[PATCH 2/3] arm64: dts: ti: k3-am62p: Add gpio-ranges properties

[Nishanth Menon]

On the AM62P platform we have no single 1:1 relation regarding index
of GPIO and pin controller. The GPIOs and pin controller registers
have mapping and holes in the map. These have been extracted from the
AM62P data sheet.

Mux mode input is selected as it is bi-directional. In case a specific
pull type or a specific pin level drive setting is desired, the board
device tree files will have to explicitly mux those pins for the GPIO
with the desired setting.

Ref: AM62P Data sheet https://www.ti.com/lit/gpn/am62p

Signed-off-by: Nishanth Menon <nm at ti.com>
---

Note: this generates a 'too large' warning for
pinctrl-single,gpio-ranges -
https://lore.kernel.org/r/20240618165102.2380159-1-nm@ti.com/ for more
details

 arch/arm64/boot/dts/ti/k3-am62p-main.dtsi | 14 ++++++++++++++
 arch/arm64/boot/dts/ti/k3-am62p-mcu.dtsi  | 10 ++++++++++
 2 files changed, 24 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi
index eed06506f617..573c85486db1 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi
@@ -258,7 +258,17 @@ main_pmx0: pinctrl at f4000 {
 		#pinctrl-cells = <1>;
 		pinctrl-single,register-width = <32>;
 		pinctrl-single,function-mask = <0xffffffff>;
+		pinctrl-single,gpio-range =
+			<&main_pmx0_range 0 32 (PIN_INPUT | PIN_GPIO_MUX_MODE)>,
+			<&main_pmx0_range 33 92 (PIN_INPUT | PIN_GPIO_MUX_MODE)>,
+			<&main_pmx0_range 137 5 (PIN_INPUT | PIN_GPIO_MUX_MODE)>,
+			<&main_pmx0_range 143 3 (PIN_INPUT | PIN_GPIO_MUX_MODE)>,
+			<&main_pmx0_range 149 2 (PIN_INPUT | PIN_GPIO_MUX_MODE)>;
 		bootph-all;
+
+		main_pmx0_range: gpio-range {
+			#pinctrl-single,gpio-range-cells = <3>;
+		};
 	};
 
 	main_esm: esm at 420000 {
@@ -543,6 +553,8 @@ main_gpio0: gpio at 600000 {
 		power-domains = <&k3_pds 77 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 77 0>;
 		clock-names = "gpio";
+		gpio-ranges = <&main_pmx0 0 0 32>, <&main_pmx0 32 33 38>,
+				<&main_pmx0 70 72 22>;
 	};
 
 	main_gpio1: gpio at 601000 {
@@ -560,6 +572,8 @@ main_gpio1: gpio at 601000 {
 		power-domains = <&k3_pds 78 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 78 0>;
 		clock-names = "gpio";
+		gpio-ranges = <&main_pmx0 0 94 32>, <&main_pmx0 42 137 5>,
+				<&main_pmx0 47 143 3>, <&main_pmx0 50 149 2>;
 	};
 
 	sdhci0: mmc at fa10000 {
diff --git a/arch/arm64/boot/dts/ti/k3-am62p-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-mcu.dtsi
index b973b550eb9d..a27dd12b44ac 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62p-mcu.dtsi
@@ -11,7 +11,15 @@ mcu_pmx0: pinctrl at 4084000 {
 		#pinctrl-cells = <1>;
 		pinctrl-single,register-width = <32>;
 		pinctrl-single,function-mask = <0xffffffff>;
+		pinctrl-single,gpio-range =
+			<&mcu_pmx_range 0 21 (PIN_INPUT | PIN_GPIO_MUX_MODE)>,
+			<&mcu_pmx_range 23 1 (PIN_INPUT | PIN_GPIO_MUX_MODE)>,
+			<&mcu_pmx_range 32 2 (PIN_INPUT | PIN_GPIO_MUX_MODE)>;
 		bootph-all;
+
+		mcu_pmx_range: gpio-range {
+			#pinctrl-single,gpio-range-cells = <3>;
+		};
 	};
 
 	mcu_esm: esm at 4100000 {
@@ -137,6 +145,8 @@ mcu_gpio0: gpio at 4201000 {
 		power-domains = <&k3_pds 79 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 79 0>;
 		clock-names = "gpio";
+		gpio-ranges = <&mcu_pmx0 0 0 21>, <&mcu_pmx0 21 23 1>,
+				<&mcu_pmx0 22 32 2>;
 	};
 
 	mcu_rti0: watchdog at 4880000 {
-- 
2.43.0