[PATCH v7 04/18] drm/mediatek: Add DRM_MODE_ROTATE_0 to rotation property

Shawn Sung shawn.sung at mediatek.com
Thu May 2 03:38:34 PDT 2024


From: Hsiao Chien Sung <shawn.sung at mediatek.com>

Always add DRM_MODE_ROTATE_0 to rotation property to meet
IGT's (Intel GPU Tools) requirement.

Reviewed-by: CK Hu <ck.hu at mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>
Signed-off-by: Hsiao Chien Sung <shawn.sung at mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_ddp_comp.h |  6 +++++-
 drivers/gpu/drm/mediatek/mtk_disp_ovl.c | 17 +++++------------
 drivers/gpu/drm/mediatek/mtk_plane.c    |  2 +-
 3 files changed, 11 insertions(+), 14 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_ddp_comp.h b/drivers/gpu/drm/mediatek/mtk_ddp_comp.h
index 26236691ce4c2..f7fe2e08dc8e2 100644
--- a/drivers/gpu/drm/mediatek/mtk_ddp_comp.h
+++ b/drivers/gpu/drm/mediatek/mtk_ddp_comp.h
@@ -192,7 +192,11 @@ unsigned int mtk_ddp_comp_supported_rotations(struct mtk_ddp_comp *comp)
 	if (comp->funcs && comp->funcs->supported_rotations)
 		return comp->funcs->supported_rotations(comp->dev);
 
-	return 0;
+	/*
+	 * In order to pass IGT tests, DRM_MODE_ROTATE_0 is required when
+	 * rotation is not supported.
+	 */
+	return DRM_MODE_ROTATE_0;
 }
 
 static inline unsigned int mtk_ddp_comp_layer_nr(struct mtk_ddp_comp *comp)
diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
index b552a02d7eae7..862ab683ed1b4 100644
--- a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
+++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
@@ -296,27 +296,20 @@ int mtk_ovl_layer_check(struct device *dev, unsigned int idx,
 			struct mtk_plane_state *mtk_state)
 {
 	struct drm_plane_state *state = &mtk_state->base;
-	unsigned int rotation = 0;
 
-	rotation = drm_rotation_simplify(state->rotation,
-					 DRM_MODE_ROTATE_0 |
-					 DRM_MODE_REFLECT_X |
-					 DRM_MODE_REFLECT_Y);
-	rotation &= ~DRM_MODE_ROTATE_0;
-
-	/* We can only do reflection, not rotation */
-	if ((rotation & DRM_MODE_ROTATE_MASK) != 0)
+	/* check if any unsupported rotation is set */
+	if (state->rotation & ~mtk_ovl_supported_rotations(dev))
 		return -EINVAL;
 
 	/*
 	 * TODO: Rotating/reflecting YUV buffers is not supported at this time.
 	 *	 Only RGB[AX] variants are supported.
+	 *	 Since DRM_MODE_ROTATE_0 means "no rotation", we should not
+	 *	 reject layers with this property.
 	 */
-	if (state->fb->format->is_yuv && rotation != 0)
+	if (state->fb->format->is_yuv && (state->rotation & ~DRM_MODE_ROTATE_0))
 		return -EINVAL;
 
-	state->rotation = rotation;
-
 	return 0;
 }
 
diff --git a/drivers/gpu/drm/mediatek/mtk_plane.c b/drivers/gpu/drm/mediatek/mtk_plane.c
index a74b26d359857..1723d4333f371 100644
--- a/drivers/gpu/drm/mediatek/mtk_plane.c
+++ b/drivers/gpu/drm/mediatek/mtk_plane.c
@@ -338,7 +338,7 @@ int mtk_plane_init(struct drm_device *dev, struct drm_plane *plane,
 		return err;
 	}
 
-	if (supported_rotations & ~DRM_MODE_ROTATE_0) {
+	if (supported_rotations) {
 		err = drm_plane_create_rotation_property(plane,
 							 DRM_MODE_ROTATE_0,
 							 supported_rotations);
-- 
2.18.0




More information about the linux-arm-kernel mailing list