[PATCH 2/2] mmc: sdhci-of-ma35d1: Add Novoton MA35D1 SDHCI driver
Philipp Zabel
p.zabel at pengutronix.de
Fri Jun 21 04:45:30 PDT 2024
On Mi, 2024-06-19 at 13:46 +0800, Shan-Chun Hung wrote:
> This adds the SDHCI driver for the MA35 series SoC. It is based upon the
> SDHCI interface, but requires some extra initialization.
>
> Signed-off-by: schung <schung at nuvoton.com>
> ---
> drivers/mmc/host/Kconfig | 13 ++
> drivers/mmc/host/Makefile | 1 +
> drivers/mmc/host/sdhci-of-ma35d1.c | 297 +++++++++++++++++++++++++++++
> 3 files changed, 311 insertions(+)
> create mode 100644 drivers/mmc/host/sdhci-of-ma35d1.c
>
[...]
> diff --git a/drivers/mmc/host/sdhci-of-ma35d1.c b/drivers/mmc/host/sdhci-of-ma35d1.c
> new file mode 100644
> index 000000000000..7714a5ab463d
> --- /dev/null
> +++ b/drivers/mmc/host/sdhci-of-ma35d1.c
> @@ -0,0 +1,297 @@
[...]
> +static int ma35_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct sdhci_pltfm_host *pltfm_host;
> + struct sdhci_host *host;
> + struct ma35_priv *priv;
> + int err;
> + u32 extra, ctl;
> +
> + host = sdhci_pltfm_init(pdev, &sdhci_ma35_pdata,
> + sizeof(struct ma35_priv));
> + if (IS_ERR(host))
> + return PTR_ERR(host);
> +
> + /*
> + * extra adma table cnt for cross 128M boundary handling.
> + */
> + extra = DIV_ROUND_UP_ULL(dma_get_required_mask(&pdev->dev), SZ_128M);
> + if (extra > SDHCI_MAX_SEGS)
> + extra = SDHCI_MAX_SEGS;
> + host->adma_table_cnt += extra;
> + pltfm_host = sdhci_priv(host);
> + priv = sdhci_pltfm_priv(pltfm_host);
> +
> + if (dev->of_node) {
> + pltfm_host->clk = devm_clk_get(&pdev->dev, NULL);
> + if (IS_ERR(pltfm_host->clk)) {
> + err = PTR_ERR(pltfm_host->clk);
> + dev_err(&pdev->dev, "failed to get clk: %d\n", err);
> + goto free_pltfm;
> + }
> + err = clk_prepare_enable(pltfm_host->clk);
> + if (err)
> + goto free_pltfm;
> + }
> +
> + err = mmc_of_parse(host->mmc);
> + if (err)
> + goto err_clk;
> +
> + priv->rst = devm_reset_control_get(&pdev->dev, NULL);
Please use devm_reset_control_get_exclusive() instead.
regards
Philipp
More information about the linux-arm-kernel
mailing list