[EXT] Re: [PATCH v3 2/5] dt-bindings: arm: fsl: add imx-se-fw binding doc
Pankaj Gupta
pankaj.gupta at nxp.com
Mon Jun 24 06:12:22 PDT 2024
Hi Conor,
> > > +properties:
> > > + $nodename:
> > > + pattern: "^[0-9a-z]*-if@[0-9a-f]+$"
> >
> > Just "firmware@<hex>" please.
> >
Modified as per your suggestion,
- pattern: "^[0-9a-z]*-if@[0-9a-f]+$"
+ pattern: "^[0-9a-z]*-if@<hex>"
encountering the following error:
/home/yuktilab/linux_bkp/Documentation/devicetree/bindings/firmware/fsl,imx-se.example.dtb: ele-if at 0: $nodename:0: 'ele-if at 0' does not match '^[0-9a-z]*-if@<hex>'
from schema $id: http://devicetree.org/schemas/firmware/fsl,imx-se.yaml#
/home/yuktilab/linux_bkp/Documentation/devicetree/bindings/firmware/fsl,imx-se.example.dtb: v2x-if at 3: $nodename:0: 'v2x-if at 3' does not match '^[0-9a-z]*-if@<hex>'
from schema $id: http://devicetree.org/schemas/firmware/fsl,imx-se.yaml#
/home/yuktilab/linux_bkp/Documentation/devicetree/bindings/firmware/fsl,imx-se.example.dtb: v2x-if at 4: $nodename:0: 'v2x-if at 4' does not match '^[0-9a-z]*-if@<hex>'
from schema $id: http://devicetree.org/schemas/firmware/fsl,imx-se.yaml#
/home/yuktilab/linux_bkp/Documentation/devicetree/bindings/firmware/fsl,imx-se.example.dtb: v2x-if at 5: $nodename:0: 'v2x-if at 5' does not match '^[0-9a-z]*-if@<hex>'
from schema $id: http://devicetree.org/schemas/firmware/fsl,imx-se.yaml#
Please help and guide to resolve this comment, correctly.
Highly appreciated. Thanks.
Regards
Pankaj
> -----Original Message-----
> From: Pankaj Gupta
> Sent: Tuesday, June 18, 2024 4:29 PM
> To: Conor Dooley <conor at kernel.org>
> Cc: Jonathan Corbet <corbet at lwn.net>; Rob Herring <robh at kernel.org>;
> Krzysztof Kozlowski <krzk+dt at kernel.org>; Conor Dooley
> <conor+dt at kernel.org>; Shawn Guo <shawnguo at kernel.org>; Sascha Hauer
> <s.hauer at pengutronix.de>; Pengutronix Kernel Team
> <kernel at pengutronix.de>; Fabio Estevam <festevam at gmail.com>; Rob
> Herring <robh+dt at kernel.org>; Krzysztof Kozlowski
> <krzysztof.kozlowski+dt at linaro.org>; linux-doc at vger.kernel.org; linux-
> kernel at vger.kernel.org; devicetree at vger.kernel.org; imx at lists.linux.dev;
> linux-arm-kernel at lists.infradead.org
> Subject: RE: [EXT] Re: [PATCH v3 2/5] dt-bindings: arm: fsl: add imx-se-fw
> binding doc
>
>
>
> > -----Original Message-----
> > From: Conor Dooley <conor at kernel.org>
> > Sent: Monday, June 17, 2024 10:07 PM
> > To: Pankaj Gupta <pankaj.gupta at nxp.com>
> > Cc: Jonathan Corbet <corbet at lwn.net>; Rob Herring <robh at kernel.org>;
> > Krzysztof Kozlowski <krzk+dt at kernel.org>; Conor Dooley
> > <conor+dt at kernel.org>; Shawn Guo <shawnguo at kernel.org>; Sascha Hauer
> > <s.hauer at pengutronix.de>; Pengutronix Kernel Team
> > <kernel at pengutronix.de>; Fabio Estevam <festevam at gmail.com>; Rob
> > Herring <robh+dt at kernel.org>; Krzysztof Kozlowski
> > <krzysztof.kozlowski+dt at linaro.org>; linux-doc at vger.kernel.org; linux-
> > kernel at vger.kernel.org; devicetree at vger.kernel.org;
> > imx at lists.linux.dev; linux-arm-kernel at lists.infradead.org
> > Subject: [EXT] Re: [PATCH v3 2/5] dt-bindings: arm: fsl: add imx-se-fw
> > binding doc
> >
> > On Mon, Jun 17, 2024 at 12:59:40PM +0530, Pankaj Gupta wrote:
> > > The NXP security hardware IP(s) like: i.MX EdgeLock Enclave, V2X
> > > etc., creates an embedded secure enclave within the SoC boundary to
> > > enable features like:
> > > - HSM
> > > - SHE
> > > - V2X
> > >
> > > Secure-Enclave(s) communication interface are typically via message
> > > unit, i.e., based on mailbox linux kernel driver. This driver
> > > enables communication ensuring well defined message sequence
> > > protocol between Application Core and enclave's firmware.
> > >
> > > Driver configures multiple misc-device on the MU, for multiple
> > > user-space applications, to be able to communicate over single MU.
> > >
> > > It exists on some i.MX processors. e.g. i.MX8ULP, i.MX93 etc.
> > >
> > > Signed-off-by: Pankaj Gupta <pankaj.gupta at nxp.com>
> > > ---
> > > .../devicetree/bindings/firmware/fsl,imx-se.yaml | 160
> > +++++++++++++++++++++
> > > 1 file changed, 160 insertions(+)
> > >
> > > diff --git
> > > a/Documentation/devicetree/bindings/firmware/fsl,imx-se.yaml
> > > b/Documentation/devicetree/bindings/firmware/fsl,imx-se.yaml
> > > new file mode 100644
> > > index 000000000000..60ad1c4a3dfa
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/firmware/fsl,imx-se.yaml
> > > @@ -0,0 +1,160 @@
> > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/firmware/fsl,imx-se.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: NXP i.MX HW Secure Enclave(s) EdgeLock Enclave
> > > +
> > > +maintainers:
> > > + - Pankaj Gupta <pankaj.gupta at nxp.com>
> > > +
> > > +description: |
> > > + NXP's SoC may contain one or multiple embedded secure-enclave HW
> > > + IP(s) like i.MX EdgeLock Enclave, V2X etc. These NXP's HW IP(s)
> > > + enables features like
> > > + - Hardware Security Module (HSM),
> > > + - Security Hardware Extension (SHE), and
> > > + - Vehicular to Anything (V2X)
> > > +
> > > + Communication interface to the secure-enclaves is based on the
> > > + messaging unit(s).
> > > +
> > > +properties:
> > > + $nodename:
> > > + pattern: "^[0-9a-z]*-if@[0-9a-f]+$"
> >
> > Just "firmware@<hex>" please.
> >
>
> Modified as per your suggestion,
> - pattern: "^[0-9a-z]*-if@[0-9a-f]+$"
> + pattern: "^[0-9a-z]*-if@<hex>"
>
> encountering the following error:
> /home/yuktilab/linux_bkp/Documentation/devicetree/bindings/firmware/fsl,i
> mx-se.example.dtb: ele-if at 0: $nodename:0: 'ele-if at 0' does not match '^[0-
> 9a-z]*-if@<hex>'
> from schema $id: http://devicetree.org/schemas/firmware/fsl,imx-
> se.yaml#
> /home/yuktilab/linux_bkp/Documentation/devicetree/bindings/firmware/fsl,i
> mx-se.example.dtb: v2x-if at 3: $nodename:0: 'v2x-if at 3' does not match '^[0-
> 9a-z]*-if@<hex>'
> from schema $id: http://devicetree.org/schemas/firmware/fsl,imx-
> se.yaml#
> /home/yuktilab/linux_bkp/Documentation/devicetree/bindings/firmware/fsl,i
> mx-se.example.dtb: v2x-if at 4: $nodename:0: 'v2x-if at 4' does not match '^[0-
> 9a-z]*-if@<hex>'
> from schema $id: http://devicetree.org/schemas/firmware/fsl,imx-
> se.yaml#
> /home/yuktilab/linux_bkp/Documentation/devicetree/bindings/firmware/fsl,i
> mx-se.example.dtb: v2x-if at 5: $nodename:0: 'v2x-if at 5' does not match '^[0-
> 9a-z]*-if@<hex>'
> from schema $id: http://devicetree.org/schemas/firmware/fsl,imx-
> se.yaml#
>
> Please help and guide to resolve this comment, correctly.
> Highly appreciated. Thanks.
>
> > > +
> > > + compatible:
> > > + enum:
> > > + - fsl,imx8ulp-se
> > > + - fsl,imx93-se
> > > + - fsl,imx95-se
> > > +
> > > + reg:
> > > + maxItems: 1
> > > + description: Identifier of the communication interface to secure-
> enclave.
> > > +
> > > + mboxes:
> > > + description: contain a list of phandles to mailboxes.
> > > + items:
> > > + - description: Specify the mailbox used to send message to se
> firmware
> > > + - description: Specify the mailbox used to receive message
> > > + from se firmware
> > > +
> > > + mbox-names:
> > > + items:
> > > + - const: tx
> > > + - const: rx
> > > + - const: txdb
> > > + - const: rxdb
> > > + minItems: 2
> > > +
> > > + memory-region:
> > > + description: contains a list of phandles to reserved external memory.
> > > + items:
> > > + - description: It is used by secure-enclave firmware. It is an optional
> > > + property based on compatible and identifier to
> > > + communication
> > interface.
> > > + (see bindings/reserved-memory/reserved-memory.txt)
> > > +
> > > + sram:
> > > + description: contains a list of phandles to sram.
> >
> > There's only 1 phandle allowed, don't describe it as a list.
> > Same for memory-region.
>
> Accepted. Will do the following changes.
> memory-region:
> - description: contains a list of phandles to reserved external memory.
> + description: contains the phandle to reserved external memory.
>
> sram:
> - description: contains a list of phandles to sram.
> - $ref: /schemas/types.yaml#/definitions/phandle-array
> + description: contains the phandle to sram.
> items:
> >
> > > + $ref: /schemas/types.yaml#/definitions/phandle-array
> > > + items:
> > > + - description: Phandle to the device SRAM. It is an optional property
> > > + based on compatible and identifier to communication interface.
> > > +
> > > +allOf:
> > > + # memory-region
> > > + - if:
> > > + properties:
> > > + compatible:
> > > + contains:
> > > + enum:
> > > + - fsl,imx8ulp-se
> > > + - fsl,imx93-se
> > > + then:
> > > + required:
> > > + - memory-region
> >
> > > + else:
> > > + not:
> > > + required:
> > > + - memory-region
> >
> > Use
> >
> > else: properties: memory-region: false
> >
> > Same for sram.
> Accepted will be corrected in V4.
> # memory-region
> - not:
> - required:
> - - memory-region
> + properties:
> + memory-region: false
>
> # sram
> else:
> - not:
> - required:
> - - sram
> + properties:
> + sram: false
>
>
> > Sort the allOf after required.
> Accepted. Will move allOf after "additionalProperties:"
>
> >
> > > +
> > > + # sram
> > > + - if:
> > > + properties:
> > > + compatible:
> > > + contains:
> > > + enum:
> > > + - fsl,imx8ulp-se
> > > + then:
> > > + required:
> > > + - sram
> > > + else:
> > > + not:
> > > + required:
> > > + - sram
> > > +
> > > +required:
> > > + - compatible
> > > + - reg
> > > + - mboxes
> > > + - mbox-names
> > > +
> > > +additionalProperties: false
> > > +
> > > +examples:
> > > + - |
> > > + firmware {
> >
> > You've made up these firmware "buses" here, what purpose do they
> > serve, other than allowing you to have a reg property?
> True.
> Additionally, these are firmware nodes, these nodes are semantically put in
> firmware "buses".
>
> >
> > > + #address-cells = <1>;
> > > + #size-cells = <0>;
> > > + ele-if at 0 {
> > > + compatible = "fsl,imx8ulp-se";
> > > + reg = <0x0>;
> >
> > What does the reg property even do? Is it ever more than 0?
> > Can this information be provided as a mbox cell?
> Yes, there are more than 0 nodes for i.MX95 platforms, i.e., total of around 7
> such nodes.
> Reg property will help to identify the node id, by other kernel management
> layer like NVMEM (patches to follow).
>
> >
> > > + mboxes = <&s4muap 0 0>, <&s4muap 1 0>;
> > > + mbox-names = "tx", "rx";
> > > + sram = <&sram0>;
> > > + memory-region = <&ele_reserved>;
> > > + };
> > > + };
> > > + - |
> > > + firmware {
> >
> > These examples are all basically the same, drop all but one.
> Ok, will keep the example of i.MX95.
>
> >
> > Thanks,
> > Conor.
> >
> > > + #address-cells = <1>;
> > > + #size-cells = <0>;
> > > + ele-if at 0 {
> > > + compatible = "fsl,imx93-se";
> > > + reg = <0x0>;
> > > + mboxes = <&s4muap 0 0>, <&s4muap 1 0>;
> > > + mbox-names = "tx", "rx";
> > > + memory-region = <&ele_reserved>;
> > > + };
> > > + };
> > > + - |
> > > + firmware {
> > > + #address-cells = <1>;
> > > + #size-cells = <0>;
> > > + ele-if at 0 {
> > > + compatible = "fsl,imx95-se";
> > > + reg = <0x0>;
> > > + mboxes = <&ele_mu0 0 0>, <&ele_mu0 1 0>;
> > > + mbox-names = "tx", "rx";
> > > + };
> > > + v2x-if at 3 {
> > > + compatible = "fsl,imx95-se";
> > > + reg = <0x3>;
> > > + mboxes = <&v2x_mu 0 0>, <&v2x_mu 1 0>;
> > > + mbox-names = "tx", "rx";
> > > + };
> > > + v2x-if at 4 {
> > > + compatible = "fsl,imx95-se";
> > > + reg = <0x4>;
> > > + mboxes = <&v2x_mu6 0 0>, <&v2x_mu6 1 0>;
> > > + mbox-names = "tx", "rx";
> > > + };
> > > + v2x-if at 5 {
> > > + compatible = "fsl,imx95-se";
> > > + reg = <0x5>;
> > > + mboxes = <&v2x_mu7 0 0>, <&v2x_mu7 1 0>;
> > > + mbox-names = "tx", "rx";
> > > + };
> > > + };
> > > +...
> > >
> > > --
> > > 2.34.1
> > >
More information about the linux-arm-kernel
mailing list