Aw: [PATCH v3 1/2] arm64: dts: mt7986: add dtbs with applied overlays for bpi-r3

[AngeloGioacchino Del Regno]

Il 26/06/24 22:45, Frank Wunderlich ha scritto:
> any suggestions? hoping it does no laying around so long as v2
> 

So you're trying to just test that the overlay is valid and can actually be
overlaid to the base dts?

I'm not sure that this is the right/best way... and I honestly have no time
to check that *exactly right now*, even though that should be.

I have to be convinced of what I'm doing before applying patches, and I know
that this was sent a bit of time ago, but I really didn't have any time to
dig into that... let's see if for some miracle I can do that for this cycle
otherwise it's going to be the next one.

I mean no disrespect to Rob who suggested this change, but I still want to
check that on my own before picking it.

Sorry about the delays

Cheers,
Angelo


> regards Frank
> 
> 
>> Gesendet: Samstag, 08. Juni 2024 um 10:05 Uhr
>> Von: "Frank Wunderlich" <linux at fw-web.de>
>> An: "Matthias Brugger" <matthias.bgg at gmail.com>, "AngeloGioacchino Del Regno" <angelogioacchino.delregno at collabora.com>, "Rob Herring" <robh at kernel.org>, "Krzysztof Kozlowski" <krzk+dt at kernel.org>, "Conor Dooley" <conor+dt at kernel.org>
>> Cc: "Frank Wunderlich" <frank-w at public-files.de>, linux-kernel at vger.kernel.org, linux-arm-kernel at lists.infradead.org, linux-mediatek at lists.infradead.org, devicetree at vger.kernel.org, "Daniel Golle" <daniel at makrotopia.org>, "Rob Herring" <robh+dt at kernel.org>
>> Betreff: [PATCH v3 1/2] arm64: dts: mt7986: add dtbs with applied overlays for bpi-r3
>>
>> From: Frank Wunderlich <frank-w at public-files.de>
>>
>> Build devicetree binaries for testing overlays and providing users
>> full dtb without using overlays.
>>
>> Suggested-by: Rob Herring <robh+dt at kernel.org>
>> Signed-off-by: Frank Wunderlich <frank-w at public-files.de>
>> ---
>> https://lore.kernel.org/all/CAL_JsqK_3xxD0DFwipXO85P=q=EYjUdjE1_8g1MKtvw3vVzx5A@mail.gmail.com/
>> https://lore.kernel.org/all/CAL_JsqJSi=kJSix=f3787ULZnaCy_Y26Phdhy5y9fat_vkDuUw@mail.gmail.com/
>>
>> v2:
>> make full dtbs multiline for better readability
>> ---
>>   arch/arm64/boot/dts/mediatek/Makefile | 21 +++++++++++++++++++++
>>   1 file changed, 21 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
>> index 37b4ca3a87c9..0ec5b904d35d 100644
>> --- a/arch/arm64/boot/dts/mediatek/Makefile
>> +++ b/arch/arm64/boot/dts/mediatek/Makefile
>> @@ -15,6 +15,27 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-emmc.dtbo
>>   dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-nand.dtbo
>>   dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-nor.dtbo
>>   dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-sd.dtbo
>> +mt7986a-bananapi-bpi-r3-emmc-nand-dtbs := \
>> +	mt7986a-bananapi-bpi-r3.dtb \
>> +	mt7986a-bananapi-bpi-r3-emmc.dtbo \
>> +	mt7986a-bananapi-bpi-r3-nand.dtbo
>> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-emmc-nand.dtb
>> +mt7986a-bananapi-bpi-r3-emmc-nor-dtbs := \
>> +	mt7986a-bananapi-bpi-r3.dtb \
>> +	mt7986a-bananapi-bpi-r3-emmc.dtbo \
>> +	mt7986a-bananapi-bpi-r3-nor.dtbo
>> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-emmc-nor.dtb
>> +mt7986a-bananapi-bpi-r3-sd-nand-dtbs := \
>> +	mt7986a-bananapi-bpi-r3.dtb \
>> +	mt7986a-bananapi-bpi-r3-sd.dtbo \
>> +	mt7986a-bananapi-bpi-r3-nand.dtbo
>> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-sd-nand.dtb
>> +mt7986a-bananapi-bpi-r3-sd-nor-dtbs := \
>> +	mt7986a-bananapi-bpi-r3.dtb \
>> +	mt7986a-bananapi-bpi-r3-sd.dtbo \
>> +	mt7986a-bananapi-bpi-r3-nor.dtbo
>> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-sd-nor.dtb
>> +
>>   dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-rfb.dtb
>>   dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986b-rfb.dtb
>>   dtb-$(CONFIG_ARCH_MEDIATEK) += mt7988a-bananapi-bpi-r4.dtb
>> --
>> 2.34.1
>>
>>