[PATCH 3/3] arm64: dts: rockchip: Enable PinePhone Pro vibrator

[Peter Robinson]

The PinePhone Pro has a vibrator attached via GPIO so
lets enable it.

Signed-off-by: Peter Robinson <pbrobinson at gmail.com>
---
 arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts
index fbaf0202df632..8c2a4aaa635d0 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts
@@ -137,6 +137,12 @@ vcc1v8_codec: vcc1v8-codec-regulator {
 		vin-supply = <&vcc3v3_sys>;
 	};
 
+	vibrator {
+		compatible = "gpio-vibrator";
+		enable-gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_HIGH>;
+		vcc-supply = <&vcc3v3_sys>;
+	};
+
 	wifi_pwrseq: sdio-wifi-pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		clocks = <&rk818 1>;
-- 
2.45.2