[PATCH] ARM: spitz: fix GPIO assignment for backlight

[Dmitry Torokhov]

GPIOs controlling backlight on Spitz and Akita are coming from GPIO
expanders, not the pxa27xx-gpio block, correct it.

Additionally GPIO lookup tables operate with pin numbers rather than
legacy GPIO numbers, fix that as well. Use raw numbers instead of legacy
GPIO names to avoid confusion.

Fixes: ee0c8e494cc3 ("backlight: corgi: Convert to use GPIO descriptors")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov at gmail.com>
---

Linus, I am not sure if this is actually an issue, but I strongly
suspect that it is. I have no hardware, so no means to test it, sorry.

 arch/arm/mach-pxa/spitz.c | 30 ++++++++++--------------------
 1 file changed, 10 insertions(+), 20 deletions(-)

diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 3c5f5a3cb480..10ab16dcd827 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -520,10 +520,8 @@ static struct gpiod_lookup_table spitz_ads7846_gpio_table = {
 static struct gpiod_lookup_table spitz_lcdcon_gpio_table = {
 	.dev_id = "spi2.1",
 	.table = {
-		GPIO_LOOKUP("gpio-pxa", SPITZ_GPIO_BACKLIGHT_CONT,
-			    "BL_CONT", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", SPITZ_GPIO_BACKLIGHT_ON,
-			    "BL_ON", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("sharp-scoop.1", 6, "BL_CONT", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("sharp-scoop.1", 7, "BL_ON", GPIO_ACTIVE_HIGH),
 		{ },
 	},
 };
@@ -531,10 +529,8 @@ static struct gpiod_lookup_table spitz_lcdcon_gpio_table = {
 static struct gpiod_lookup_table akita_lcdcon_gpio_table = {
 	.dev_id = "spi2.1",
 	.table = {
-		GPIO_LOOKUP("gpio-pxa", AKITA_GPIO_BACKLIGHT_CONT,
-			    "BL_CONT", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", AKITA_GPIO_BACKLIGHT_ON,
-			    "BL_ON", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("i2c-max7310", 3, "BL_ON", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("i2c-max7310", 4, "BL_CONT", GPIO_ACTIVE_LOW),
 		{ },
 	},
 };
@@ -964,12 +960,9 @@ static inline void spitz_i2c_init(void) {}
 static struct gpiod_lookup_table spitz_audio_gpio_table = {
 	.dev_id = "spitz-audio",
 	.table = {
-		GPIO_LOOKUP("sharp-scoop.0", SPITZ_GPIO_MUTE_L - SPITZ_SCP_GPIO_BASE,
-			    "mute-l", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("sharp-scoop.0", SPITZ_GPIO_MUTE_R - SPITZ_SCP_GPIO_BASE,
-			    "mute-r", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("sharp-scoop.1", SPITZ_GPIO_MIC_BIAS - SPITZ_SCP2_GPIO_BASE,
-			    "mic", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("sharp-scoop.0", 3, "mute-l", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("sharp-scoop.0", 4, "mute-r", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("sharp-scoop.1", 8, "mic", GPIO_ACTIVE_HIGH),
 		{ },
 	},
 };
@@ -977,12 +970,9 @@ static struct gpiod_lookup_table spitz_audio_gpio_table = {
 static struct gpiod_lookup_table akita_audio_gpio_table = {
 	.dev_id = "spitz-audio",
 	.table = {
-		GPIO_LOOKUP("sharp-scoop.0", SPITZ_GPIO_MUTE_L - SPITZ_SCP_GPIO_BASE,
-			    "mute-l", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("sharp-scoop.0", SPITZ_GPIO_MUTE_R - SPITZ_SCP_GPIO_BASE,
-			    "mute-r", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("i2c-max7310", AKITA_GPIO_MIC_BIAS - AKITA_IOEXP_GPIO_BASE,
-			    "mic", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("sharp-scoop.0", 3, "mute-l", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("sharp-scoop.0", 4, "mute-r", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("i2c-max7310", 2, "mic", GPIO_ACTIVE_HIGH),
 		{ },
 	},
 };
-- 
2.45.2.741.gdbec12cfda-goog


-- 
Dmitry