[PATCH 1/2] dt-bindings: firmware: arm,scmi: introduce property mbox-rx-timeout-ms

[Peng Fan]

> Subject: Re: [PATCH 1/2] dt-bindings: firmware: arm,scmi: introduce
> property mbox-rx-timeout-ms
> 
> On Fri, Jun 21, 2024 at 08:46:57PM +0800, Peng Fan (OSS) wrote:
> > From: Peng Fan <peng.fan at nxp.com>
> >
> > System Controller Management Interface(SCMI) firmwares might
> have
> > different designs by SCMI firmware developers. So the maximum
> receive
> > channel timeout value might also varies in the various designs.
> >
> > So introduce property mbox-rx-timeout-ms to let each platform could
> > set its own timeout value in device tree.
> >
> > Signed-off-by: Peng Fan <peng.fan at nxp.com>
> > ---
> >  Documentation/devicetree/bindings/firmware/arm,scmi.yaml | 6
> ++++++
> >  1 file changed, 6 insertions(+)
> >
> > diff --git
> a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
> > b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
> > index 4d823f3b1f0e..d6cc2bf4c819 100644
> > --- a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
> > +++ b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
> > @@ -121,6 +121,12 @@ properties:
> >        atomic mode of operation, even if requested.
> >      default: 0
> >
> > +  max-rx-timeout-ms:
> > +    description:
> > +      An optional time value, expressed in milliseconds, representing,
> on this
> > +      platform, the mailbox maximum timeout value for receive
> channel.
> 
> "on this platform"? Doesn't every property apply to the given platform?

Yeah, apply to all the use mailbox.

> 
> > +    default: 0
> 
> 0 means no timeout or response is instant?

I should use 30ms same as what the driver currently use.

Thanks,
Peng.

> 
> > +
> >    arm,smc-id:
> >      $ref: /schemas/types.yaml#/definitions/uint32
> >      description:
> >
> > --
> > 2.37.1
> >