +/*
> + * Copyright 2024 NXP
> + */
> +
> +#ifndef __IMX95_POWER_H__
> +#define __IMX95_POWER_H__
> +
> +#define IMX95_PD_ANA 0
> +#define IMX95_PD_AON 1
> +#define IMX95_PD_BBSM 2
> +#define IMX95_PD_CAMERA 3
> +#define IMX95_PD_CCMSRCGPC 4
> +#define IMX95_PD_A55C0 5
> +#define IMX95_PD_A55C1 6
> +#define IMX95_PD_A55C2 7
> +#define IMX95_PD_A55C3 8
> +#define IMX95_PD_A55C4 9
> +#define IMX95_PD_A55C5 10
> +#define IMX95_PD_A55P 11
> +#define IMX95_PD_DDR 12
> +#define IMX95_PD_DISPLAY 13
> +#define IMX95_PD_GPU 14
> +#define IMX95_PD_HSIO_TOP 15
> +#define IMX95_PD_HSIO_WAON 16
> +#define IMX95_PD_M7 17
> +#define IMX95_PD_NETC 18
> +#define IMX95_PD_NOC 19
> +#define IMX95_PD_NPU 20
> +#define IMX95_PD_VPU 21
> +#define IMX95_PD_WAKEUP 22
> +
> +#define IMX95_PERF_ELE 0
> +#define IMX95_PERF_M33 1
> +#define IMX95_PERF_WAKEUP 2
> +#define IMX95_PERF_M7 3
> +#define IMX95_PERF_DRAM 4
> +#define IMX95_PERF_HSIO 5
> +#define IMX95_PERF_NPU 6
> +#define IMX95_PERF_NOC 7
> +#define IMX95_PERF_A55 8
> +#define IMX95_PERF_GPU 9
> +#define IMX95_PERF_VPU 10
> +#define IMX95_PERF_CAM 11
> +#define IMX95_PERF_DISP 12
> +#define IMX95_PERF_A55PER 13
> +#define IMX95_PERF_A55P 14
> +#define IMX95_PERF_A55C0 15
> +#define IMX95_PERF_A55C1 16
> +#define IMX95_PERF_A55C2 17
> +#define IMX95_PERF_A55C3 18
> +#define IMX95_PERF_A55C4 19
> +#define IMX95_PERF_A55C5 20
> +
> +#endif
> diff --git a/arch/arm64/boot/dts/freescale/imx95.dtsi b/arch/arm64/boot/dts/freescale/imx95.dtsi
> new file mode 100644
> index 000000000000..eeb995c39481
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx95.dtsi
> @@ -0,0 +1,1049 @@
> +// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
> +/*
> + * Copyright 2024 NXP
> + */
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/thermal/thermal.h>
> +
> +#include "imx95-clock.h"
> +#include "imx95-power.h"
> +
> +/ {
> + interrupt-parent = <&gic>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + idle-states {
> + entry-method = "psci";
> +
> + cpu_pd_wait: cpu-pd-wait {
> + compatible = "arm,idle-state";
> + arm,psci-suspend-param = <0x0010033>;
> + local-timer-stop;
> + entry-latency-us = <10000>;
> + exit-latency-us = <7000>;
> + min-residency-us = <27000>;
> + wakeup-latency-us = <15000>;
> + status = "disabled";
> + };
> + };
> +
> + A55_0: cpu at 0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a55";
> + reg = <0x0>;
> + enable-method = "psci";
> + #cooling-cells = <2>;
> + cpu-idle-states = <&cpu_pd_wait>;
> + power-domains = <&scmi_devpd IMX95_PERF_A55>;
> + power-domain-names = "perf";
> + i-cache-size = <32768>;
> + i-cache-line-size = <64>;
> + i-cache-sets = <128>;
> + d-cache-size = <32768>;
> + d-cache-line-size = <64>;
> + d-cache-sets = <128>;
> + next-level-cache = <&l2_cache_l0>;
> + };
> +
> + A55_1: cpu at 100 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a55";
> + reg = <0x100>;
> + enable-method = "psci";
> + #cooling-cells = <2>;
> + cpu-idle-states = <&cpu_pd_wait>;
> + power-domains = <&scmi_devpd IMX95_PERF_A55>;
> + power-domain-names = "perf";
> + i-cache-size = <32768>;
> + i-cache-line-size = <64>;
> + i-cache-sets = <128>;
> + d-cache-size = <32768>;
> + d-cache-line-size = <64>;
> + d-cache-sets = <128>;
> + next-level-cache = <&l2_cache_l1>;
> + };
> +
> + A55_2: cpu at 200 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a55";
> + reg = <0x200>;
> + enable-method = "psci";
> + #cooling-cells = <2>;
> + cpu-idle-states = <&cpu_pd_wait>;
> + power-domains = <&scmi_devpd IMX95_PERF_A55>;
> + power-domain-names = "perf";
> + i-cache-size = <32768>;
> + i-cache-line-size = <64>;
> + i-cache-sets = <128>;
> + d-cache-size = <32768>;
> + d-cache-line-size = <64>;
> + d-cache-sets = <128>;
> + next-level-cache = <&l2_cache_l2>;
> + };
> +
> + A55_3: cpu at 300 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a55";
> + reg = <0x300>;
> + enable-method = "psci";
> + #cooling-cells = <2>;
> + power-domains = <&scmi_devpd IMX95_PERF_A55>;
> + power-domain-names = "perf";
> + i-cache-size = <32768>;
> + i-cache-line-size = <64>;
> + i-cache-sets = <128>;
> + d-cache-size = <32768>;
> + d-cache-line-size = <64>;
> + d-cache-sets = <128>;
> + next-level-cache = <&l2_cache_l3>;
> + };
> +
> + A55_4: cpu at 400 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a55";
> + reg = <0x400>;
> + power-domains = <&scmi_devpd IMX95_PERF_A55>;
> + power-domain-names = "perf";
> + enable-method = "psci";
> + #cooling-cells = <2>;
> + cpu-idle-states = <&cpu_pd_wait>;
> + i-cache-size = <32768>;
> + i-cache-line-size = <64>;
> + i-cache-sets = <128>;
> + d-cache-size = <32768>;
> + d-cache-line-size = <64>;
> + d-cache-sets = <128>;
> + next-level-cache = <&l2_cache_l4>;
> + };
> +
> + A55_5: cpu at 500 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a55";
> + reg = <0x500>;
> + power-domains = <&scmi_devpd IMX95_PERF_A55>;
> + power-domain-names = "perf";
> + enable-method = "psci";
> + #cooling-cells = <2>;
> + cpu-idle-states = <&cpu_pd_wait>;
> + i-cache-size = <32768>;
> + i-cache-line-size = <64>;
> + i-cache-sets = <128>;
> + d-cache-size = <32768>;
> + d-cache-line-size = <64>;
> + d-cache-sets = <128>;
> + next-level-cache = <&l2_cache_l5>;
> + };
> +
> + l2_cache_l0: l2-cache-l0 {
> + compatible = "cache";
> + cache-size = <65536>;
> + cache-line-size = <64>;
> + cache-sets = <256>;
> + cache-level = <2>;
> + cache-unified;
> + next-level-cache = <&l3_cache>;
> + };
> +
> + l2_cache_l1: l2-cache-l1 {
> + compatible = "cache";
> + cache-size = <65536>;
> + cache-line-size = <64>;
> + cache-sets = <256>;
> + cache-level = <2>;
> + cache-unified;
> + next-level-cache = <&l3_cache>;
> + };
> +
> + l2_cache_l2: l2-cache-l2 {
> + compatible = "cache";
> + cache-size = <65536>;
> + cache-line-size = <64>;
> + cache-sets = <256>;
> + cache-level = <2>;
> + cache-unified;
> + next-level-cache = <&l3_cache>;
> + };
> +
> + l2_cache_l3: l2-cache-l3 {
> + compatible = "cache";
> + cache-size = <65536>;
> + cache-line-size = <64>;
> + cache-sets = <256>;
> + cache-level = <2>;
> + cache-unified;
> + next-level-cache = <&l3_cache>;
> + };
> +
> + l2_cache_l4: l2-cache-l4 {
> + compatible = "cache";
> + cache-size = <65536>;
> + cache-line-size = <64>;
> + cache-sets = <256>;
> + cache-level = <2>;
> + cache-unified;
> + next-level-cache = <&l3_cache>;
> + };
> +
> + l2_cache_l5: l2-cache-l5 {
> + compatible = "cache";
> + cache-size = <65536>;
> + cache-line-size = <64>;
> + cache-sets = <256>;
> + cache-level = <2>;
> + cache-unified;
> + next-level-cache = <&l3_cache>;
> + };
> +
> + l3_cache: l3-cache {
> + compatible = "cache";
> + cache-size = <524288>;
> + cache-line-size = <64>;
> + cache-sets = <1024>;
> + cache-level = <3>;
> + cache-unified;
> + };
> +
> + cpu-map {
> + cluster0 {
> + core0 {
> + cpu = <&A55_0>;
> + };
> +
> + core1 {
> + cpu = <&A55_1>;
> + };
> +
> + core2 {
> + cpu = <&A55_2>;
> + };
> +
> + core3 {
> + cpu = <&A55_3>;
> + };
> +
> + core4 {
> + cpu = <&A55_4>;
> + };
> +
> + core5 {
> + cpu = <&A55_5>;
> + };
> + };
> + };
> + };
> +
> + clk_ext1: clock-ext1 {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <133000000>;
> + clock-output-names = "clk_ext1";
> + };
> +
> + sai1_mclk: sai-mclk1 {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency= <0>;
> + clock-output-names = "sai1_mclk";
> + };
> +
> + sai2_mclk: sai-mclk2 {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency= <0>;
> + clock-output-names = "sai2_mclk";
> + };
> +
> + sai3_mclk: sai-mclk3 {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency= <0>;
> + clock-output-names = "sai3_mclk";
> + };
> +
> + sai4_mclk: sai-mclk4 {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency= <0>;
> + clock-output-names = "sai4_mclk";
> + };
> +
> + sai5_mclk: sai-mclk5 {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency= <0>;
> + clock-output-names = "sai5_mclk";
> + };
> +
> + osc_24m: osc-24m {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <24000000>;
> + clock-output-names = "osc_24m";
> + };
> +
> + sram1: sram at 20480000 {
> + compatible = "mmio-sram";
> + reg = <0x0 0x204c0000 0x0 0x18000>;
> + ranges = <0x0 0x0 0x204c0000 0x18000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + };
looks like it need general node name in
https://github.com/devicetree-org/devicetree-specification/releases/download/v0.4/devicetree-specification-v0.4.pdf
section 2.2.2
look like should be "sram-controller", please also check other node name to
match spec.
Frank
> +
> + firmware {
> + scmi {
> + compatible = "arm,scmi";
> + mboxes = <&mu2 5 0>, <&mu2 3 0>, <&mu2 3 1>;
> + shmem = <&scmi_buf0>, <&scmi_buf1>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + scmi_devpd: protocol at 11 {
> + reg = <0x11>;
> + #power-domain-cells = <1>;
> + };
> +
> + scmi_perf: protocol at 13 {
> + reg = <0x13>;
> + #power-domain-cells = <1>;
> + };
> +
> + scmi_clk: protocol at 14 {
> + reg = <0x14>;
> + #clock-cells = <1>;
> + };
> +
> + scmi_sensor: protocol at 15 {
> + reg = <0x15>;
> + #thermal-sensor-cells = <1>;
> + };
> + };
> + };
> +
> + pmu {
> + compatible = "arm,cortex-a55-pmu";
> + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
> + };
> +
> + thermal-zones {
> + a55-thermal {
> + polling-delay-passive = <250>;
> + polling-delay = <2000>;
> + thermal-sensors = <&scmi_sensor 1>;
> +
> + trips {
> + cpu_alert0: trip0 {
> + temperature = <85000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> +
> + cpu_crit0: trip1 {
> + temperature = <95000>;
> + hysteresis = <2000>;
> + type = "critical";
> + };
> + };
> +
> + cooling-maps {
> + map0 {
> + trip = <&cpu_alert0>;
> + cooling-device =
> + <&A55_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&A55_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&A55_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&A55_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&A55_4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&A55_5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + };
> + };
> + };
> + };
> +
> + psci {
> + compatible = "arm,psci-1.0";
> + method = "smc";
> + };
> +
> + timer {
> + compatible = "arm,armv8-timer";
> + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
> + clock-frequency = <24000000>;
> + arm,no-tick-in-suspend;
> + interrupt-parent = <&gic>;
> + };
> +
> + gic: interrupt-controller at 48000000 {
> + compatible = "arm,gic-v3";
> + reg = <0 0x48000000 0 0x10000>,
> + <0 0x48060000 0 0xc0000>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> + #interrupt-cells = <3>;
> + interrupt-controller;
> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-parent = <&gic>;
> + dma-noncoherent;
> + ranges;
> +
> + its: msi-controller at 48040000 {
> + compatible = "arm,gic-v3-its";
> + reg = <0 0x48040000 0 0x20000>;
> + msi-controller;
> + #msi-cells = <1>;
> + dma-noncoherent;
> + };
> + };
> +
> + soc {
> + compatible = "simple-bus";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + aips2: bus at 42000000 {
> + compatible = "fsl,aips-bus", "simple-bus";
> + reg = <0x0 0x42000000 0x0 0x800000>;
> + ranges = <0x42000000 0x0 0x42000000 0x8000000>,
> + <0x28000000 0x0 0x28000000 0x10000000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + mu7: mailbox at 42430000 {
> + compatible = "fsl,imx95-mu";
> + reg = <0x42430000 0x10000>;
> + interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>;
> + #mbox-cells = <2>;
> + status = "disabled";
> + };
> +
> + wdog3: watchdog at 42490000 {
> + compatible = "fsl,imx93-wdt";
> + reg = <0x42490000 0x10000>;
> + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>;
> + timeout-sec = <40>;
> + status = "disabled";
> + };
> +
> + tpm3: pwm at 424e0000 {
> + compatible = "fsl,imx7ulp-pwm";
> + reg = <0x424e0000 0x1000>;
> + clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>;
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> + tpm4: pwm at 424f0000 {
> + compatible = "fsl,imx7ulp-pwm";
> + reg = <0x424f0000 0x1000>;
> + clocks = <&scmi_clk IMX95_CLK_TPM4>;
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> + tpm5: pwm at 42500000 {
> + compatible = "fsl,imx7ulp-pwm";
> + reg = <0x42500000 0x1000>;
> + clocks = <&scmi_clk IMX95_CLK_TPM5>;
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> + tpm6: pwm at 42510000 {
> + compatible = "fsl,imx7ulp-pwm";
> + reg = <0x42510000 0x1000>;
> + clocks = <&scmi_clk IMX95_CLK_TPM6>;
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> + lpi2c3: i2c at 42530000 {
> + compatible = "fsl,imx95-lpi2c", "fsl,imx7ulp-lpi2c";
> + reg = <0x42530000 0x10000>;
> + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scmi_clk IMX95_CLK_LPI2C3>,
> + <&scmi_clk IMX95_CLK_BUSWAKEUP>;
> + clock-names = "per", "ipg";
> + status = "disabled";
> + };
> +
> + lpi2c4: i2c at 42540000 {
> + compatible = "fsl,imx95-lpi2c", "fsl,imx7ulp-lpi2c";
> + reg = <0x42540000 0x10000>;
> + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scmi_clk IMX95_CLK_LPI2C4>,
> + <&scmi_clk IMX95_CLK_BUSWAKEUP>;
> + clock-names = "per", "ipg";
> + status = "disabled";
> + };
> +
> + lpspi3: spi at 42550000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "fsl,imx95-spi", "fsl,imx7ulp-spi";
> + reg = <0x42550000 0x10000>;
> + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scmi_clk IMX95_CLK_LPSPI3>,
> + <&scmi_clk IMX95_CLK_BUSWAKEUP>;
> + clock-names = "per", "ipg";
> + status = "disabled";
> + };
> +
> + lpspi4: spi at 42560000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "fsl,imx95-spi", "fsl,imx7ulp-spi";
> + reg = <0x42560000 0x10000>;
> + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scmi_clk IMX95_CLK_LPSPI4>,
> + <&scmi_clk IMX95_CLK_BUSWAKEUP>;
> + clock-names = "per", "ipg";
> + status = "disabled";
> + };
> +
> + lpuart3: serial at 42570000 {
> + compatible = "fsl,imx95-lpuart", "fsl,imx8ulp-lpuart",
> + "fsl,imx7ulp-lpuart";
> + reg = <0x42570000 0x1000>;
> + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scmi_clk IMX95_CLK_LPUART3>;
> + clock-names = "ipg";
> + status = "disabled";
> + };
> +
> + lpuart4: serial at 42580000 {
> + compatible = "fsl,imx95-lpuart", "fsl,imx8ulp-lpuart",
> + "fsl,imx7ulp-lpuart";
> + reg = <0x42580000 0x1000>;
> + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scmi_clk IMX95_CLK_LPUART4>;
> + clock-names = "ipg";
> + status = "disabled";
> + };
> +
> + lpuart5: serial at 42590000 {
> + compatible = "fsl,imx95-lpuart", "fsl,imx8ulp-lpuart",
> + "fsl,imx7ulp-lpuart";
> + reg = <0x42590000 0x1000>;
> + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scmi_clk IMX95_CLK_LPUART5>;
> + clock-names = "ipg";
> + status = "disabled";
> + };
> +
> + lpuart6: serial at 425a0000 {
> + compatible = "fsl,imx95-lpuart", "fsl,imx8ulp-lpuart",
> + "fsl,imx7ulp-lpuart";
> + reg = <0x425a0000 0x1000>;
> + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scmi_clk IMX95_CLK_LPUART6>;
> + clock-names = "ipg";
> + status = "disabled";
> + };
> +
> + lpuart7: serial at 42690000 {
> + compatible = "fsl,imx95-lpuart", "fsl,imx8ulp-lpuart",
> + "fsl,imx7ulp-lpuart";
> + reg = <0x42690000 0x1000>;
> + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scmi_clk IMX95_CLK_LPUART7>;
> + clock-names = "ipg";
> + status = "disabled";
> + };
> +
> + lpuart8: serial at 426a0000 {
> + compatible = "fsl,imx95-lpuart", "fsl,imx8ulp-lpuart",
> + "fsl,imx7ulp-lpuart";
> + reg = <0x426a0000 0x1000>;
> + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scmi_clk IMX95_CLK_LPUART8>;
> + clock-names = "ipg";
> + status = "disabled";
> + };
> +
> + lpi2c5: i2c at 426b0000 {
> + compatible = "fsl,imx95-lpi2c", "fsl,imx7ulp-lpi2c";
> + reg = <0x426b0000 0x10000>;
> + interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scmi_clk IMX95_CLK_LPI2C5>,
> + <&scmi_clk IMX95_CLK_BUSWAKEUP>;
> + clock-names = "per", "ipg";
> + status = "disabled";
> + };
> +
> + lpi2c6: i2c at 426c0000 {
> + compatible = "fsl,imx95-lpi2c", "fsl,imx7ulp-lpi2c";
> + reg = <0x426c0000 0x10000>;
> + interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scmi_clk IMX95_CLK_LPI2C6>,
> + <&scmi_clk IMX95_CLK_BUSWAKEUP>;
> + clock-names = "per", "ipg";
> + status = "disabled";
> + };
> +
> + lpi2c7: i2c at 426d0000 {
> + compatible = "fsl,imx95-lpi2c", "fsl,imx7ulp-lpi2c";
> + reg = <0x426d0000 0x10000>;
> + interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scmi_clk IMX95_CLK_LPI2C7>,
> + <&scmi_clk IMX95_CLK_BUSWAKEUP>;
> + clock-names = "per", "ipg";
> + status = "disabled";
> + };
> +
> + lpi2c8: i2c at 426e0000 {
> + compatible = "fsl,imx95-lpi2c", "fsl,imx7ulp-lpi2c";
> + reg = <0x426e0000 0x10000>;
> + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scmi_clk IMX95_CLK_LPI2C8>,
> + <&scmi_clk IMX95_CLK_BUSWAKEUP>;
> + clock-names = "per", "ipg";
> + status = "disabled";
> + };
> +
> + lpspi5: spi at 426f0000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "fsl,imx95-spi", "fsl,imx7ulp-spi";
> + reg = <0x426f0000 0x10000>;
> + interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scmi_clk IMX95_CLK_LPSPI5>,
> + <&scmi_clk IMX95_CLK_BUSWAKEUP>;
> + clock-names = "per", "ipg";
> + status = "disabled";
> + };
> +
> + lpspi6: spi at 42700000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "fsl,imx95-spi", "fsl,imx7ulp-spi";
> + reg = <0x42700000 0x10000>;
> + interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scmi_clk IMX95_CLK_LPSPI6>,
> + <&scmi_clk IMX95_CLK_BUSWAKEUP>;
> + clock-names = "per", "ipg";
> + status = "disabled";
> + };
> +
> + lpspi7: spi at 42710000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "fsl,imx95-spi", "fsl,imx7ulp-spi";
> + reg = <0x42710000 0x10000>;
> + interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scmi_clk IMX95_CLK_LPSPI7>,
> + <&scmi_clk IMX95_CLK_BUSWAKEUP>;
> + clock-names = "per", "ipg";
> + status = "disabled";
> + };
> +
> + lpspi8: spi at 42720000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "fsl,imx95-spi", "fsl,imx7ulp-spi";
> + reg = <0x42720000 0x10000>;
> + interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scmi_clk IMX95_CLK_LPSPI8>,
> + <&scmi_clk IMX95_CLK_BUSWAKEUP>;
> + clock-names = "per", "ipg";
> + status = "disabled";
> + };
> +
> + mu8: mailbox at 42730000 {
> + compatible = "fsl,imx95-mu";
> + reg = <0x42730000 0x10000>;
> + interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>;
> + #mbox-cells = <2>;
> + status = "disabled";
> + };
> + };
> +
> + aips3: bus at 42800000 {
> + compatible = "fsl,aips-bus", "simple-bus";
> + reg = <0 0x42800000 0 0x800000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x42800000 0x0 0x42800000 0x800000>;
> +
> + usdhc1: mmc at 42850000 {
> + compatible = "fsl,imx95-usdhc", "fsl,imx8mm-usdhc";
> + reg = <0x42850000 0x10000>;
> + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>,
> + <&scmi_clk IMX95_CLK_WAKEUPAXI>,
> + <&scmi_clk IMX95_CLK_USDHC1>;
> + clock-names = "ipg", "ahb", "per";
> + assigned-clocks = <&scmi_clk IMX95_CLK_USDHC1>;
> + assigned-clock-parents = <&scmi_clk IMX95_CLK_SYSPLL1_PFD1>;
> + assigned-clock-rates = <400000000>;
> + bus-width = <8>;
> + fsl,tuning-start-tap = <1>;
> + fsl,tuning-step= <2>;
> + status = "disabled";
> + };
> +
> + usdhc2: mmc at 42860000 {
> + compatible = "fsl,imx95-usdhc", "fsl,imx8mm-usdhc";
> + reg = <0x42860000 0x10000>;
> + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>,
> + <&scmi_clk IMX95_CLK_WAKEUPAXI>,
> + <&scmi_clk IMX95_CLK_USDHC2>;
> + clock-names = "ipg", "ahb", "per";
> + assigned-clocks = <&scmi_clk IMX95_CLK_USDHC2>;
> + assigned-clock-parents = <&scmi_clk IMX95_CLK_SYSPLL1_PFD1>;
> + assigned-clock-rates = <400000000>;
> + bus-width = <4>;
> + fsl,tuning-start-tap = <1>;
> + fsl,tuning-step= <2>;
> + status = "disabled";
> + };
> +
> + usdhc3: mmc at 428b0000 {
> + compatible = "fsl,imx95-usdhc", "fsl,imx8mm-usdhc";
> + reg = <0x428b0000 0x10000>;
> + interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>,
> + <&scmi_clk IMX95_CLK_WAKEUPAXI>,
> + <&scmi_clk IMX95_CLK_USDHC3>;
> + clock-names = "ipg", "ahb", "per";
> + assigned-clock-parents = <&scmi_clk IMX95_CLK_SYSPLL1_PFD1>;
> + assigned-clock-rates = <400000000>;
> + bus-width = <4>;
> + fsl,tuning-start-tap = <1>;
> + fsl,tuning-step= <2>;
> + status = "disabled";
> + };
> + };
> +
> + gpio2: gpio at 43810000 {
> + compatible = "fsl,imx95-gpio", "fsl,imx8ulp-gpio";
> + reg = <0x0 0x43810000 0x0 0x1000>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>,
> + <&scmi_clk IMX95_CLK_BUSWAKEUP>;
> + clock-names = "gpio", "port";
> + };
> +
> + gpio3: gpio at 43820000 {
> + compatible = "fsl,imx95-gpio", "fsl,imx8ulp-gpio";
> + reg = <0x0 0x43820000 0x0 0x1000>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>,
> + <&scmi_clk IMX95_CLK_BUSWAKEUP>;
> + clock-names = "gpio", "port";
> + };
> +
> + gpio4: gpio at 43840000 {
> + compatible = "fsl,imx95-gpio", "fsl,imx8ulp-gpio";
> + reg = <0x0 0x43840000 0x0 0x1000>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>,
> + <&scmi_clk IMX95_CLK_BUSWAKEUP>;
> + clock-names = "gpio", "port";
> + };
> +
> + gpio5: gpio at 43850000 {
> + compatible = "fsl,imx95-gpio", "fsl,imx8ulp-gpio";
> + reg = <0x0 0x43850000 0x0 0x1000>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>,
> + <&scmi_clk IMX95_CLK_BUSWAKEUP>;
> + clock-names = "gpio", "port";
> + };
> +
> + aips1: bus at 44000000 {
> + compatible = "fsl,aips-bus", "simple-bus";
> + reg = <0x0 0x44000000 0x0 0x800000>;
> + ranges = <0x44000000 0x0 0x44000000 0x800000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + mu1: mailbox at 44220000 {
> + compatible = "fsl,imx95-mu";
> + reg = <0x44220000 0x10000>;
> + interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scmi_clk IMX95_CLK_BUSAON>;
> + #mbox-cells = <2>;
> + status = "disabled";
> + };
> +
> + tpm1: pwm at 44310000 {
> + compatible = "fsl,imx7ulp-pwm";
> + reg = <0x44310000 0x1000>;
> + clocks = <&scmi_clk IMX95_CLK_BUSAON>;
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> + tpm2: pwm at 44320000 {
> + compatible = "fsl,imx7ulp-pwm";
> + reg = <0x44320000 0x1000>;
> + clocks = <&scmi_clk IMX95_CLK_TPM2>;
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> + lpi2c1: i2c at 44340000 {
> + compatible = "fsl,imx95-lpi2c", "fsl,imx7ulp-lpi2c";
> + reg = <0x44340000 0x10000>;
> + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scmi_clk IMX95_CLK_LPI2C1>,
> + <&scmi_clk IMX95_CLK_BUSAON>;
> + clock-names = "per", "ipg";
> + status = "disabled";
> + };
> +
> + lpi2c2: i2c at 44350000 {
> + compatible = "fsl,imx95-lpi2c", "fsl,imx7ulp-lpi2c";
> + reg = <0x44350000 0x10000>;
> + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scmi_clk IMX95_CLK_LPI2C2>,
> + <&scmi_clk IMX95_CLK_BUSAON>;
> + clock-names = "per", "ipg";
> + status = "disabled";
> + };
> +
> + lpspi1: spi at 44360000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "fsl,imx95-spi", "fsl,imx7ulp-spi";
> + reg = <0x44360000 0x10000>;
> + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scmi_clk IMX95_CLK_LPSPI1>,
> + <&scmi_clk IMX95_CLK_BUSAON>;
> + clock-names = "per", "ipg";
> + status = "disabled";
> + };
> +
> + lpspi2: spi at 44370000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "fsl,imx95-spi", "fsl,imx7ulp-spi";
> + reg = <0x44370000 0x10000>;
> + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scmi_clk IMX95_CLK_LPSPI2>,
> + <&scmi_clk IMX95_CLK_BUSAON>;
> + clock-names = "per", "ipg";
> + status = "disabled";
> + };
> +
> + lpuart1: serial at 44380000 {
> + compatible = "fsl,imx95-lpuart", "fsl,imx8ulp-lpuart",
> + "fsl,imx7ulp-lpuart";
> + reg = <0x44380000 0x1000>;
> + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scmi_clk IMX95_CLK_LPUART1>;
> + clock-names = "ipg";
> + status = "disabled";
> + };
> +
> + lpuart2: serial at 44390000 {
> + compatible = "fsl,imx95-lpuart", "fsl,imx8ulp-lpuart",
> + "fsl,imx7ulp-lpuart";
> + reg = <0x44390000 0x1000>;
> + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scmi_clk IMX95_CLK_LPUART2>;
> + clock-names = "ipg";
> + status = "disabled";
> + };
> +
> + adc1: adc at 44530000 {
> + compatible = "nxp,imx93-adc";
> + reg = <0x44530000 0x10000>;
> + interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scmi_clk IMX95_CLK_ADC>;
> + clock-names = "ipg";
> + status = "disabled";
> + };
> +
> + mu2: mailbox at 445b0000 {
> + compatible = "fsl,imx95-mu";
> + reg = <0x445b0000 0x1000>;
> + ranges;
> + interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + #mbox-cells = <2>;
> +
> + sram0: sram at 445b1000 {
> + compatible = "mmio-sram";
> + reg = <0x445b1000 0x400>;
> + ranges = <0x0 0x445b1000 0x400>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + scmi_buf0: scmi-sram-section at 0 {
> + compatible = "arm,scmi-shmem";
> + reg = <0x0 0x80>;
> + };
> +
> + scmi_buf1: scmi-sram-section at 80 {
> + compatible = "arm,scmi-shmem";
> + reg = <0x80 0x80>;
> + };
> + };
> +
> + };
> +
> + mu3: mailbox at 445d0000 {
> + compatible = "fsl,imx95-mu";
> + reg = <0x445d0000 0x10000>;
> + interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scmi_clk IMX95_CLK_BUSAON>;
> + #mbox-cells = <2>;
> + status = "disabled";
> + };
> +
> + mu4: mailbox at 445f0000 {
> + compatible = "fsl,imx95-mu";
> + reg = <0x445f0000 0x10000>;
> + interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scmi_clk IMX95_CLK_BUSAON>;
> + #mbox-cells = <2>;
> + status = "disabled";
> + };
> +
> + mu6: mailbox at 44630000 {
> + compatible = "fsl,imx95-mu";
> + reg = <0x44630000 0x10000>;
> + interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scmi_clk IMX95_CLK_BUSAON>;
> + #mbox-cells = <2>;
> + status = "disabled";
> + };
> + };
> +
> + mailbox at 47320000 {
> + compatible = "fsl,imx95-mu-v2x";
> + reg = <0x0 0x47320000 0x0 0x10000>;
> + interrupts = <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>;
> + #mbox-cells = <2>;
> + };
> +
> + mailbox at 47350000 {
> + compatible = "fsl,imx95-mu-v2x";
> + reg = <0x0 0x47350000 0x0 0x10000>;
> + interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
> + #mbox-cells = <2>;
> + };
> +
> + /* GPIO1 is under exclusive control of System Manager */
> + gpio1: gpio at 47400000 {
> + compatible = "fsl,imx95-gpio", "fsl,imx8ulp-gpio";
> + reg = <0x0 0x47400000 0x0 0x1000>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + clocks = <&scmi_clk IMX95_CLK_M33>,
> + <&scmi_clk IMX95_CLK_M33>;
> + clock-names = "gpio", "port";
> + status = "disabled";
> + };
> +
> + elemu0: mailbox at 47520000 {
> + compatible = "fsl,imx95-mu-ele";
> + reg = <0x0 0x47520000 0x0 0x10000>;
> + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
> + #mbox-cells = <2>;
> + status = "disabled";
> + };
> +
> + elemu1: mailbox at 47530000 {
> + compatible = "fsl,imx95-mu-ele";
> + reg = <0x0 0x47530000 0x0 0x10000>;
> + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
> + #mbox-cells = <2>;
> + status = "disabled";
> + };
> +
> + elemu2: mailbox at 47540000 {
> + compatible = "fsl,imx95-mu-ele";
> + reg = <0x0 0x47540000 0x0 0x10000>;
> + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
> + #mbox-cells = <2>;
> + status = "disabled";
> + };
> +
> + elemu3: mailbox at 47550000 {
> + compatible = "fsl,imx95-mu-ele";
> + reg = <0x0 0x47550000 0x0 0x10000>;
> + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
> + #mbox-cells = <2>;
> + };
> +
> + elemu4: mailbox at 47560000 {
> + compatible = "fsl,imx95-mu-ele";
> + reg = <0x0 0x47560000 0x0 0x10000>;
> + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
> + #mbox-cells = <2>;
> + status = "disabled";
> + };
> +
> + elemu5: mailbox at 47570000 {
> + compatible = "fsl,imx95-mu-ele";
> + reg = <0x0 0x47570000 0x0 0x10000>;
> + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
> + #mbox-cells = <2>;
> + status = "disabled";
> + };
> +
> + aips4: bus at 49000000 {
> + compatible = "fsl,aips-bus", "simple-bus";
> + reg = <0x0 0x49000000 0x0 0x800000>;
> + ranges = <0x49000000 0x0 0x49000000 0x800000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + smmu: iommu at 490d0000 {
> + compatible = "arm,smmu-v3";
> + reg = <0x490d0000 0x100000>;
> + interrupts = <GIC_SPI 325 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 328 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 334 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 326 IRQ_TYPE_EDGE_RISING>;
> + interrupt-names = "eventq", "gerror", "priq", "cmdq-sync";
> + #iommu-cells = <1>;
> + status = "disabled";
> + };
> + };
> + };
> +};
>
> --
> 2.37.1
>
More information about the linux-arm-kernel
mailing list