[PATCH v4 1/6] dt-bindindgs: clock: nxp: support i.MX95 VPU CSR module

[Krzysztof Kozlowski]

On 14/03/2024 14:25, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan at nxp.com>
> 
> The i.MX95 VPU_CSR contains control and status registers for VPU
> status, pending transaction status, and clock gating controls.
> 
> This patch is to add clock features for VPU CSR.

Fix the subject prefix. You mess with people's filters.

> 
> Signed-off-by: Peng Fan <peng.fan at nxp.com>
> ---
>  .../bindings/clock/nxp,imx95-vpu-csr.yaml          | 50 ++++++++++++++++++++++
>  include/dt-bindings/clock/nxp,imx95-clock.h        | 14 ++++++
>  2 files changed, 64 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/clock/nxp,imx95-vpu-csr.yaml b/Documentation/devicetree/bindings/clock/nxp,imx95-vpu-csr.yaml
> new file mode 100644
> index 000000000000..4a1c6dcfe3f8
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/nxp,imx95-vpu-csr.yaml
> @@ -0,0 +1,50 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/clock/nxp,imx95-vpu-csr.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: NXP i.MX95 VPUMIX Block Control
> +
> +maintainers:
> +  - Peng Fan <peng.fan at nxp.com>
> +
> +properties:
> +  compatible:
> +    items:
> +      - const: nxp,imx95-vpu-csr
> +      - const: syscon
> +
> +  reg:
> +    maxItems: 1
> +
> +  power-domains:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +
> +  '#clock-cells':
> +    const: 1
> +    description:
> +      The clock consumer should specify the desired clock by having the clock
> +      ID in its "clocks" phandle cell. See
> +      include/dt-bindings/clock/nxp,imx95-clock.h
> +
> +required:
> +  - compatible
> +  - reg
> +  - '#clock-cells'
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    syscon at 4c410000 {
> +      compatible = "nxp,imx95-vpu-csr", "syscon";
> +      reg = <0x4c410000 0x10000>;
> +      #clock-cells = <1>;
> +      clocks = <&scmi_clk 114>;
> +      power-domains = <&scmi_devpd 21>;
> +    };
> +...
> diff --git a/include/dt-bindings/clock/nxp,imx95-clock.h b/include/dt-bindings/clock/nxp,imx95-clock.h
> new file mode 100644
> index 000000000000..9d8f0a6d12d0
> --- /dev/null
> +++ b/include/dt-bindings/clock/nxp,imx95-clock.h

If the header is only for clock IDs for this binding, then keep the same
filename as binding filename.

Best regards,
Krzysztof