[PATCH v2 3/3] arm64: dts: meson: add initial support for Dreambox One/Two
Christian Hewitt
christianshewitt at gmail.com
Sat Jun 22 07:01:12 PDT 2024
Dreambox One and Dreambox Two are based on the Amlogic W400 reference
board with an S922X chip and the following specs:
- 2GB DDR3 RAM
- 16GB eMMC
- 10/100/1000 Base-T Ethernet
- AP6356 Wireless (802.11 b/g/n/ac, BT 5.0)
- HDMI 2.1 video
- S/PDIF optical output
- 2x DVB-S2/T2
- Smartcard Reader Slot
- 2x USB 2.0 port (1x micro-USB for service)
- 1x USB 3.0 port
- IR receiver
- 1x Power LED (blue)
- 1x Power button (top)
- 1x Update/Reset button (underside)
- 1x micro SD card slot
Dreambox Two differences:
- 3" Colour LCD display (MIPI-DSI)
- Common Interface Slot
Signed-off-by: Christian Hewitt <christianshewitt at gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong at linaro.org>
---
Changes since v1:
- Move assigned-clocks under sound node as requested by Neil
arch/arm64/boot/dts/amlogic/Makefile | 2 +
.../dts/amlogic/meson-g12b-dreambox-one.dts | 17 ++
.../dts/amlogic/meson-g12b-dreambox-two.dts | 20 +++
.../boot/dts/amlogic/meson-g12b-dreambox.dtsi | 154 ++++++++++++++++++
4 files changed, 193 insertions(+)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-dreambox-one.dts
create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-dreambox-two.dts
create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-dreambox.dtsi
diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index 0746e01b5853..4addcae2c54e 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -21,6 +21,8 @@ dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-khadas-vim3.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-khadas-vim3-ts050.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-g12b-bananapi-cm4-cm4io.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-g12b-bananapi-cm4-mnt-reform2.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12b-dreambox-one.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12b-dreambox-two.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gsking-x.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking-pro.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking.dtb
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox-one.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox-one.dts
new file mode 100644
index 000000000000..ecfa1c683dde
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox-one.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Christian Hewitt <christianshewitt at gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-g12b-dreambox.dtsi"
+
+/ {
+ compatible = "dream,dreambox-one", "amlogic,s922x", "amlogic,g12b";
+ model = "Dreambox One";
+};
+
+&sd_emmc_a {
+ sd-uhs-sdr12;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox-two.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox-two.dts
new file mode 100644
index 000000000000..df0d71983c3d
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox-two.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Christian Hewitt <christianshewitt at gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-g12b-dreambox.dtsi"
+
+/ {
+ compatible = "dream,dreambox-two", "amlogic,s922x", "amlogic,g12b";
+ model = "Dreambox Two";
+};
+
+&sd_emmc_a {
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox.dtsi
new file mode 100644
index 000000000000..3a24c2411552
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox.dtsi
@@ -0,0 +1,154 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Christian Hewitt <christianshewitt at gmail.com>
+ */
+
+#include "meson-g12b-w400.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+ cvbs-connector {
+ status = "disabled";
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&gpio GPIOA_11 GPIO_ACTIVE_LOW>;
+ clocks = <&wifi32k>;
+ clock-names = "ext_clock";
+ };
+
+ spdif_dit: audio-codec-1 {
+ #sound-dai-cells = <0>;
+ compatible = "linux,spdif-dit";
+ status = "okay";
+ sound-name-prefix = "DIT";
+ };
+
+ sound {
+ compatible = "amlogic,axg-sound-card";
+ model = "DREAMBOX";
+ audio-aux-devs = <&tdmout_b>;
+ audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+ "TDMOUT_B IN 1", "FRDDR_B OUT 1",
+ "TDMOUT_B IN 2", "FRDDR_C OUT 1",
+ "TDM_B Playback", "TDMOUT_B OUT",
+ "SPDIFOUT_A IN 0", "FRDDR_A OUT 3",
+ "SPDIFOUT_A IN 1", "FRDDR_B OUT 3",
+ "SPDIFOUT_A IN 2", "FRDDR_C OUT 3";
+ assigned-clocks = <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>;
+ assigned-clock-parents = <0>, <0>, <0>;
+ assigned-clock-rates = <294912000>,
+ <270950400>,
+ <393216000>;
+
+ dai-link-0 {
+ sound-dai = <&frddr_a>;
+ };
+
+ dai-link-1 {
+ sound-dai = <&frddr_b>;
+ };
+
+ dai-link-2 {
+ sound-dai = <&frddr_c>;
+ };
+
+ /* 8ch hdmi interface */
+ dai-link-3 {
+ sound-dai = <&tdmif_b>;
+ dai-format = "i2s";
+ dai-tdm-slot-tx-mask-0 = <1 1>;
+ dai-tdm-slot-tx-mask-1 = <1 1>;
+ dai-tdm-slot-tx-mask-2 = <1 1>;
+ dai-tdm-slot-tx-mask-3 = <1 1>;
+ mclk-fs = <256>;
+
+ codec {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+ };
+ };
+
+ /* spdif hdmi or toslink interface */
+ dai-link-4 {
+ sound-dai = <&spdifout_a>;
+
+ codec-0 {
+ sound-dai = <&spdif_dit>;
+ };
+
+ codec-1 {
+ sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_A>;
+ };
+ };
+
+ /* spdif hdmi interface */
+ dai-link-5 {
+ sound-dai = <&spdifout_b>;
+
+ codec {
+ sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_B>;
+ };
+ };
+
+ /* hdmi glue */
+ dai-link-6 {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+ codec {
+ sound-dai = <&hdmi_tx>;
+ };
+ };
+ };
+};
+
+&arb {
+ status = "okay";
+};
+
+&frddr_a {
+ status = "okay";
+};
+
+&frddr_b {
+ status = "okay";
+};
+
+&frddr_c {
+ status = "okay";
+};
+
+&ir {
+ linux,rc-map-name = "rc-dreambox";
+};
+
+&saradc {
+ status = "okay";
+ vref-supply = <&vddao_1v8>;
+};
+
+&spdifout_a {
+ pinctrl-0 = <&spdif_out_h_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&spdifout_b {
+ status = "okay";
+};
+
+&tdmif_b {
+ status = "okay";
+};
+
+&tdmout_b {
+ status = "okay";
+};
+
+&tohdmitx {
+ status = "okay";
+};
--
2.34.1
More information about the linux-arm-kernel
mailing list