[PATCH 0/3] Series DTs to deliver Ethernet for STM32MP13

[Alexandre TORGUE]

Hi

On 6/10/24 10:03, Christophe Roullier wrote:
> STM32MP13 is STM32 SOC with 2 GMACs instances
>      GMAC IP version is SNPS 4.20.
>      GMAC IP configure with 1 RX and 1 TX queue.
>      DMA HW capability register supported
>      RX Checksum Offload Engine supported
>      TX Checksum insertion supported
>      Wake-Up On Lan supported
>      TSO supported
> 
> Christophe Roullier (3):
>    ARM: dts: stm32: add ethernet1 and ethernet2 support on stm32mp13
>    ARM: dts: stm32: add ethernet1/2 RMII pins for STM32MP13F-DK board
>    ARM: dts: stm32: add ethernet1 for STM32MP135F-DK board
> 
>   arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi | 71 +++++++++++++++++++++
>   arch/arm/boot/dts/st/stm32mp131.dtsi        | 38 +++++++++++
>   arch/arm/boot/dts/st/stm32mp133.dtsi        | 31 +++++++++
>   arch/arm/boot/dts/st/stm32mp135f-dk.dts     | 23 +++++++
>   4 files changed, 163 insertions(+)
> 
> 
> base-commit: 28f961f9d5b7c3d9b9f93cc59e54477ba1278cf9

Series applied on stm32-next.

regards
Alex