[PATCH v4] watchdog: stm32_iwdg: Add pretimeout support

[Marek Vasut]

On 4/15/24 3:48 PM, Marek Vasut wrote:
> The STM32MP15xx IWDG adds registers which permit this IP to generate
> pretimeout interrupt. This interrupt can also be used to wake the CPU
> from suspend. Implement support for generating this interrupt and let
> userspace configure the pretimeout. In case the pretimeout is not
> configured by user, set pretimeout to 3/4 of the WDT timeout cycle.
> 
> Reviewed-by: Clément Le Goffic <clement.legoffic at foss.st.com>
> Tested-by: Clément Le Goffic <clement.legoffic at foss.st.com>
> Signed-off-by: Marek Vasut <marex at denx.de>
> ---
> Cc: Alexandre Torgue <alexandre.torgue at foss.st.com>
> Cc: Guenter Roeck <linux at roeck-us.net>
> Cc: Maxime Coquelin <mcoquelin.stm32 at gmail.com>
> Cc: Wim Van Sebroeck <wim at linux-watchdog.org>
> Cc: linux-arm-kernel at lists.infradead.org
> Cc: linux-stm32 at st-md-mailman.stormreply.com
> Cc: linux-watchdog at vger.kernel.org
> ---
> V2: - Subtract the pretimeout value from timeout value before writing it
>        into the IWDG pretimeout register, because the watchdog counter
>        register is counting down, and the pretimeout interrupt triggers
>        when watchdog counter register matches the pretimeout register
>        content.
>      - Set default pretimeout to 3/4 of timeout .
> V3: - Use dev instead of pdev->dev
>      - Swap order of ret/return 0
>      - Split this from the DT changes, which are orthogonal
>      - Uh, this patch got stuck in upstreaming queue, sorry
> V4: - Update commit message to match V2 default pretimeout to 3/4
>      - Add RB/TB from Clément

Hi,

Are there still any open topics with this patch ?