[PATCH v5 7/7] dts: ti: k3-am625-beagleplay: Add mikroBUS

[Ayush Singh]

On 6/27/24 22:12, Nishanth Menon wrote:

> On 21:56-20240627, Ayush Singh wrote:
>> DONOTMERGE
> ^^ might be better off in the diffstat and explain why DONOT MERGE :)
> [...]

There are 2 reasons for DONOTMERGE

1. Mikrobus boards config should not live here. It is supposed to be 
independent of the system and arch.

2. I am going to be cleaning up and sending this once at least the 
dt-bindings are approved.


I have included it in the patch to provide some idea about how it will 
supposedly look like (and anyone who might want to test this stuff). I 
will try to remember to add it in diffstat in the future.

>> +	mikrobus_spi_pins_gpio: mikrobus-spi-gpio-pins {
>> +		pinctrl-single,pins = <
>> +			AM62X_IOPAD(0x0194, PIN_INPUT, 7) /* (B19) MCASP0_AXR3.GPIO1_7 */
>> +			AM62X_IOPAD(0x0198, PIN_INPUT, 7) /* (A19) MCASP0_AXR2.GPIO1_8 */
>> +			AM62X_IOPAD(0x01ac, PIN_INPUT, 7) /* (E19) MCASP0_AFSR.GPIO1_13 */
>> +			AM62X_IOPAD(0x01b0, PIN_INPUT, 7) /* (A20) MCASP0_ACLKR.GPIO1_14 */
>> +		>;
>> +	};
> we could potentially get rid of these if we get the gpio-ranges correct
> on pinctrl? I have not gotten around to am62x yet - but see this:
>
> https://lore.kernel.org/linux-arm-kernel/20240627162539.691223-1-nm@ti.com/T/#t
>
> [...]


Thanks. Will look into this before sending an actual patch for 
beagleplay dts as well.


Ayush Singh