[PATCH] reset: zynqmp: allow building under COMPILE_TEST

[Philipp Zabel]

The ZynqMP reset driver can be compiled without ARCH_ZYNQMP being
enabled. Allow it to be built under COMPILE_TEST.

Signed-off-by: Philipp Zabel <p.zabel at pengutronix.de>
---
 drivers/reset/Kconfig  | 6 ++++++
 drivers/reset/Makefile | 2 +-
 2 files changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index 7112f5932609..9b914f8818ef 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -328,6 +328,12 @@ config RESET_ZYNQ
 	help
 	  This enables the reset controller driver for Xilinx Zynq SoCs.
 
+config RESET_ZYNQMP
+	bool "ZYNQMP Reset Driver" if COMPILE_TEST
+	default ARCH_ZYNQMP
+	help
+	  This enables the reset controller driver for Xilinx ZynqMP SoCs.
+
 source "drivers/reset/starfive/Kconfig"
 source "drivers/reset/sti/Kconfig"
 source "drivers/reset/hisilicon/Kconfig"
diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index fd8b49fa46fc..544ae3488e3f 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -41,4 +41,4 @@ obj-$(CONFIG_RESET_TN48M_CPLD) += reset-tn48m.o
 obj-$(CONFIG_RESET_UNIPHIER) += reset-uniphier.o
 obj-$(CONFIG_RESET_UNIPHIER_GLUE) += reset-uniphier-glue.o
 obj-$(CONFIG_RESET_ZYNQ) += reset-zynq.o
-obj-$(CONFIG_ARCH_ZYNQMP) += reset-zynqmp.o
+obj-$(CONFIG_RESET_ZYNQMP) += reset-zynqmp.o

---
base-commit: 1613e604df0cd359cf2a7fbd9be7a0bcfacfabd0
change-id: 20240621-reset-compile-zynqmp-6e6bedc658af

Best regards,
-- 
Philipp Zabel <p.zabel at pengutronix.de>