[PATCH] ARM: dts: imx7s-warp: Pass OV2680 link-frequencies

[Rob Herring]

On Thu, 28 Mar 2024 12:19:54 -0300, Fabio Estevam wrote:
> From: Fabio Estevam <festevam at denx.de>
> 
> Since commit 63b0cd30b78e ("media: ov2680: Add bus-cfg / endpoint
> property verification") the ov2680 no longer probes on a imx7s-warp7:
> 
> ov2680 1-0036: error -EINVAL: supported link freq 330000000 not found
> ov2680 1-0036: probe with driver ov2680 failed with error -22
> 
> Fix it by passing the required 'link-frequencies' property as
> recommended by:
> 
> https://www.kernel.org/doc/html/v6.9-rc1/driver-api/media/camera-sensor.html#handling-clocks
> 
> Cc: stable at vger.kernel.org
> Fixes: 63b0cd30b78e ("media: ov2680: Add bus-cfg / endpoint property verification")
> Signed-off-by: Fabio Estevam <festevam at denx.de>
> ---
>  arch/arm/boot/dts/nxp/imx/imx7s-warp.dts | 1 +
>  1 file changed, 1 insertion(+)
> 


My bot found new DTB warnings on the .dts files added or changed in this
series.

Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.

If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:

  pip3 install dtschema --upgrade


New warnings running 'make CHECK_DTBS=y nxp/imx/imx7s-warp.dtb' for 20240328151954.2517368-1-festevam at gmail.com:

arch/arm/boot/dts/nxp/imx/imx7s-warp.dtb: camera at 36: port:endpoint: Unevaluated properties are not allowed ('clock-lanes', 'data-lanes', 'link-frequencies' were unexpected)
	from schema $id: http://devicetree.org/schemas/media/i2c/ovti,ov2680.yaml#