[PATCH v4 4/4] arm64: dts: imx8qxp: add asrc[0, 1], esai0, spdif[0, 1] and sai[4, 5]
Frank Li
Frank.li at nxp.com
Thu Mar 7 08:26:29 PST 2024
On Thu, Mar 07, 2024 at 08:22:25AM +0100, Alexander Stein wrote:
> Hi Frank,
>
> Am Mittwoch, 6. März 2024, 16:19:18 CET schrieb Frank Li:
> > On Wed, Mar 06, 2024 at 08:20:00AM +0100, Alexander Stein wrote:
> > > Hi Frank,
> > >
> > > thanks for the patch.
> > >
> > > Am Dienstag, 5. März 2024, 18:33:05 CET schrieb Frank Li:
> > > > Add asrc[0,1], esai0, spdif[0,1], sai[4,5] and related lpcg node for
> > > > imx8 audio subsystem.
> > > >
> > > > Signed-off-by: Frank Li <Frank.Li at nxp.com>
> > > > ---
> > > > arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi | 304 +++++++++++++++++++++++
> > > > 1 file changed, 304 insertions(+)
> > > >
> > > > diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
> > > > index 07afeb78ed564..78305559f15c9 100644
> > > > --- a/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
> > > > +++ b/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
> > > > @@ -6,6 +6,7 @@
> > > >
> > > > #include <dt-bindings/clock/imx8-clock.h>
> > > > #include <dt-bindings/clock/imx8-lpcg.h>
> > > > +#include <dt-bindings/dma/fsl-edma.h>
> > > > #include <dt-bindings/firmware/imx/rsrc.h>
> > > >
> > > > audio_ipg_clk: clock-audio-ipg {
> > > > @@ -481,4 +482,307 @@ acm: acm at 59e00000 {
> > > > "sai3_rx_bclk",
> > > > "sai4_rx_bclk";
> > > > };
> > > > +
> > > > + asrc0: asrc at 59000000 {
> > >
> > > Please insert nodes sorted by address. ASRC0 is the very first node.
> > >
> > > > + compatible = "fsl,imx8qm-asrc";
> > > > + reg = <0x59000000 0x10000>;
> > > > + interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
> > > > + clocks = <&asrc0_lpcg 0>,
> > > > + <&asrc0_lpcg 0>,
> > > > + <&aud_pll_div0_lpcg 0>,
> > > > + <&aud_pll_div1_lpcg 0>,
> > > > + <&acm IMX_ADMA_ACM_AUD_CLK0_SEL>,
> > > > + <&acm IMX_ADMA_ACM_AUD_CLK1_SEL>,
> > > > + <&clk_dummy>,
> > > > + <&clk_dummy>,
> > > > + <&clk_dummy>,
> > > > + <&clk_dummy>,
> > > > + <&clk_dummy>,
> > > > + <&clk_dummy>,
> > > > + <&clk_dummy>,
> > > > + <&clk_dummy>,
> > > > + <&clk_dummy>,
> > > > + <&clk_dummy>,
> > > > + <&clk_dummy>,
> > > > + <&clk_dummy>,
> > > > + <&clk_dummy>;
> > > > + clock-names = "mem", "ipg",
> > > > + "asrck_0", "asrck_1", "asrck_2", "asrck_3",
> > > > + "asrck_4", "asrck_5", "asrck_6", "asrck_7",
> > > > + "asrck_8", "asrck_9", "asrck_a", "asrck_b",
> > > > + "asrck_c", "asrck_d", "asrck_e", "asrck_f",
> > > > + "spba";
> > > > + dmas = <&edma0 0 0 0>,
> > > > + <&edma0 1 0 0>,
> > > > + <&edma0 2 0 0>,
> > > > + <&edma0 3 0 FSL_EDMA_RX>,
> > > > + <&edma0 4 0 FSL_EDMA_RX>,
> > > > + <&edma0 5 0 FSL_EDMA_RX>;
> > > > + /* tx* is output channel of asrc, it is rx channel for eDMA */
> > > > + dma-names = "rxa", "rxb", "rxc", "txa", "txb", "txc";
> > > > + fsl,asrc-rate = <8000>;
> > > > + fsl,asrc-width = <16>;
> > > > + fsl,asrc-clk-map = <0>;
> > > > + power-domains = <&pd IMX_SC_R_ASRC_0>;
> > > > + status = "disabled";
> > > > + };
> > > > +
> > > > + esai0: esai at 59010000 {
> > > > + compatible = "fsl,imx8qm-esai", "fsl,imx6ull-esai";
> > > > + reg = <0x59010000 0x10000>;
> > > > + interrupts = <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>;
> > > > + clocks = <&esai0_lpcg 1>, <&esai0_lpcg 0>, <&esai0_lpcg 1>, <&clk_dummy>;
> > > > + clock-names = "core", "extal", "fsys", "spba";
> > > > + dmas = <&edma0 6 0 FSL_EDMA_RX>, <&edma0 7 0 0>;
> > > > + dma-names = "rx", "tx";
> > > > + power-domains = <&pd IMX_SC_R_ESAI_0>;
> > > > + status = "disabled";
> > > > + };
> > > > +
> > > > + spdif0: spdif at 59020000 {
> > > > + compatible = "fsl,imx8qm-spdif";
> > > > + reg = <0x59020000 0x10000>;
> > > > + interrupts = <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>, /* rx */
> > > > + <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>; /* tx */
> > > > + clocks = <&spdif0_lpcg 1>, /* core */
> > > > + <&clk_dummy>, /* rxtx0 */
> > > > + <&spdif0_lpcg 0>, /* rxtx1 */
> > > > + <&clk_dummy>, /* rxtx2 */
> > > > + <&clk_dummy>, /* rxtx3 */
> > > > + <&clk_dummy>, /* rxtx4 */
> > > > + <&audio_ipg_clk>, /* rxtx5 */
> > > > + <&clk_dummy>, /* rxtx6 */
> > > > + <&clk_dummy>, /* rxtx7 */
> > > > + <&clk_dummy>; /* spba */
> > > > + clock-names = "core", "rxtx0", "rxtx1", "rxtx2", "rxtx3", "rxtx4",
> > > > + "rxtx5", "rxtx6", "rxtx7", "spba";
> > > > + dmas = <&edma0 8 0 (FSL_EDMA_MULTI_FIFO | FSL_EDMA_RX)>,
> > > > + <&edma0 9 0 FSL_EDMA_MULTI_FIFO>;
> > > > + dma-names = "rx", "tx";
> > > > + power-domains = <&pd IMX_SC_R_SPDIF_0>;
> > > > + status = "disabled";
> > > > + };
> > > > +
> > > > + spdif1: spdif at 59030000 {
> > >
> > > That's imx8qm only, no?
> >
> > I am not sure what means. why do you think it is imx8qm only? It is for
> > imx8qm, imx8qxp, imx8dxl.
>
> According to Table- 2-6 (Audio DMA memory Map) in i.MX8X RM Rev. 0 05/2020,
> the lasted one available on the webpage, address 0x59030000 is reserved.
> I read that as there is no periphery available. This matches the feature list
> in 1.1.2 Features, where "1x SPDIF" is stated.
>
> So spdif1 is only for imx8qm (no idea about imx8dxl though) and should be
> listed in a file called imx8qm-ss-audio.dtsi which is only included in
> imx8qm.dtsi.
>
Thanks, I will do that.
> Thanks and best regards
> Alexander
>
> >
> > Frank
> >
> > >
> > > > + compatible = "fsl,imx8qm-spdif";
> > > > + reg = <0x59030000 0x10000>;
> > > > + interrupts = <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>, /* rx */
> > > > + <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>; /* tx */
> > > > + clocks = <&spdif1_lpcg 1>, /* core */
> > > > + <&clk_dummy>, /* rxtx0 */
> > > > + <&spdif1_lpcg 0>, /* rxtx1 */
> > > > + <&clk_dummy>, /* rxtx2 */
> > > > + <&clk_dummy>, /* rxtx3 */
> > > > + <&clk_dummy>, /* rxtx4 */
> > > > + <&audio_ipg_clk>, /* rxtx5 */
> > > > + <&clk_dummy>, /* rxtx6 */
> > > > + <&clk_dummy>, /* rxtx7 */
> > > > + <&clk_dummy>; /* spba */
> > > > + clock-names = "core", "rxtx0", "rxtx1", "rxtx2", "rxtx3", "rxtx4",
> > > > + "rxtx5", "rxtx6", "rxtx7", "spba";
> > > > + dmas = <&edma0 10 0 (FSL_EDMA_MULTI_FIFO | FSL_EDMA_RX)>,
> > > > + <&edma0 11 0 FSL_EDMA_MULTI_FIFO>;
> > > > + dma-names = "rx", "tx";
> > > > + power-domains = <&pd IMX_SC_R_SPDIF_1>;
> > > > + status = "disabled";
> > > > + };
> > > > +
> > > > + asrc1: asrc at 59800000 {
> > >
> > > Insert this between dsp and edma1, sorted by address.
> > >
> > > > + compatible = "fsl,imx8qm-asrc";
> > > > + reg = <0x59800000 0x10000>;
> > > > + interrupts = <GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>;
> > > > + clocks = <&asrc1_lpcg 0>,
> > > > + <&asrc1_lpcg 0>,
> > > > + <&aud_pll_div0_lpcg 0>,
> > > > + <&aud_pll_div1_lpcg 0>,
> > > > + <&acm IMX_ADMA_ACM_AUD_CLK0_SEL>,
> > > > + <&acm IMX_ADMA_ACM_AUD_CLK1_SEL>,
> > > > + <&clk_dummy>,
> > > > + <&clk_dummy>,
> > > > + <&clk_dummy>,
> > > > + <&clk_dummy>,
> > > > + <&clk_dummy>,
> > > > + <&clk_dummy>,
> > > > + <&clk_dummy>,
> > > > + <&clk_dummy>,
> > > > + <&clk_dummy>,
> > > > + <&clk_dummy>,
> > > > + <&clk_dummy>,
> > > > + <&clk_dummy>,
> > > > + <&clk_dummy>;
> > > > + clock-names = "mem", "ipg",
> > > > + "asrck_0", "asrck_1", "asrck_2", "asrck_3",
> > > > + "asrck_4", "asrck_5", "asrck_6", "asrck_7",
> > > > + "asrck_8", "asrck_9", "asrck_a", "asrck_b",
> > > > + "asrck_c", "asrck_d", "asrck_e", "asrck_f",
> > > > + "spba";
> > > > + dmas = <&edma1 0 0 0>,
> > > > + <&edma1 1 0 0>,
> > > > + <&edma1 2 0 0>,
> > > > + <&edma1 3 0 FSL_EDMA_RX>,
> > > > + <&edma1 4 0 FSL_EDMA_RX>,
> > > > + <&edma1 5 0 FSL_EDMA_RX>;
> > > > + /* tx* is output channel of asrc, it is rx channel for eDMA */
> > > > + dma-names = "rxa", "rxb", "rxc", "txa", "txb", "txc";
> > > > + fsl,asrc-rate = <8000>;
> > > > + fsl,asrc-width = <16>;
> > > > + fsl,asrc-clk-map = <1>;
> > > > + power-domains = <&pd IMX_SC_R_ASRC_1>;
> > > > + status = "disabled";
> > > > + };
> > > > +
> > > > + sai4: sai at 59820000 {
> > > > + compatible = "fsl,imx8qm-sai";
> > > > + reg = <0x59820000 0x10000>;
> > > > + interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
> > > > + clocks = <&sai4_lpcg 1>,
> > > > + <&clk_dummy>,
> > > > + <&sai4_lpcg 0>,
> > > > + <&clk_dummy>,
> > > > + <&clk_dummy>;
> > > > + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
> > > > + dmas = <&edma1 8 0 FSL_EDMA_RX>, <&edma1 9 0 0>;
> > > > + dma-names = "rx", "tx";
> > > > + power-domains = <&pd IMX_SC_R_SAI_4>;
> > > > + status = "disabled";
> > > > + };
> > > > +
> > > > + sai5: sai at 59830000 {
> > > > + compatible = "fsl,imx8qm-sai";
> > > > + reg = <0x59830000 0x10000>;
> > > > + interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
> > > > + clocks = <&sai5_lpcg 1>,
> > > > + <&clk_dummy>,
> > > > + <&sai5_lpcg 0>,
> > > > + <&clk_dummy>,
> > > > + <&clk_dummy>;
> > > > + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
> > > > + dmas = <&edma1 10 0 0>;
> > > > + dma-names = "tx";
> > > > + power-domains = <&pd IMX_SC_R_SAI_5>;
> > > > + status = "disabled";
> > > > + };
> > > > +
> > > > + amix: amix at 59840000 {
> > > > + compatible = "fsl,imx8qm-audmix";
> > > > + reg = <0x59840000 0x10000>;
> > > > + clocks = <&amix_lpcg 0>;
> > > > + clock-names = "ipg";
> > > > + power-domains = <&pd IMX_SC_R_AMIX>;
> > > > + dais = <&sai4>, <&sai5>;
> > > > + status = "disabled";
> > > > + };
> > > > +
> > > > + mqs: mqs at 59850000 {
> > > > + compatible = "fsl,imx8qm-mqs";
> > > > + reg = <0x59850000 0x10000>;
> > > > + clocks = <&mqs0_lpcg 0>,
> > > > + <&mqs0_lpcg 1>;
> > > > + clock-names = "mclk", "core";
> > > > + power-domains = <&pd IMX_SC_R_MQS_0>;
> > > > + status = "disabled";
> > > > + };
> > > > +
> > > > + asrc0_lpcg: clock-controller at 59400000 {
> > >
> > > Please insert he lpcg nodes according to their address.
> > >
> > > > + compatible = "fsl,imx8qxp-lpcg";
> > > > + reg = <0x59400000 0x10000>;
> > > > + #clock-cells = <1>;
> > > > + clocks = <&audio_ipg_clk>;
> > > > + clock-indices = <IMX_LPCG_CLK_4>;
> > > > + clock-output-names = "asrc0_lpcg_ipg_clk";
> > > > + power-domains = <&pd IMX_SC_R_ASRC_0>;
> > > > + };
> > > > +
> > > > + esai0_lpcg: clock-controller at 59410000 {
> > > > + compatible = "fsl,imx8qxp-lpcg";
> > > > + reg = <0x59410000 0x10000>;
> > > > + #clock-cells = <1>;
> > > > + clocks = <&acm IMX_ADMA_ACM_ESAI0_MCLK_SEL>,
> > > > + <&audio_ipg_clk>;
> > > > + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
> > > > + clock-output-names = "esai0_lpcg_extal_clk",
> > > > + "esai0_lpcg_ipg_clk";
> > > > + power-domains = <&pd IMX_SC_R_ESAI_0>;
> > > > + };
> > > > +
> > > > + spdif0_lpcg: clock-controller at 59420000 {
> > > > + compatible = "fsl,imx8qxp-lpcg";
> > > > + reg = <0x59420000 0x10000>;
> > > > + #clock-cells = <1>;
> > > > + clocks = <&acm IMX_ADMA_ACM_SPDIF0_TX_CLK_SEL>,
> > > > + <&audio_ipg_clk>;
> > > > + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
> > > > + clock-output-names = "spdif0_lpcg_tx_clk",
> > > > + "spdif0_lpcg_gclkw";
> > > > + power-domains = <&pd IMX_SC_R_SPDIF_0>;
> > > > + };
> > > > +
> > > > + spdif1_lpcg: clock-controller at 59430000 {
> > >
> > > That's imx8qm only as well, no?
> > >
> > > Thanks and best regards,
> > > Alexander
> > >
> > > > + compatible = "fsl,imx8qxp-lpcg";
> > > > + reg = <0x59430000 0x10000>;
> > > > + #clock-cells = <1>;
> > > > + clocks = <&acm IMX_ADMA_ACM_SPDIF1_TX_CLK_SEL>,
> > > > + <&audio_ipg_clk>;
> > > > + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
> > > > + clock-output-names = "spdif1_lpcg_tx_clk",
> > > > + "spdif1_lpcg_gclkw";
> > > > + power-domains = <&pd IMX_SC_R_SPDIF_1>;
> > > > + status = "disabled";
> > > > + };
> > > > +
> > > > + asrc1_lpcg: clock-controller at 59c00000 {
> > > > + compatible = "fsl,imx8qxp-lpcg";
> > > > + reg = <0x59c00000 0x10000>;
> > > > + #clock-cells = <1>;
> > > > + clocks = <&audio_ipg_clk>;
> > > > + clock-indices = <IMX_LPCG_CLK_4>;
> > > > + clock-output-names = "asrc1_lpcg_ipg_clk";
> > > > + power-domains = <&pd IMX_SC_R_ASRC_1>;
> > > > + };
> > > > +
> > > > + sai4_lpcg: clock-controller at 59c20000 {
> > > > + compatible = "fsl,imx8qxp-lpcg";
> > > > + reg = <0x59c20000 0x10000>;
> > > > + #clock-cells = <1>;
> > > > + clocks = <&acm IMX_ADMA_ACM_SAI4_MCLK_SEL>,
> > > > + <&audio_ipg_clk>;
> > > > + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
> > > > + clock-output-names = "sai4_lpcg_mclk",
> > > > + "sai4_lpcg_ipg_clk";
> > > > + power-domains = <&pd IMX_SC_R_SAI_4>;
> > > > + };
> > > > +
> > > > + sai5_lpcg: clock-controller at 59c30000 {
> > > > + compatible = "fsl,imx8qxp-lpcg";
> > > > + reg = <0x59c30000 0x10000>;
> > > > + #clock-cells = <1>;
> > > > + clocks = <&acm IMX_ADMA_ACM_SAI5_MCLK_SEL>,
> > > > + <&audio_ipg_clk>;
> > > > + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
> > > > + clock-output-names = "sai5_lpcg_mclk",
> > > > + "sai5_lpcg_ipg_clk";
> > > > + power-domains = <&pd IMX_SC_R_SAI_5>;
> > > > + };
> > > > +
> > > > + amix_lpcg: clock-controller at 59c40000 {
> > > > + compatible = "fsl,imx8qxp-lpcg";
> > > > + reg = <0x59c40000 0x10000>;
> > > > + #clock-cells = <1>;
> > > > + clocks = <&audio_ipg_clk>;
> > > > + clock-indices = <IMX_LPCG_CLK_0>;
> > > > + clock-output-names = "amix_lpcg_ipg_clk";
> > > > + power-domains = <&pd IMX_SC_R_AMIX>;
> > > > + };
> > > > +
> > > > + mqs0_lpcg: clock-controller at 59c50000 {
> > > > + compatible = "fsl,imx8qxp-lpcg";
> > > > + reg = <0x59c50000 0x10000>;
> > > > + #clock-cells = <1>;
> > > > + clocks = <&acm IMX_ADMA_ACM_MQS_TX_CLK_SEL>,
> > > > + <&audio_ipg_clk>;
> > > > + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
> > > > + clock-output-names = "mqs0_lpcg_mclk",
> > > > + "mqs0_lpcg_ipg_clk";
> > > > + power-domains = <&pd IMX_SC_R_MQS_0>;
> > > > + };
> > > > };
> > > >
> > > >
> > >
> > >
> >
> >
>
>
> --
> TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
> Amtsgericht München, HRB 105018
> Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
> http://www.tq-group.com/
>
>
More information about the linux-arm-kernel
mailing list