[PATCH 3/7] arm64: dts: imx95-19x19-evk: Add audio related nodes
Frank Li
Frank.Li at nxp.com
Thu Jun 27 14:59:57 PDT 2024
Add sai1, sai2. Add i2c4 and wm8962 and other dependent nodes.
Signed-off-by: Frank Li <Frank.Li at nxp.com>
---
.../boot/dts/freescale/imx95-19x19-evk.dts | 238 ++++++++++++++++++
1 file changed, 238 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
index d14a54ab4fd47..660e623f4f964 100644
--- a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
@@ -17,6 +17,11 @@ aliases {
serial0 = &lpuart1;
};
+ bt_sco_codec: audio-codec-bt-sco {
+ #sound-dai-cells = <1>;
+ compatible = "linux,bt-sco";
+ };
+
chosen {
stdout-path = &lpuart1;
};
@@ -40,6 +45,34 @@ linux_cma: linux,cma {
};
};
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "+V3.3_SW";
+ };
+
+ reg_audio_pwr: regulator-audio-pwr {
+ compatible = "regulator-fixed";
+ regulator-name = "audio-pwr";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&i2c4_gpio_expander_21 1 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ };
+
+ reg_audio_slot: regulator-audio-slot {
+ compatible = "regulator-fixed";
+ regulator-name = "audio-wm8962";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&i2c4_gpio_expander_21 7 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ status = "disabled";
+ };
+
reg_m2_pwr: regulator-m2-pwr {
compatible = "regulator-fixed";
regulator-name = "M.2-power";
@@ -79,6 +112,97 @@ reg_usdhc2_vmmc: regulator-usdhc2 {
enable-active-high;
off-on-delay-us = <12000>;
};
+
+ sound-bt-sco {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "bt-sco-audio";
+ simple-audio-card,format = "dsp_a";
+ simple-audio-card,bitclock-inversion;
+ simple-audio-card,frame-master = <&btcpu>;
+ simple-audio-card,bitclock-master = <&btcpu>;
+
+ btcpu: simple-audio-card,cpu {
+ sound-dai = <&sai1>;
+ dai-tdm-slot-num = <2>;
+ dai-tdm-slot-width = <16>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&bt_sco_codec 1>;
+ };
+ };
+
+ sound-micfil {
+ compatible = "fsl,imx-audio-card";
+ model = "micfil-audio";
+
+ pri-dai-link {
+ link-name = "micfil hifi";
+ format = "i2s";
+ cpu {
+ sound-dai = <&micfil>;
+ };
+ };
+ };
+
+ sound-wm8962 {
+ compatible = "fsl,imx-audio-wm8962";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hp>;
+ model = "wm8962-audio";
+ audio-cpu = <&sai3>;
+ audio-codec = <&wm8962>;
+ hp-det-gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+ audio-routing = "Headphone Jack", "HPOUTL",
+ "Headphone Jack", "HPOUTR",
+ "Ext Spk", "SPKOUTL",
+ "Ext Spk", "SPKOUTR",
+ "AMIC", "MICBIAS",
+ "IN3R", "AMIC",
+ "IN1R", "AMIC";
+ };
+};
+
+&lpi2c4 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lpi2c4>;
+ status = "okay";
+
+ wm8962: audio-codec at 1a {
+ compatible = "wlf,wm8962";
+ reg = <0x1a>;
+ clocks = <&scmi_clk IMX95_CLK_SAI3>;
+ DCVDD-supply = <®_audio_pwr>;
+ DBVDD-supply = <®_audio_pwr>;
+ AVDD-supply = <®_audio_pwr>;
+ CPVDD-supply = <®_audio_pwr>;
+ MICVDD-supply = <®_audio_pwr>;
+ PLLVDD-supply = <®_audio_pwr>;
+ SPKVDD1-supply = <®_audio_pwr>;
+ SPKVDD2-supply = <®_audio_pwr>;
+ gpio-cfg = < 0x0000 /* 0:Default */
+ 0x0000 /* 1:Default */
+ 0x0000 /* 2:FN_DMICCLK */
+ 0x0000 /* 3:Default */
+ 0x0000 /* 4:FN_DMICCDAT */
+ 0x0000 /* 5:Default */
+ >;
+ };
+
+ i2c4_gpio_expander_21: gpio at 21 {
+ compatible = "nxp,pcal6408";
+ reg = <0x21>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c4_pcal6408>;
+ vcc-supply = <®_3p3v>;
+ };
};
&lpi2c7 {
@@ -108,6 +232,23 @@ &lpuart1 {
status = "okay";
};
+&micfil {
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pdm>;
+ assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>,
+ <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>,
+ <&scmi_clk IMX95_CLK_AUDIOPLL1>,
+ <&scmi_clk IMX95_CLK_AUDIOPLL2>,
+ <&scmi_clk IMX95_CLK_PDM>;
+ assigned-clock-parents = <0>, <0>, <0>, <0>,
+ <&scmi_clk IMX95_CLK_AUDIOPLL1>;
+ assigned-clock-rates = <3932160000>,
+ <3612672000>, <393216000>,
+ <361267200>, <49152000>;
+ status = "okay";
+};
+
&mu7 {
status = "okay";
};
@@ -128,6 +269,42 @@ &pcie1 {
status = "okay";
};
+&sai1 {
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai1>;
+ assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>,
+ <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>,
+ <&scmi_clk IMX95_CLK_AUDIOPLL1>,
+ <&scmi_clk IMX95_CLK_AUDIOPLL2>,
+ <&scmi_clk IMX95_CLK_SAI1>;
+ assigned-clock-parents = <0>, <0>, <0>, <0>,
+ <&scmi_clk IMX95_CLK_AUDIOPLL1>;
+ assigned-clock-rates = <3932160000>,
+ <3612672000>, <393216000>,
+ <361267200>, <12288000>;
+ fsl,sai-mclk-direction-output;
+ status = "okay";
+};
+
+&sai3 {
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai3>;
+ assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>,
+ <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>,
+ <&scmi_clk IMX95_CLK_AUDIOPLL1>,
+ <&scmi_clk IMX95_CLK_AUDIOPLL2>,
+ <&scmi_clk IMX95_CLK_SAI3>;
+ assigned-clock-parents = <0>, <0>, <0>, <0>,
+ <&scmi_clk IMX95_CLK_AUDIOPLL1>;
+ assigned-clock-rates = <3932160000>,
+ <3612672000>, <393216000>,
+ <361267200>, <12288000>;
+ fsl,sai-mclk-direction-output;
+ status = "okay";
+};
+
&usdhc1 {
pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
pinctrl-0 = <&pinctrl_usdhc1>;
@@ -159,12 +336,31 @@ &wdog3 {
};
&scmi_iomuxc {
+ pinctrl_hp: hpgrp {
+ fsl,pins = <
+ IMX95_PAD_GPIO_IO11__GPIO2_IO_BIT11 0x31e
+ >;
+ };
+
+ pinctrl_i2c4_pcal6408: i2c4pcal6498grp {
+ fsl,pins = <
+ IMX95_PAD_GPIO_IO18__GPIO2_IO_BIT18 0x31e
+ >;
+ };
+
pinctrl_i2c7_pcal6524: i2c7pcal6524grp {
fsl,pins = <
IMX95_PAD_GPIO_IO36__GPIO5_IO_BIT16 0x31e
>;
};
+ pinctrl_lpi2c4: lpi2c4grp {
+ fsl,pins = <
+ IMX95_PAD_GPIO_IO30__LPI2C4_SDA 0x40000b9e
+ IMX95_PAD_GPIO_IO31__LPI2C4_SCL 0x40000b9e
+ >;
+ };
+
pinctrl_lpi2c7: lpi2c7grp {
fsl,pins = <
IMX95_PAD_GPIO_IO08__LPI2C7_SDA 0x40000b9e
@@ -184,6 +380,48 @@ IMX95_PAD_GPIO_IO35__HSIOMIX_TOP_PCIE2_CLKREQ_B 0x4000031e
>;
};
+ pinctrl_pdm: pdmgrp {
+ fsl,pins = <
+ IMX95_PAD_PDM_CLK__AONMIX_TOP_PDM_CLK 0x31e
+ IMX95_PAD_PDM_BIT_STREAM0__AONMIX_TOP_PDM_BIT_STREAM_BIT0 0x31e
+ >;
+ };
+
+ pinctrl_sai1: sai1grp {
+ fsl,pins = <
+ IMX95_PAD_SAI1_RXD0__AONMIX_TOP_SAI1_RX_DATA_BIT0 0x31e
+ IMX95_PAD_SAI1_TXC__AONMIX_TOP_SAI1_TX_BCLK 0x31e
+ IMX95_PAD_SAI1_TXFS__AONMIX_TOP_SAI1_TX_SYNC 0x31e
+ IMX95_PAD_SAI1_TXD0__AONMIX_TOP_SAI1_TX_DATA_BIT0 0x31e
+ >;
+ };
+
+ pinctrl_sai2: sai2grp {
+ fsl,pins = <
+ IMX95_PAD_ENET2_MDIO__NETCMIX_TOP_SAI2_RX_BCLK 0x31e
+ IMX95_PAD_ENET2_MDC__NETCMIX_TOP_SAI2_RX_SYNC 0x31e
+ IMX95_PAD_ENET2_TD3__NETCMIX_TOP_SAI2_RX_DATA_BIT0 0x31e
+ IMX95_PAD_ENET2_TD2__NETCMIX_TOP_SAI2_RX_DATA_BIT1 0x31e
+ IMX95_PAD_ENET2_TXC__NETCMIX_TOP_SAI2_TX_BCLK 0x31e
+ IMX95_PAD_ENET2_TX_CTL__NETCMIX_TOP_SAI2_TX_SYNC 0x31e
+ IMX95_PAD_ENET2_RX_CTL__NETCMIX_TOP_SAI2_TX_DATA_BIT0 0x31e
+ IMX95_PAD_ENET2_RXC__NETCMIX_TOP_SAI2_TX_DATA_BIT1 0x31e
+ IMX95_PAD_ENET2_RD0__NETCMIX_TOP_SAI2_TX_DATA_BIT2 0x31e
+ IMX95_PAD_ENET2_RD1__NETCMIX_TOP_SAI2_TX_DATA_BIT3 0x31e
+ IMX95_PAD_ENET2_RD2__NETCMIX_TOP_SAI2_MCLK 0x31e
+ >;
+ };
+
+ pinctrl_sai3: sai3grp {
+ fsl,pins = <
+ IMX95_PAD_GPIO_IO17__SAI3_MCLK 0x31e
+ IMX95_PAD_GPIO_IO16__SAI3_TX_BCLK 0x31e
+ IMX95_PAD_GPIO_IO26__SAI3_TX_SYNC 0x31e
+ IMX95_PAD_GPIO_IO20__SAI3_RX_DATA_BIT0 0x31e
+ IMX95_PAD_GPIO_IO21__SAI3_TX_DATA_BIT0 0x31e
+ >;
+ };
+
pinctrl_uart1: uart1grp {
fsl,pins = <
IMX95_PAD_UART1_RXD__AONMIX_TOP_LPUART1_RX 0x31e
--
2.34.1
More information about the linux-arm-kernel
mailing list