[PATCH V4 4/7] dt-bindings: clock: Add ipq9574 NSSCC clock and reset definitions

[Rob Herring (Arm)]

On Tue, 25 Jun 2024 12:35:33 +0530, Devi Priya wrote:
> Add NSSCC clock and reset definitions for ipq9574.
> 
> Signed-off-by: Devi Priya <quic_devipriy at quicinc.com>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
> ---
>  Changes in V4:
> 	- Added GCC_NSSCC_CLK source to the clocks
> 	- Added support for interconnects and interconnect-names as the NoC
> 	  clocks are being enabled via interconnect.
> 
>  .../bindings/clock/qcom,ipq9574-nsscc.yaml    |  75 +++++++++
>  .../dt-bindings/clock/qcom,ipq9574-nsscc.h    | 152 ++++++++++++++++++
>  .../dt-bindings/reset/qcom,ipq9574-nsscc.h    | 134 +++++++++++++++
>  3 files changed, 361 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/qcom,ipq9574-nsscc.yaml
>  create mode 100644 include/dt-bindings/clock/qcom,ipq9574-nsscc.h
>  create mode 100644 include/dt-bindings/reset/qcom,ipq9574-nsscc.h
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Error: Documentation/devicetree/bindings/clock/qcom,ipq9574-nsscc.example.dts:26.26-27 syntax error
FATAL ERROR: Unable to parse input tree
make[2]: *** [scripts/Makefile.lib:427: Documentation/devicetree/bindings/clock/qcom,ipq9574-nsscc.example.dtb] Error 1
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [/builds/robherring/dt-review-ci/linux/Makefile:1430: dt_binding_check] Error 2
make: *** [Makefile:240: __sub-make] Error 2

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240625070536.3043630-5-quic_devipriy@quicinc.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.