[PATCH] clk: imx: clk-imx8mp: Allow media_disp pixel clock reconfigure parent rate

[Marek Vasut]

On 6/21/24 7:52 PM, Adam Ford wrote:
> On Fri, May 31, 2024 at 3:36 PM Marek Vasut <marex at denx.de> wrote:
>>
>> The media_disp[12]_pix clock supply LCDIFv3 pixel clock output. These
>> clocks are usually the only downstream clock from Video PLL on i.MX8MP.
>> Allow these clocks to reconfigure the Video PLL, as that results in
>> accurate pixel clock. If the Video PLL is not reconfigured, the pixel
>> clock accuracy is low.
> 
> What happens if you have both a DSI (IMX8MP_CLK_MEDIA_DISP1_PIX) and
> an LVDS (IMX8MP_CLK_MEDIA_DISP2_PIX) display and both try to
> reconfigure their shared parent clock when their resolutions/clocks
> may not be the same?  I looked at doing that for the 8MP, but I was
> running into display issues.
> 
> For example, I was trying to test an 800x480 LVDS display which needed
> a pixel clock of 30MHz, and a DSI trying to run at 1920x1080 @
> 148.5MHz.

I have such a setup on my desk, I ended up putting one of the LCDIFs on 
Video PLL and the other on PLL3 (spare unused PLL) .