[PATCH net-next v8 12/13] net: phy: mediatek: Fix alignment in callback functions' hook

[Sky Huang]

From: "SkyLake.Huang" <skylake.huang at mediatek.com>

Align declarations in mtk_gephy_driver(mtk-ge.c) and
mtk_socphy_driver(mtk-ge-soc.c). At first, some of them are
".foo<tab>= method_foo", and others are ".bar<space>= method_bar".
Use space instead for all of them here in case line is longer than
80 chars.

Signed-off-by: SkyLake.Huang <skylake.huang at mediatek.com>
---
 drivers/net/phy/mediatek/mtk-ge-soc.c | 40 +++++++++++++--------------
 drivers/net/phy/mediatek/mtk-ge.c     | 34 +++++++++++------------
 2 files changed, 37 insertions(+), 37 deletions(-)

diff --git a/drivers/net/phy/mediatek/mtk-ge-soc.c b/drivers/net/phy/mediatek/mtk-ge-soc.c
index 59c815e..fc33729 100644
--- a/drivers/net/phy/mediatek/mtk-ge-soc.c
+++ b/drivers/net/phy/mediatek/mtk-ge-soc.c
@@ -1399,17 +1399,17 @@ static int mt7981_phy_probe(struct phy_device *phydev)
 static struct phy_driver mtk_socphy_driver[] = {
 	{
 		PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7981),
-		.name		= "MediaTek MT7981 PHY",
-		.config_init	= mt798x_phy_config_init,
-		.read_status	= mtk_gphy_cl22_read_status,
-		.config_intr	= genphy_no_config_intr,
+		.name = "MediaTek MT7981 PHY",
+		.config_init = mt798x_phy_config_init,
+		.read_status = mtk_gphy_cl22_read_status,
+		.config_intr = genphy_no_config_intr,
 		.handle_interrupt = genphy_handle_interrupt_no_ack,
-		.probe		= mt7981_phy_probe,
-		.suspend	= genphy_suspend,
-		.resume		= genphy_resume,
-		.read_page	= mtk_phy_read_page,
-		.write_page	= mtk_phy_write_page,
-		.led_blink_set	= mt798x_phy_led_blink_set,
+		.probe = mt7981_phy_probe,
+		.suspend = genphy_suspend,
+		.resume = genphy_resume,
+		.read_page = mtk_phy_read_page,
+		.write_page = mtk_phy_write_page,
+		.led_blink_set = mt798x_phy_led_blink_set,
 		.led_brightness_set = mt798x_phy_led_brightness_set,
 		.led_hw_is_supported = mt798x_phy_led_hw_is_supported,
 		.led_hw_control_set = mt798x_phy_led_hw_control_set,
@@ -1417,17 +1417,17 @@ static struct phy_driver mtk_socphy_driver[] = {
 	},
 	{
 		PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7988),
-		.name		= "MediaTek MT7988 PHY",
-		.config_init	= mt798x_phy_config_init,
-		.read_status	= mtk_gphy_cl22_read_status,
-		.config_intr	= genphy_no_config_intr,
+		.name = "MediaTek MT7988 PHY",
+		.config_init = mt798x_phy_config_init,
+		.read_status = mtk_gphy_cl22_read_status,
+		.config_intr = genphy_no_config_intr,
 		.handle_interrupt = genphy_handle_interrupt_no_ack,
-		.probe		= mt7988_phy_probe,
-		.suspend	= genphy_suspend,
-		.resume		= genphy_resume,
-		.read_page	= mtk_phy_read_page,
-		.write_page	= mtk_phy_write_page,
-		.led_blink_set	= mt798x_phy_led_blink_set,
+		.probe = mt7988_phy_probe,
+		.suspend = genphy_suspend,
+		.resume = genphy_resume,
+		.read_page = mtk_phy_read_page,
+		.write_page = mtk_phy_write_page,
+		.led_blink_set = mt798x_phy_led_blink_set,
 		.led_brightness_set = mt798x_phy_led_brightness_set,
 		.led_hw_is_supported = mt798x_phy_led_hw_is_supported,
 		.led_hw_control_set = mt798x_phy_led_hw_control_set,
diff --git a/drivers/net/phy/mediatek/mtk-ge.c b/drivers/net/phy/mediatek/mtk-ge.c
index ea85c94..07b5b22 100644
--- a/drivers/net/phy/mediatek/mtk-ge.c
+++ b/drivers/net/phy/mediatek/mtk-ge.c
@@ -198,35 +198,35 @@ static int mt753x_phy_led_hw_control_set(struct phy_device *phydev, u8 index,
 static struct phy_driver mtk_gephy_driver[] = {
 	{
 		PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7530),
-		.name		= "MediaTek MT7530 PHY",
-		.config_init	= mt7530_phy_config_init,
+		.name = "MediaTek MT7530 PHY",
+		.config_init = mt7530_phy_config_init,
 		/* Interrupts are handled by the switch, not the PHY
 		 * itself.
 		 */
-		.config_intr	= genphy_no_config_intr,
+		.config_intr = genphy_no_config_intr,
 		.handle_interrupt = genphy_handle_interrupt_no_ack,
-		.suspend	= genphy_suspend,
-		.resume		= genphy_resume,
-		.read_page	= mtk_phy_read_page,
-		.write_page	= mtk_phy_write_page,
+		.suspend = genphy_suspend,
+		.resume = genphy_resume,
+		.read_page = mtk_phy_read_page,
+		.write_page = mtk_phy_write_page,
 		.led_hw_is_supported = mt753x_phy_led_hw_is_supported,
 	},
 	{
 		PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7531),
-		.name		= "MediaTek MT7531 PHY",
-		.probe		= mt7531_phy_probe,
-		.config_init	= mt7531_phy_config_init,
-		.read_status	= mtk_gphy_cl22_read_status,
+		.name = "MediaTek MT7531 PHY",
+		.probe = mt7531_phy_probe,
+		.config_init = mt7531_phy_config_init,
+		.read_status = mtk_gphy_cl22_read_status,
 		/* Interrupts are handled by the switch, not the PHY
 		 * itself.
 		 */
-		.config_intr	= genphy_no_config_intr,
+		.config_intr = genphy_no_config_intr,
 		.handle_interrupt = genphy_handle_interrupt_no_ack,
-		.suspend	= genphy_suspend,
-		.resume		= genphy_resume,
-		.read_page	= mtk_phy_read_page,
-		.write_page	= mtk_phy_write_page,
-		.led_blink_set	= mt753x_phy_led_blink_set,
+		.suspend = genphy_suspend,
+		.resume = genphy_resume,
+		.read_page = mtk_phy_read_page,
+		.write_page = mtk_phy_write_page,
+		.led_blink_set = mt753x_phy_led_blink_set,
 		.led_brightness_set = mt753x_phy_led_brightness_set,
 		.led_hw_is_supported = mt753x_phy_led_hw_is_supported,
 		.led_hw_control_set = mt753x_phy_led_hw_control_set,
-- 
2.34.1