[PATCH net-next 2/2] net: stmmac: dwmac-imx: add support for PHY WOL

[Florian Fainelli]

On 3/6/24 09:24, Catalin Popescu wrote:
> Add support for PHY WOL capability into dwmac-imx MAC driver.
> This is required to enable WOL feature on a platform where MAC
> WOL capability is not sufficient and WOL capability built into
> the PHY is actually needed.
> 
> Signed-off-by: Catalin Popescu <catalin.popescu at leica-geosystems.com>

Nope, this is not about how to do this. You use a Device Tree property 
as a policy rather than properly describe your systems capabilities.

What sort of Wake-on-LAN do you want to be done by the PHY exactly? Does 
the PHY have packet matching capabilities, or do you want to wake-up 
from a PHY event like link up/down/any interrupt?

If the former, then you would need to interrogate the PHY driver via 
phy_ethtool_get_wol() to figure out what Wake-on-LAN modes it is capable 
of supporting and then make a decision whether to prioritize Wake-on-LAN 
from the PHY or the MAC, or maybe only the PHY can actually wake-up the 
system in your case.

If the latter, then you need to add support for WAKE_PHY to the stmmac
driver.

pw-bot: cr
-- 
Florian