[PATCH RESEND v3 3/3] drm/stm: dsi: expose DSI PHY internal clock
Yannick FERTRE
yannick.fertre at foss.st.com
Fri Jun 21 05:51:21 PDT 2024
Hi Raphael,
thanks for the patch.
Acked-by: Yannick Fertre <yannick.fertre at foss.st.com>
Tested-by: Yannick Fertre <yannick.fertre at foss.st.com>
BR
Le 29/01/2024 à 11:41, Raphael Gallais-Pou a écrit :
> DSISRC __________
> __\_
> | \
> pll4_p_ck ->| 1 |____dsi_k
> ck_dsi_phy ->| 0 |
> |____/
>
> A DSI clock is missing in the clock framework. Looking at the
> clk_summary, it appears that 'ck_dsi_phy' is not implemented. Since the
> DSI kernel clock is based on the internal DSI pll. The common clock
> driver can not directly expose this 'ck_dsi_phy' clock because it does
> not contain any common registers with the DSI. Thus it needs to be done
> directly within the DSI phy driver.
>
> Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou at foss.st.com>
> ---
> Changes in v3:
> - Fix smatch warning:
> .../dw_mipi_dsi-stm.c:719 dw_mipi_dsi_stm_probe() warn: 'dsi->pclk'
> from clk_prepare_enable() not released on lines: 719.
> ---
> drivers/gpu/drm/stm/dw_mipi_dsi-stm.c | 247 ++++++++++++++++++++++----
> 1 file changed, 216 insertions(+), 31 deletions(-)
>
> diff --git a/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c b/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c
> index 82fff9e84345..b20123854c4a 100644
> --- a/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c
> +++ b/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c
> @@ -7,7 +7,9 @@
> */
>
> #include <linux/clk.h>
> +#include <linux/clk-provider.h>
> #include <linux/iopoll.h>
> +#include <linux/kernel.h>
> #include <linux/mod_devicetable.h>
> #include <linux/module.h>
> #include <linux/platform_device.h>
> @@ -77,9 +79,12 @@ enum dsi_color {
>
> struct dw_mipi_dsi_stm {
> void __iomem *base;
> + struct device *dev;
> struct clk *pllref_clk;
> struct clk *pclk;
> + struct clk_hw txbyte_clk;
> struct dw_mipi_dsi *dsi;
> + struct dw_mipi_dsi_plat_data pdata;
> u32 hw_version;
> int lane_min_kbps;
> int lane_max_kbps;
> @@ -196,29 +201,198 @@ static int dsi_pll_get_params(struct dw_mipi_dsi_stm *dsi,
> return 0;
> }
>
> -static int dw_mipi_dsi_phy_init(void *priv_data)
> +#define clk_to_dw_mipi_dsi_stm(clk) \
> + container_of(clk, struct dw_mipi_dsi_stm, txbyte_clk)
> +
> +static void dw_mipi_dsi_clk_disable(struct clk_hw *clk)
> {
> - struct dw_mipi_dsi_stm *dsi = priv_data;
> + struct dw_mipi_dsi_stm *dsi = clk_to_dw_mipi_dsi_stm(clk);
> +
> + DRM_DEBUG_DRIVER("\n");
> +
> + /* Disable the DSI PLL */
> + dsi_clear(dsi, DSI_WRPCR, WRPCR_PLLEN);
> +
> + /* Disable the regulator */
> + dsi_clear(dsi, DSI_WRPCR, WRPCR_REGEN | WRPCR_BGREN);
> +}
> +
> +static int dw_mipi_dsi_clk_enable(struct clk_hw *clk)
> +{
> + struct dw_mipi_dsi_stm *dsi = clk_to_dw_mipi_dsi_stm(clk);
> u32 val;
> int ret;
>
> + DRM_DEBUG_DRIVER("\n");
> +
> /* Enable the regulator */
> dsi_set(dsi, DSI_WRPCR, WRPCR_REGEN | WRPCR_BGREN);
> - ret = readl_poll_timeout(dsi->base + DSI_WISR, val, val & WISR_RRS,
> - SLEEP_US, TIMEOUT_US);
> + ret = readl_poll_timeout_atomic(dsi->base + DSI_WISR, val, val & WISR_RRS,
> + SLEEP_US, TIMEOUT_US);
> if (ret)
> DRM_DEBUG_DRIVER("!TIMEOUT! waiting REGU, let's continue\n");
>
> /* Enable the DSI PLL & wait for its lock */
> dsi_set(dsi, DSI_WRPCR, WRPCR_PLLEN);
> - ret = readl_poll_timeout(dsi->base + DSI_WISR, val, val & WISR_PLLLS,
> - SLEEP_US, TIMEOUT_US);
> + ret = readl_poll_timeout_atomic(dsi->base + DSI_WISR, val, val & WISR_PLLLS,
> + SLEEP_US, TIMEOUT_US);
> if (ret)
> DRM_DEBUG_DRIVER("!TIMEOUT! waiting PLL, let's continue\n");
>
> return 0;
> }
>
> +static int dw_mipi_dsi_clk_is_enabled(struct clk_hw *hw)
> +{
> + struct dw_mipi_dsi_stm *dsi = clk_to_dw_mipi_dsi_stm(hw);
> +
> + return dsi_read(dsi, DSI_WRPCR) & WRPCR_PLLEN;
> +}
> +
> +static unsigned long dw_mipi_dsi_clk_recalc_rate(struct clk_hw *hw,
> + unsigned long parent_rate)
> +{
> + struct dw_mipi_dsi_stm *dsi = clk_to_dw_mipi_dsi_stm(hw);
> + unsigned int idf, ndiv, odf, pll_in_khz, pll_out_khz;
> + u32 val;
> +
> + DRM_DEBUG_DRIVER("\n");
> +
> + pll_in_khz = (unsigned int)(parent_rate / 1000);
> +
> + val = dsi_read(dsi, DSI_WRPCR);
> +
> + idf = (val & WRPCR_IDF) >> 11;
> + if (!idf)
> + idf = 1;
> + ndiv = (val & WRPCR_NDIV) >> 2;
> + odf = int_pow(2, (val & WRPCR_ODF) >> 16);
> +
> + /* Get the adjusted pll out value */
> + pll_out_khz = dsi_pll_get_clkout_khz(pll_in_khz, idf, ndiv, odf);
> +
> + return (unsigned long)pll_out_khz * 1000;
> +}
> +
> +static long dw_mipi_dsi_clk_round_rate(struct clk_hw *hw, unsigned long rate,
> + unsigned long *parent_rate)
> +{
> + struct dw_mipi_dsi_stm *dsi = clk_to_dw_mipi_dsi_stm(hw);
> + unsigned int idf, ndiv, odf, pll_in_khz, pll_out_khz;
> + int ret;
> +
> + DRM_DEBUG_DRIVER("\n");
> +
> + pll_in_khz = (unsigned int)(*parent_rate / 1000);
> +
> + /* Compute best pll parameters */
> + idf = 0;
> + ndiv = 0;
> + odf = 0;
> +
> + ret = dsi_pll_get_params(dsi, pll_in_khz, rate / 1000,
> + &idf, &ndiv, &odf);
> + if (ret)
> + DRM_WARN("Warning dsi_pll_get_params(): bad params\n");
> +
> + /* Get the adjusted pll out value */
> + pll_out_khz = dsi_pll_get_clkout_khz(pll_in_khz, idf, ndiv, odf);
> +
> + return pll_out_khz * 1000;
> +}
> +
> +static int dw_mipi_dsi_clk_set_rate(struct clk_hw *hw, unsigned long rate,
> + unsigned long parent_rate)
> +{
> + struct dw_mipi_dsi_stm *dsi = clk_to_dw_mipi_dsi_stm(hw);
> + unsigned int idf, ndiv, odf, pll_in_khz, pll_out_khz;
> + int ret;
> + u32 val;
> +
> + DRM_DEBUG_DRIVER("\n");
> +
> + pll_in_khz = (unsigned int)(parent_rate / 1000);
> +
> + /* Compute best pll parameters */
> + idf = 0;
> + ndiv = 0;
> + odf = 0;
> +
> + ret = dsi_pll_get_params(dsi, pll_in_khz, rate / 1000, &idf, &ndiv, &odf);
> + if (ret)
> + DRM_WARN("Warning dsi_pll_get_params(): bad params\n");
> +
> + /* Get the adjusted pll out value */
> + pll_out_khz = dsi_pll_get_clkout_khz(pll_in_khz, idf, ndiv, odf);
> +
> + /* Set the PLL division factors */
> + dsi_update_bits(dsi, DSI_WRPCR, WRPCR_NDIV | WRPCR_IDF | WRPCR_ODF,
> + (ndiv << 2) | (idf << 11) | ((ffs(odf) - 1) << 16));
> +
> + /* Compute uix4 & set the bit period in high-speed mode */
> + val = 4000000 / pll_out_khz;
> + dsi_update_bits(dsi, DSI_WPCR0, WPCR0_UIX4, val);
> +
> + return 0;
> +}
> +
> +static void dw_mipi_dsi_clk_unregister(void *data)
> +{
> + struct dw_mipi_dsi_stm *dsi = data;
> +
> + DRM_DEBUG_DRIVER("\n");
> +
> + of_clk_del_provider(dsi->dev->of_node);
> + clk_hw_unregister(&dsi->txbyte_clk);
> +}
> +
> +static const struct clk_ops dw_mipi_dsi_stm_clk_ops = {
> + .enable = dw_mipi_dsi_clk_enable,
> + .disable = dw_mipi_dsi_clk_disable,
> + .is_enabled = dw_mipi_dsi_clk_is_enabled,
> + .recalc_rate = dw_mipi_dsi_clk_recalc_rate,
> + .round_rate = dw_mipi_dsi_clk_round_rate,
> + .set_rate = dw_mipi_dsi_clk_set_rate,
> +};
> +
> +static struct clk_init_data cdata_init = {
> + .name = "ck_dsi_phy",
> + .ops = &dw_mipi_dsi_stm_clk_ops,
> + .parent_names = (const char * []) {"ck_hse"},
> + .num_parents = 1,
> +};
> +
> +static int dw_mipi_dsi_clk_register(struct dw_mipi_dsi_stm *dsi,
> + struct device *dev)
> +{
> + struct device_node *node = dev->of_node;
> + int ret;
> +
> + DRM_DEBUG_DRIVER("Registering clk\n");
> +
> + dsi->txbyte_clk.init = &cdata_init;
> +
> + ret = clk_hw_register(dev, &dsi->txbyte_clk);
> + if (ret)
> + return ret;
> +
> + ret = of_clk_add_hw_provider(node, of_clk_hw_simple_get,
> + &dsi->txbyte_clk);
> + if (ret)
> + clk_hw_unregister(&dsi->txbyte_clk);
> +
> + return ret;
> +}
> +
> +static int dw_mipi_dsi_phy_init(void *priv_data)
> +{
> + struct dw_mipi_dsi_stm *dsi = priv_data;
> + int ret;
> +
> + ret = clk_prepare_enable(dsi->txbyte_clk.clk);
> + return ret;
> +}
> +
> static void dw_mipi_dsi_phy_power_on(void *priv_data)
> {
> struct dw_mipi_dsi_stm *dsi = priv_data;
> @@ -235,6 +409,8 @@ static void dw_mipi_dsi_phy_power_off(void *priv_data)
>
> DRM_DEBUG_DRIVER("\n");
>
> + clk_disable_unprepare(dsi->txbyte_clk.clk);
> +
> /* Disable the DSI wrapper */
> dsi_clear(dsi, DSI_WCR, WCR_DSIEN);
> }
> @@ -245,9 +421,8 @@ dw_mipi_dsi_get_lane_mbps(void *priv_data, const struct drm_display_mode *mode,
> unsigned int *lane_mbps)
> {
> struct dw_mipi_dsi_stm *dsi = priv_data;
> - unsigned int idf, ndiv, odf, pll_in_khz, pll_out_khz;
> + unsigned int pll_in_khz, pll_out_khz;
> int ret, bpp;
> - u32 val;
>
> pll_in_khz = (unsigned int)(clk_get_rate(dsi->pllref_clk) / 1000);
>
> @@ -268,25 +443,10 @@ dw_mipi_dsi_get_lane_mbps(void *priv_data, const struct drm_display_mode *mode,
> DRM_WARN("Warning min phy mbps is used\n");
> }
>
> - /* Compute best pll parameters */
> - idf = 0;
> - ndiv = 0;
> - odf = 0;
> - ret = dsi_pll_get_params(dsi, pll_in_khz, pll_out_khz,
> - &idf, &ndiv, &odf);
> + ret = clk_set_rate((dsi->txbyte_clk.clk), pll_out_khz * 1000);
> if (ret)
> - DRM_WARN("Warning dsi_pll_get_params(): bad params\n");
> -
> - /* Get the adjusted pll out value */
> - pll_out_khz = dsi_pll_get_clkout_khz(pll_in_khz, idf, ndiv, odf);
> -
> - /* Set the PLL division factors */
> - dsi_update_bits(dsi, DSI_WRPCR, WRPCR_NDIV | WRPCR_IDF | WRPCR_ODF,
> - (ndiv << 2) | (idf << 11) | ((ffs(odf) - 1) << 16));
> -
> - /* Compute uix4 & set the bit period in high-speed mode */
> - val = 4000000 / pll_out_khz;
> - dsi_update_bits(dsi, DSI_WPCR0, WPCR0_UIX4, val);
> + DRM_DEBUG_DRIVER("ERROR Could not set rate of %d to %s clk->name",
> + pll_out_khz, clk_hw_get_name(&dsi->txbyte_clk));
>
> /* Select video mode by resetting DSIM bit */
> dsi_clear(dsi, DSI_WCFGR, WCFGR_DSIM);
> @@ -445,6 +605,7 @@ static int dw_mipi_dsi_stm_probe(struct platform_device *pdev)
> {
> struct device *dev = &pdev->dev;
> struct dw_mipi_dsi_stm *dsi;
> + const struct dw_mipi_dsi_plat_data *pdata = of_device_get_match_data(dev);
> int ret;
>
> dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL);
> @@ -514,18 +675,41 @@ static int dw_mipi_dsi_stm_probe(struct platform_device *pdev)
> dsi->lane_max_kbps *= 2;
> }
>
> - dw_mipi_dsi_stm_plat_data.base = dsi->base;
> - dw_mipi_dsi_stm_plat_data.priv_data = dsi;
> + dsi->pdata = *pdata;
> + dsi->pdata.base = dsi->base;
> + dsi->pdata.priv_data = dsi;
> +
> + dsi->pdata.max_data_lanes = 2;
> + dsi->pdata.phy_ops = &dw_mipi_dsi_stm_phy_ops;
>
> platform_set_drvdata(pdev, dsi);
>
> - dsi->dsi = dw_mipi_dsi_probe(pdev, &dw_mipi_dsi_stm_plat_data);
> + dsi->dsi = dw_mipi_dsi_probe(pdev, &dsi->pdata);
> if (IS_ERR(dsi->dsi)) {
> ret = PTR_ERR(dsi->dsi);
> dev_err_probe(dev, ret, "Failed to initialize mipi dsi host\n");
> goto err_dsi_probe;
> }
>
> + /*
> + * We need to wait for the generic bridge to probe before enabling and
> + * register the internal pixel clock.
> + */
> + ret = clk_prepare_enable(dsi->pclk);
> + if (ret) {
> + DRM_ERROR("%s: Failed to enable peripheral clk\n", __func__);
> + goto err_dsi_probe;
> + }
> +
> + ret = dw_mipi_dsi_clk_register(dsi, dev);
> + if (ret) {
> + DRM_ERROR("Failed to register DSI pixel clock: %d\n", ret);
> + clk_disable_unprepare(dsi->pclk);
> + goto err_dsi_probe;
> + }
> +
> + clk_disable_unprepare(dsi->pclk);
> +
> return 0;
>
> err_dsi_probe:
> @@ -542,12 +726,13 @@ static void dw_mipi_dsi_stm_remove(struct platform_device *pdev)
>
> dw_mipi_dsi_remove(dsi->dsi);
> clk_disable_unprepare(dsi->pllref_clk);
> + dw_mipi_dsi_clk_unregister(dsi);
> regulator_disable(dsi->vdd_supply);
> }
>
> static int dw_mipi_dsi_stm_suspend(struct device *dev)
> {
> - struct dw_mipi_dsi_stm *dsi = dw_mipi_dsi_stm_plat_data.priv_data;
> + struct dw_mipi_dsi_stm *dsi = dev_get_drvdata(dev);
>
> DRM_DEBUG_DRIVER("\n");
>
> @@ -560,7 +745,7 @@ static int dw_mipi_dsi_stm_suspend(struct device *dev)
>
> static int dw_mipi_dsi_stm_resume(struct device *dev)
> {
> - struct dw_mipi_dsi_stm *dsi = dw_mipi_dsi_stm_plat_data.priv_data;
> + struct dw_mipi_dsi_stm *dsi = dev_get_drvdata(dev);
> int ret;
>
> DRM_DEBUG_DRIVER("\n");
More information about the linux-arm-kernel
mailing list