[RFT][PATCH 1/2] arm64: dts: ti: k3-am62p5-sk: fix graph_child_address warnings

[Dhruva Gole]

Fix the following warnings that are thrown when building dtbs with W=1:

../arch/arm64/boot/dts/ti/k3-am62p5-sk.dts:367.10-376.6: Warning (graph_child_address): /bus at f0000/i2c at 20000000/usb-power-controller at 3f/connector/ports: graph node has single child node 'port at 0', #address-cells/#size-cells are not necessary
../arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi:647.22-657.5: Warning (graph_child_address): /bus at f0000/usb at f900000/usb at 31000000: graph node has single child node 'port at 0', #address-cells/#size-cells are not necessary
  also defined at ../arch/arm64/boot/dts/ti/k3-am62p5-sk.dts:517.7-528.3

Cc: Roger Quadros <rogerq at kernel.org>
Signed-off-by: Dhruva Gole <d-gole at ti.com>
---
 arch/arm64/boot/dts/ti/k3-am62p5-sk.dts | 16 ++++------------
 1 file changed, 4 insertions(+), 12 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
index fb980d46e304..ff65955551a3 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
@@ -364,14 +364,9 @@ connector {
 			self-powered;
 			data-role = "dual";
 			power-role = "sink";
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				port at 0 {
-					reg = <0>;
-					usb_con_hs: endpoint {
-						remote-endpoint = <&usb0_hs_ep>;
-					};
+			port {
+				usb_con_hs: endpoint {
+				remote-endpoint = <&usb0_hs_ep>;
 				};
 			};
 		};
@@ -516,11 +511,8 @@ &usbss1 {
 
 &usb0 {
 	usb-role-switch;
-	#address-cells = <1>;
-	#size-cells = <0>;
 
-	port at 0 {
-		reg = <0>;
+	port {
 		usb0_hs_ep: endpoint {
 			remote-endpoint = <&usb_con_hs>;
 		};
-- 
2.34.1