[PATCH V4 5/7] clk: qcom: Add NSS clock Controller driver for IPQ9574

[Andrew Lunn]

> +static struct clk_alpha_pll ubi32_pll_main = {
> +	.offset = 0x28000,
> +	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_NSS_HUAYRA],
> +	.flags = SUPPORTS_DYNAMIC_UPDATE,
> +	.clkr = {
> +		.hw.init = &(const struct clk_init_data) {
> +			.name = "ubi32_pll_main",
> +			.parent_data = &(const struct clk_parent_data) {
> +				.index = DT_XO,
> +			},
> +			.num_parents = 1,
> +			.ops = &clk_alpha_pll_huayra_ops,
> +		},
> +	},
> +};
> +
> +static struct clk_alpha_pll_postdiv ubi32_pll = {
> +	.offset = 0x28000,
> +	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_NSS_HUAYRA],
> +	.width = 2,
> +	.clkr.hw.init = &(const struct clk_init_data) {
> +		.name = "ubi32_pll",
> +		.parent_hws = (const struct clk_hw *[]) {
> +			&ubi32_pll_main.clkr.hw
> +		},
> +		.num_parents = 1,
> +		.ops = &clk_alpha_pll_postdiv_ro_ops,
> +		.flags = CLK_SET_RATE_PARENT,
> +	},
> +};

Can these structures be made const? You have quite a few different
structures in this driver, some of which are const, and some which are
not.

	Andrew